[LKP] [virtio_blk] kernel BUG at drivers/virtio/virtio.c:116!
From: kernel test robot
Date: Sun Oct 26 2014 - 22:17:05 EST
FYI, we noticed the below changes on
git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost.git vhost-next
commit 067da47bd4572e15532e303b6ced799540654589 ("virtio_blk: v1.0 support")
+------------------------------------------+------------+------------+
| | bea3a62baf | 067da47bd4 |
+------------------------------------------+------------+------------+
| boot_successes | 15 | 10 |
| early-boot-hang | 1 | |
| boot_failures | 0 | 5 |
| kernel_BUG_at_drivers/virtio/virtio.c | 0 | 5 |
| invalid_opcode | 0 | 5 |
| RIP:virtio_check_driver_offered_feature | 0 | 5 |
| Kernel_panic-not_syncing:Fatal_exception | 0 | 5 |
| backtrace:init | 0 | 5 |
| backtrace:kernel_init_freeable | 0 | 5 |
+------------------------------------------+------------+------------+
Thanks,
Fengguang
early console in setup code
early console in decompress_kernel
Decompressing Linux... Parsing ELF... done.
Booting the kernel.
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.18.0-rc1-g84d2686 (kbuild@xian) (gcc version 4.9.1 (Debian 4.9.1-11) ) #159 SMP Fri Oct 24 01:28:28 CST 2014
[ 0.000000] Command line: user=lkp job=/lkp/scheduled/vm-kbuild-yocto-x86_64-62/rand_boot-performance-1-yocto-minimal-x86_64.cgz-x86_64-nfsroot-84d2686f2c283d54b7574fcfba9727306328942a-0.yaml ARCH=x86_64 BOOT_IMAGE=/kernel/x86_64-nfsroot/84d2686f2c283d54b7574fcfba9727306328942a/vmlinuz-3.18.0-rc1-g84d2686 kconfig=x86_64-nfsroot commit=84d2686f2c283d54b7574fcfba9727306328942a branch=linux-devel/devel-xian-x86_64-201410240123 root=/dev/ram0 max_uptime=3600 RESULT_ROOT=/result/vm-kbuild-yocto-x86_64/boot/performance-1/yocto-minimal-x86_64.cgz/x86_64-nfsroot/84d2686f2c283d54b7574fcfba9727306328942a/0 ip=::::vm-kbuild-yocto-x86_64-62::dhcp earlyprintk=ttyS0,115200 debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 panic=-1 softlockup_panic=1 nmi_watchdog=panic oops=panic load_ramdisk=2 prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal rw drbd.minor_count=8
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] Centaur CentaurHauls
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000013ffdfff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000013ffe000-0x0000000013ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[ 0.000000] bootconsole [earlyser0] enabled
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.4 present.
