Re: [PATCH] i386/audit: stop scribbling on the stack frame

[Eric Paris]

On Thu, 2014-10-23 at 15:30 -0400, Eric Paris wrote:
> On Thu, 2014-10-23 at 12:20 -0700, Andy Lutomirski wrote:
> > On Thu, Oct 23, 2014 at 12:15 PM, Eric Paris <eparis@xxxxxxxxxx> wrote:
> > > On Thu, 2014-10-23 at 11:39 -0700, Andy Lutomirski wrote:
> > >> On 10/22/2014 09:04 PM, Eric Paris wrote:
> > >> > git commit b4f0d3755c5e9cc86292d5fd78261903b4f23d4a was very very dumb.
> > >> > It was writing over %esp/pt_regs semi-randomly on i686  with the expected
> > >> > "system can't boot" results.  As noted in:
> > >> >
> > >> > https://bugs.freedesktop.org/show_bug.cgi?id=85277
> > >> >
> > >> > This patch stops fscking with pt_regs.  Instead it sets up the registers
> > >> > for the call to __audit_syscall_entry in the most obvious conceivable
> > >> > way.  It then does just a tiny tiny touch of magic.  We need to get what
> > >> > started in PT_EDX into 0(%esp) and PT_ESI into 4(%esp).  This is as easy
> > >> > as a pair of pushes.
> > >> >
> > >> > After the call to __audit_syscall_entry all we need to do is get that
> > >> > now useless junk off the stack (pair of pops) and reload %eax with the
> > >> > original syscall so other stuff can keep going about it's business.
> > >> >
> > >> > Signed-off-by: Eric Paris <eparis@xxxxxxxxxx>
> > >> > Cc: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
> > >> > Cc: Ingo Molnar <mingo@xxxxxxxxxx>
> > >> > Cc: "H. Peter Anvin" <hpa@xxxxxxxxx>
> > >> > Cc: x86@xxxxxxxxxx
> > >> > Cc: linux-kernel@xxxxxxxxxxxxxxx
> > >> > Cc: linux-audit@xxxxxxxxxx
> > >> > ---
> > >> >  arch/x86/kernel/entry_32.S | 15 +++++++--------
> > >> >  1 file changed, 7 insertions(+), 8 deletions(-)
> > >> >
> > >> > diff --git a/arch/x86/kernel/entry_32.S b/arch/x86/kernel/entry_32.S
> > >> > index f9e3fab..fb01d22 100644
> > >> > --- a/arch/x86/kernel/entry_32.S
> > >> > +++ b/arch/x86/kernel/entry_32.S
> > >> > @@ -447,15 +447,14 @@ sysenter_exit:
> > >> >  sysenter_audit:
> > >> >     testl $(_TIF_WORK_SYSCALL_ENTRY & ~_TIF_SYSCALL_AUDIT),TI_flags(%ebp)
> > >> >     jnz syscall_trace_entry
> > >> > -   addl $4,%esp
> > >> > -   CFI_ADJUST_CFA_OFFSET -4
> > >> > -   movl %esi,4(%esp)               /* 5th arg: 4th syscall arg */
> > >> > -   movl %edx,(%esp)                /* 4th arg: 3rd syscall arg */
> > >> > -   /* %ecx already in %ecx            3rd arg: 2nd syscall arg */
> > >> > -   movl %ebx,%edx                  /* 2nd arg: 1st syscall arg */
> > >> > -   /* %eax already in %eax            1st arg: syscall number */
> > >> > +   /* movl PT_EAX(%esp), %eax      already set, syscall number: 1st arg to audit */
> > >> > +   movl PT_EBX(%esp), %edx         /* ebx/a0: 2nd arg to audit */
> > >> > +   /* movl PT_ECX(%esp), %ecx      already set, a1: 3nd arg to audit */
> > >> > +   pushl_cfi PT_ESI(%esp)          /* a3: 5th arg */
> > >> > +   pushl_cfi PT_EDX+4(%esp)        /* a2: 4th arg */
> > >> >     call __audit_syscall_entry
> > >> > -   pushl_cfi %ebx
> > >> > +   popl_cfi %ecx /* get that remapped edx off the stack */
> > >> > +   popl_cfi %ecx /* get that remapped esi off the stack */
> > >> >     movl PT_EAX(%esp),%eax          /* reload syscall number */
> > >> >     jmp sysenter_do_call
> > >> >
> > >> >
> > >>
> > >> This looks reasonably likely to be correct, but this code is complicated
> > >> and now ever slower.
> > >
> > > I guess I could just use push/pop and do the CFI_ADJUST_CFA_OFFSET by
> > > hand.  But I figured this was reasonable enough...
> > >
> > 
> > I'm not complaining about your new assembly in particular.  There's
> > just too much assembly in there in general.
> > 
> > But I feel like I'm missing something in the new code.  Aren't you
> > corrupting ecx with those popl_cfi insns?
> 
> After the call __audit_syscall_entry aren't they already polluted?
> Isn't that the reason we need to reload EAX?

Well, I guess EAX is special...

>   You can verify this leaves
> things in a similar state (although slightly differently polluted) than
> before it got screwed up.  Here is diff between before the breakage and
> what I propose we do now.
> 
> (I admit I don't understand how the pushl_cfi %ebx wasn't messing up
> PT_EBX)
> 
> /me anxiously awaits x86 guy to tell me how dumb I am....
> 
> $ git diff a17c8b54dc738c4fda31e8be0302cd131a04c19f -- arch/x86/kernel/entry_32.S
> diff --git a/arch/x86/kernel/entry_32.S b/arch/x86/kernel/entry_32.S
> index 0d0c9d4..fb01d22 100644
> --- a/arch/x86/kernel/entry_32.S
> +++ b/arch/x86/kernel/entry_32.S
> @@ -447,16 +447,14 @@ sysenter_exit:
>  sysenter_audit:
>         testl $(_TIF_WORK_SYSCALL_ENTRY & ~_TIF_SYSCALL_AUDIT),TI_flags(%ebp)
>         jnz syscall_trace_entry
> -       addl $4,%esp
> -       CFI_ADJUST_CFA_OFFSET -4
> -       /* %esi already in 8(%esp)         6th arg: 4th syscall arg */
> -       /* %edx already in 4(%esp)         5th arg: 3rd syscall arg */
> -       /* %ecx already in 0(%esp)         4th arg: 2nd syscall arg */
> -       movl %ebx,%ecx                  /* 3rd arg: 1st syscall arg */
> -       movl %eax,%edx                  /* 2nd arg: syscall number */
> -       movl $AUDIT_ARCH_I386,%eax      /* 1st arg: audit arch */
> +       /* movl PT_EAX(%esp), %eax      already set, syscall number: 1st arg to audit */
> +       movl PT_EBX(%esp), %edx         /* ebx/a0: 2nd arg to audit */
> +       /* movl PT_ECX(%esp), %ecx      already set, a1: 3nd arg to audit */
> +       pushl_cfi PT_ESI(%esp)          /* a3: 5th arg */
> +       pushl_cfi PT_EDX+4(%esp)        /* a2: 4th arg */
>         call __audit_syscall_entry
> -       pushl_cfi %ebx
> +       popl_cfi %ecx /* get that remapped edx off the stack */
> +       popl_cfi %ecx /* get that remapped esi off the stack */
>         movl PT_EAX(%esp),%eax          /* reload syscall number */
>         jmp sysenter_do_call
> 


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/