[ 0.000000] DMI: Bochs Bochs, BIOS Bochs 01/01/2011
[ 0.000000] Hypervisor detected: KVM
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x13ffe max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: write-back
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0080000000 mask FF80000000 uncachable
[ 0.000000] 1 disabled
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x70406, new 0x7010600070106
[ 0.000000] Scan for SMP in [mem 0x00000000-0x000003ff]
[ 0.000000] Scan for SMP in [mem 0x0009fc00-0x0009ffff]
[ 0.000000] Scan for SMP in [mem 0x000f0000-0x000fffff]
[ 0.000000] found SMP MP-table at [mem 0x000fdaf0-0x000fdaff] mapped at [ffff8800000fdaf0]
[ 0.000000] mpc: fdb00-fdbe8
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x035b8000, 0x035b8fff] PGTABLE
[ 0.000000] BRK [0x035b9000, 0x035b9fff] PGTABLE
[ 0.000000] BRK [0x035ba000, 0x035bafff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x13a00000-0x13bfffff]
[ 0.000000] [mem 0x13a00000-0x13bfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x10000000-0x139fffff]
[ 0.000000] [mem 0x10000000-0x139fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x0fffffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x0fffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x13c00000-0x13ffdfff]
[ 0.000000] [mem 0x13c00000-0x13dfffff] page 2M
[ 0.000000] [mem 0x13e00000-0x13ffdfff] page 4k
[ 0.000000] BRK [0x035bb000, 0x035bbfff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x13c44000-0x13feffff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000FD990 000014 (v00 BOCHS )
[ 0.000000] ACPI: RSDT 0x0000000013FFE4B0 000034 (v01 BOCHS BXPCRSDT 00000001 BXPC 00000001)
[ 0.000000] ACPI: FACP 0x0000000013FFFF80 000074 (v01 BOCHS BXPCFACP 00000001 BXPC 00000001)
[ 0.000000] ACPI: DSDT 0x0000000013FFE4F0 0011A9 (v01 BXPC BXDSDT 00000001 INTL 20100528)
[ 0.000000] ACPI: FACS 0x0000000013FFFF40 000040
[ 0.000000] ACPI: SSDT 0x0000000013FFF800 000735 (v01 BOCHS BXPCSSDT 00000001 BXPC 00000001)
[ 0.000000] ACPI: APIC 0x0000000013FFF6E0 000078 (v01 BOCHS BXPCAPIC 00000001 BXPC 00000001)
[ 0.000000] ACPI: HPET 0x0000000013FFF6A0 000038 (v01 BOCHS BXPCHPET 00000001 BXPC 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] mapped APIC to ffffffffff5fc000 ( fee00000)
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x0000000013ffdfff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x13ff9000-0x13ffdfff]
[ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
[ 0.000000] kvm-clock: cpu 0, msr 0:13ff8001, primary cpu clock
[ 0.000000] [ffffea0000000000-ffffea00005fffff] PMD -> [ffff880012e00000-ffff8800133fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
[ 0.000000] node 0: [mem 0x00100000-0x13ffdfff]
[ 0.000000] Initmem setup node 0 [mem 0x00001000-0x13ffdfff]
[ 0.000000] On node 0 totalpages: 81820
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 1216 pages used for memmap
[ 0.000000] DMA32 zone: 77822 pages, LIFO batch:15
[ 0.000000] ACPI: PM-Timer IO Port: 0xb008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] mapped APIC to ffffffffff5fc000 ( fee00000)
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 00, APIC ID 0, APIC INT 02
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 05, APIC ID 0, APIC INT 05
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 09, APIC ID 0, APIC INT 09
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0a, APIC ID 0, APIC INT 0a
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0b, APIC ID 0, APIC INT 0b
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 01, APIC ID 0, APIC INT 01
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 03, APIC ID 0, APIC INT 03
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 04, APIC ID 0, APIC INT 04
[ 0.000000] ACPI: IRQ5 used by override.
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 06, APIC ID 0, APIC INT 06
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 07, APIC ID 0, APIC INT 07
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 08, APIC ID 0, APIC INT 08
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: IRQ10 used by override.
[ 0.000000] ACPI: IRQ11 used by override.
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0c, APIC ID 0, APIC INT 0c
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0d, APIC ID 0, APIC INT 0d
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0e, APIC ID 0, APIC INT 0e
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0f, APIC ID 0, APIC INT 0f
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] mapped IOAPIC to ffffffffff5fb000 (fec00000)
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[ 0.000000] e820: [mem 0x14000000-0xfeffbfff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on KVM
[ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:1 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 479 pages/cpu @ffff880013800000 s1922560 r8192 d31232 u2097152
[ 0.000000] pcpu-alloc: s1922560 r8192 d31232 u2097152 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] KVM setup async PF for cpu 0
[ 0.000000] kvm-stealtime: cpu 0, msr 1380d340
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 80519
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: user=lkp job=/lkp/scheduled/vm-kbuild-yocto-x86_64-62/rand_boot-performance-1-yocto-minimal-x86_64.cgz-x86_64-nfsroot-84d2686f2c283d54b7574fcfba9727306328942a-0.yaml ARCH=x86_64 BOOT_IMAGE=/kernel/x86_64-nfsroot/84d2686f2c283d54b7574fcfba9727306328942a/vmlinuz-3.18.0-rc1-g84d2686 kconfig=x86_64-nfsroot commit=84d2686f2c283d54b7574fcfba9727306328942a branch=linux-devel/devel-xian-x86_64-201410240123 root=/dev/ram0 max_uptime=3600 RESULT_ROOT=/result/vm-kbuild-yocto-x86_64/boot/performance-1/yocto-minimal-x86_64.cgz/x86_64-nfsroot/84d2686f2c283d54b7574fcfba9727306328942a/0 ip=::::vm-kbuild-yocto-x86_64-62::dhcp earlyprintk=ttyS0,115200 debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 panic=-1 softlockup_panic=1 nmi_watchdog=panic oops=panic load_ramdisk=2 prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal rw drbd.minor_count=8
[ 0.000000] sysrq: sysrq always enabled.
[ 0.000000] PID hash table entries: 2048 (order: 2, 16384 bytes)
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 using standard form
[ 0.000000] Memory: 275956K/327280K available (11716K kernel code, 1580K rwdata, 5952K rodata, 3384K init, 15920K bss, 51324K reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
[ 0.000000] NR_IRQS:4352 nr_irqs:256 0
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] bootconsole [earlyser0] disabled
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.18.0-rc1-g84d2686 (kbuild@xian) (gcc version 4.9.1 (Debian 4.9.1-11) ) #159 SMP Fri Oct 24 01:28:28 CST 2014
[ 0.000000] Command line: user=lkp job=/lkp/scheduled/vm-kbuild-yocto-x86_64-62/rand_boot-performance-1-yocto-minimal-x86_64.cgz-x86_64-nfsroot-84d2686f2c283d54b7574fcfba9727306328942a-0.yaml ARCH=x86_64 BOOT_IMAGE=/kernel/x86_64-nfsroot/84d2686f2c283d54b7574fcfba9727306328942a/vmlinuz-3.18.0-rc1-g84d2686 kconfig=x86_64-nfsroot commit=84d2686f2c283d54b7574fcfba9727306328942a branch=linux-devel/devel-xian-x86_64-201410240123 root=/dev/ram0 max_uptime=3600 RESULT_ROOT=/result/vm-kbuild-yocto-x86_64/boot/performance-1/yocto-minimal-x86_64.cgz/x86_64-nfsroot/84d2686f2c283d54b7574fcfba9727306328942a/0 ip=::::vm-kbuild-yocto-x86_64-62::dhcp earlyprintk=ttyS0,115200 debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 panic=-1 softlockup_panic=1 nmi_watchdog=panic oops=panic load_ramdisk=2 prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal rw drbd.minor_count=8
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] Centaur CentaurHauls
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000013ffdfff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000013ffe000-0x0000000013ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[ 0.000000] bootconsole [earlyser0] enabled
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.4 present.
[ 0.000000] DMI: Bochs Bochs, BIOS Bochs 01/01/2011
[ 0.000000] Hypervisor detected: KVM
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x13ffe max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: write-back
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0080000000 mask FF80000000 uncachable
[ 0.000000] 1 disabled
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x70406, new 0x7010600070106
[ 0.000000] Scan for SMP in [mem 0x00000000-0x000003ff]
[ 0.000000] Scan for SMP in [mem 0x0009fc00-0x0009ffff]
[ 0.000000] Scan for SMP in [mem 0x000f0000-0x000fffff]
[ 0.000000] found SMP MP-table at [mem 0x000fdaf0-0x000fdaff] mapped at [ffff8800000fdaf0]
[ 0.000000] mpc: fdb00-fdbe8
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x035b8000, 0x035b8fff] PGTABLE
[ 0.000000] BRK [0x035b9000, 0x035b9fff] PGTABLE
[ 0.000000] BRK [0x035ba000, 0x035bafff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x13a00000-0x13bfffff]
[ 0.000000] [mem 0x13a00000-0x13bfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x10000000-0x139fffff]
[ 0.000000] [mem 0x10000000-0x139fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x0fffffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x0fffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x13c00000-0x13ffdfff]
[ 0.000000] [mem 0x13c00000-0x13dfffff] page 2M
[ 0.000000] [mem 0x13e00000-0x13ffdfff] page 4k
[ 0.000000] BRK [0x035bb000, 0x035bbfff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x13c44000-0x13feffff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000FD990 000014 (v00 BOCHS )
[ 0.000000] ACPI: RSDT 0x0000000013FFE4B0 000034 (v01 BOCHS BXPCRSDT 00000001 BXPC 00000001)
[ 0.000000] ACPI: FACP 0x0000000013FFFF80 000074 (v01 BOCHS BXPCFACP 00000001 BXPC 00000001)
[ 0.000000] ACPI: DSDT 0x0000000013FFE4F0 0011A9 (v01 BXPC BXDSDT 00000001 INTL 20100528)
[ 0.000000] ACPI: FACS 0x0000000013FFFF40 000040
[ 0.000000] ACPI: SSDT 0x0000000013FFF800 000735 (v01 BOCHS BXPCSSDT 00000001 BXPC 00000001)
[ 0.000000] ACPI: APIC 0x0000000013FFF6E0 000078 (v01 BOCHS BXPCAPIC 00000001 BXPC 00000001)
[ 0.000000] ACPI: HPET 0x0000000013FFF6A0 000038 (v01 BOCHS BXPCHPET 00000001 BXPC 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] mapped APIC to ffffffffff5fc000 ( fee00000)
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x0000000013ffdfff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x13ff9000-0x13ffdfff]
[ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
[ 0.000000] kvm-clock: cpu 0, msr 0:13ff8001, primary cpu clock
[ 0.000000] [ffffea0000000000-ffffea00005fffff] PMD -> [ffff880012e00000-ffff8800133fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
[ 0.000000] node 0: [mem 0x00100000-0x13ffdfff]
[ 0.000000] Initmem setup node 0 [mem 0x00001000-0x13ffdfff]
[ 0.000000] On node 0 totalpages: 81820
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 1216 pages used for memmap
[ 0.000000] DMA32 zone: 77822 pages, LIFO batch:15
[ 0.000000] ACPI: PM-Timer IO Port: 0xb008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] mapped APIC to ffffffffff5fc000 ( fee00000)
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 00, APIC ID 0, APIC INT 02
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 05, APIC ID 0, APIC INT 05
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 09, APIC ID 0, APIC INT 09
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0a, APIC ID 0, APIC INT 0a
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0b, APIC ID 0, APIC INT 0b
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 01, APIC ID 0, APIC INT 01
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 03, APIC ID 0, APIC INT 03
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 04, APIC ID 0, APIC INT 04
[ 0.000000] ACPI: IRQ5 used by override.
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 06, APIC ID 0, APIC INT 06
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 07, APIC ID 0, APIC INT 07
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 08, APIC ID 0, APIC INT 08
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: IRQ10 used by override.
[ 0.000000] ACPI: IRQ11 used by override.
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0c, APIC ID 0, APIC INT 0c
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0d, APIC ID 0, APIC INT 0d
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0e, APIC ID 0, APIC INT 0e
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0f, APIC ID 0, APIC INT 0f
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] mapped IOAPIC to ffffffffff5fb000 (fec00000)
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[ 0.000000] e820: [mem 0x14000000-0xfeffbfff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on KVM
[ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:1 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 479 pages/cpu @ffff880013800000 s1922560 r8192 d31232 u2097152
[ 0.000000] pcpu-alloc: s1922560 r8192 d31232 u2097152 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] KVM setup async PF for cpu 0
[ 0.000000] kvm-stealtime: cpu 0, msr 1380d340
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 80519
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: user=lkp job=/lkp/scheduled/vm-kbuild-yocto-x86_64-62/rand_boot-performance-1-yocto-minimal-x86_64.cgz-x86_64-nfsroot-84d2686f2c283d54b7574fcfba9727306328942a-0.yaml ARCH=x86_64 BOOT_IMAGE=/kernel/x86_64-nfsroot/84d2686f2c283d54b7574fcfba9727306328942a/vmlinuz-3.18.0-rc1-g84d2686 kconfig=x86_64-nfsroot commit=84d2686f2c283d54b7574fcfba9727306328942a branch=linux-devel/devel-xian-x86_64-201410240123 root=/dev/ram0 max_uptime=3600 RESULT_ROOT=/result/vm-kbuild-yocto-x86_64/boot/performance-1/yocto-minimal-x86_64.cgz/x86_64-nfsroot/84d2686f2c283d54b7574fcfba9727306328942a/0 ip=::::vm-kbuild-yocto-x86_64-62::dhcp earlyprintk=ttyS0,115200 debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 panic=-1 softlockup_panic=1 nmi_watchdog=panic oops=panic load_ramdisk=2 prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal rw drbd.minor_count=8
[ 0.000000] sysrq: sysrq always enabled.
[ 0.000000] PID hash table entries: 2048 (order: 2, 16384 bytes)
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 using standard form
[ 0.000000] Memory: 275956K/327280K available (11716K kernel code, 1580K rwdata, 5952K rodata, 3384K init, 15920K bss, 51324K reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
[ 0.000000] NR_IRQS:4352 nr_irqs:256 0
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] bootconsole [earlyser0] disabled
[ 0.000000] console [ttyS0] enabled
[ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
[ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8
[ 0.000000] ... MAX_LOCK_DEPTH: 48
[ 0.000000] ... MAX_LOCKDEP_KEYS: 8191
[ 0.000000] ... CLASSHASH_SIZE: 4096
[ 0.000000] ... MAX_LOCKDEP_ENTRIES: 32768
[ 0.000000] ... MAX_LOCKDEP_CHAINS: 65536
[ 0.000000] ... CHAINHASH_SIZE: 32768
[ 0.000000] memory used by lock dependency info: 8671 kB
[ 0.000000] per task-struct memory footprint: 2688 bytes
[ 0.000000] ------------------------
[ 0.000000] | Locking API testsuite:
[ 0.000000] ----------------------------------------------------------------------------
[ 0.000000] | spin |wlock |rlock |mutex | wsem | rsem |
[ 0.000000] --------------------------------------------------------------------------
[ 0.000000] A-A deadlock: ok | ok | ok | ok | ok | ok |
[ 0.000000] A-B-B-A deadlock: ok | ok | ok | ok | ok | ok |
[ 0.000000] A-B-B-C-C-A deadlock: ok | ok | ok | ok | ok | ok |
[ 0.000000] A-B-C-A-B-C deadlock: ok | ok | ok | ok | ok | ok |
[ 0.000000] A-B-B-C-C-D-D-A deadlock: ok | ok | ok | ok | ok | ok |
[ 0.000000] A-B-C-D-B-D-D-A deadlock: ok | ok | ok | ok | ok | ok |
[ 0.000000] A-B-C-D-B-C-D-A deadlock: ok | ok | ok | ok | ok | ok |
[ 0.000000] double unlock: ok | ok | ok | ok | ok | ok |
[ 0.000000] initialize held: ok | ok | ok | ok | ok | ok |
[ 0.000000] bad unlock order: ok | ok | ok | ok | ok | ok |
[ 0.000000] --------------------------------------------------------------------------
[ 0.000000] recursive read-lock: | ok | | ok |
[ 0.000000] recursive read-lock #2: | ok | | ok |
[ 0.000000] mixed read-write-lock: | ok | | ok |
[ 0.000000] mixed write-read-lock: | ok | | ok |
[ 0.000000] --------------------------------------------------------------------------
[ 0.000000] hard-irqs-on + irq-safe-A/12: ok | ok | ok |
[ 0.000000] soft-irqs-on + irq-safe-A/12: ok | ok | ok |
[ 0.000000] hard-irqs-on + irq-safe-A/21: ok | ok | ok |
[ 0.000000] soft-irqs-on + irq-safe-A/21: ok | ok | ok |
[ 0.000000] sirq-safe-A => hirqs-on/12: ok | ok | ok |
[ 0.000000] sirq-safe-A => hirqs-on/21: ok | ok | ok |
[ 0.000000] hard-safe-A + irqs-on/12: ok | ok | ok |
[ 0.000000] soft-safe-A + irqs-on/12: ok | ok | ok |
[ 0.000000] hard-safe-A + irqs-on/21: ok | ok | ok |
[ 0.000000] soft-safe-A + irqs-on/21: ok | ok | ok |
[ 0.000000] hard-safe-A + unsafe-B #1/123: ok | ok | ok |
[ 0.000000] soft-safe-A + unsafe-B #1/123: ok | ok | ok |
[ 0.000000] hard-safe-A + unsafe-B #1/132: ok | ok | ok |
[ 0.000000] soft-safe-A + unsafe-B #1/132: ok | ok | ok |
[ 0.000000] hard-safe-A + unsafe-B #1/213: ok | ok | ok |
[ 0.000000] soft-safe-A + unsafe-B #1/213: ok | ok | ok |
[ 0.000000] hard-safe-A + unsafe-B #1/231: ok | ok | ok |
[ 0.000000] soft-safe-A + unsafe-B #1/231: ok | ok | ok |
[ 0.000000] hard-safe-A + unsafe-B #1/312: ok | ok | ok |
[ 0.000000] soft-safe-A + unsafe-B #1/312: ok | ok | ok |
[ 0.000000] hard-safe-A + unsafe-B #1/321: ok | ok | ok |
[ 0.000000] soft-safe-A + unsafe-B #1/321: ok | ok | ok |
[ 0.000000] hard-safe-A + unsafe-B #2/123: ok | ok | ok |
[ 0.000000] soft-safe-A + unsafe-B #2/123: ok | ok | ok |
[ 0.000000] hard-safe-A + unsafe-B #2/132: ok | ok | ok |
[ 0.000000] soft-safe-A + unsafe-B #2/132: ok | ok | ok |
[ 0.000000] hard-safe-A + unsafe-B #2/213: ok | ok | ok |
[ 0.000000] soft-safe-A + unsafe-B #2/213: ok | ok | ok |
[ 0.000000] hard-safe-A + unsafe-B #2/231: ok | ok | ok |
[ 0.000000] soft-safe-A + unsafe-B #2/231: ok | ok | ok |
[ 0.000000] hard-safe-A + unsafe-B #2/312: ok | ok | ok |
[ 0.000000] soft-safe-A + unsafe-B #2/312: ok | ok | ok |
[ 0.000000] hard-safe-A + unsafe-B #2/321: ok | ok | ok |
[ 0.000000] soft-safe-A + unsafe-B #2/321: ok | ok | ok |
[ 0.000000] hard-irq lock-inversion/123: ok | ok | ok |
[ 0.000000] soft-irq lock-inversion/123: ok | ok | ok |
[ 0.000000] hard-irq lock-inversion/132: ok | ok | ok |
[ 0.000000] soft-irq lock-inversion/132: ok | ok | ok |
[ 0.000000] hard-irq lock-inversion/213: ok | ok | ok |
[ 0.000000] soft-irq lock-inversion/213: ok | ok | ok |
[ 0.000000] hard-irq lock-inversion/231: ok | ok | ok |
[ 0.000000] soft-irq lock-inversion/231: ok | ok | ok |
[ 0.000000] hard-irq lock-inversion/312: ok | ok | ok |
[ 0.000000] soft-irq lock-inversion/312: ok | ok | ok |
[ 0.000000] hard-irq lock-inversion/321: ok | ok | ok |
[ 0.000000] soft-irq lock-inversion/321: ok | ok | ok |
[ 0.000000] hard-irq read-recursion/123: ok |
[ 0.000000] soft-irq read-recursion/123: ok |
[ 0.000000] hard-irq read-recursion/132: ok |
[ 0.000000] soft-irq read-recursion/132: ok |
[ 0.000000] hard-irq read-recursion/213: ok |
[ 0.000000] soft-irq read-recursion/213: ok |
[ 0.000000] hard-irq read-recursion/231: ok |
[ 0.000000] soft-irq read-recursion/231: ok |
[ 0.000000] hard-irq read-recursion/312: ok |
[ 0.000000] soft-irq read-recursion/312: ok |
[ 0.000000] hard-irq read-recursion/321: ok |
[ 0.000000] soft-irq read-recursion/321: ok |
[ 0.000000] --------------------------------------------------------------------------
[ 0.000000] | Wound/wait tests |
[ 0.000000] ---------------------
[ 0.000000] ww api failures: ok | ok | ok |
[ 0.000000] ww contexts mixing: ok | ok |
[ 0.000000] finishing ww context: ok | ok | ok | ok |
[ 0.000000] locking mismatches: ok | ok | ok |
[ 0.000000] EDEADLK handling: ok | ok | ok | ok | ok | ok | ok | ok | ok | ok |
[ 0.000000] spinlock nest unlocked: ok |
[ 0.000000] -----------------------------------------------------
[ 0.000000] |block | try |context|
[ 0.000000] -----------------------------------------------------
[ 0.000000] context: ok | ok | ok |
[ 0.000000] try: ok | ok | ok |
[ 0.000000] block: ok | ok | ok |
[ 0.000000] spinlock: ok | ok | ok |
[ 0.000000] -------------------------------------------------------
[ 0.000000] Good, all 253 testcases passed! |
[ 0.000000] ---------------------------------
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Detected 2693.452 MHz processor
[ 0.003000] Calibrating delay loop (skipped) preset value.. 5386.90 BogoMIPS (lpj=2693452)
[ 0.005009] pid_max: default: 32768 minimum: 301
[ 0.007107] ACPI: Core revision 20140828
[ 0.097055] ACPI: All ACPI Tables successfully acquired
[ 0.099574] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.101379] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.103021] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes)
[ 0.105071] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes)
[ 0.110120] Initializing cgroup subsys devices
[ 0.111137] Initializing cgroup subsys freezer
[ 0.112054] Initializing cgroup subsys blkio
[ 0.113043] Initializing cgroup subsys debug
[ 0.114334] mce: CPU supports 10 MCE banks
[ 0.115070] numa_add_cpu cpu 0 node 0: mask now 0
[ 0.116026] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[ 0.116026] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[ 0.164689] Freeing SMP alternatives memory: 44K (ffffffff8261f000 - ffffffff8262a000)
[ 0.173035] ftrace: allocating 46663 entries in 183 pages
[ 0.194218] Getting VERSION: 1050014
[ 0.195027] Getting VERSION: 1050014
[ 0.196025] Getting ID: 0
[ 0.197026] Getting ID: ff000000
[ 0.198030] Getting LVT0: 8700
[ 0.199015] Getting LVT1: 8400
[ 0.200100] enabled ExtINT on CPU#0
[ 0.203263] ENABLING IO-APIC IRQs
[ 0.204070] init IO_APIC IRQs
[ 0.205013] apic 0 pin 0 not connected
[ 0.206289] IOAPIC[0]: Set routing entry (0-1 -> 0x31 -> IRQ 1 Mode:0 Active:0 Dest:1)
[ 0.208079] IOAPIC[0]: Set routing entry (0-2 -> 0x30 -> IRQ 0 Mode:0 Active:0 Dest:1)
[ 0.209058] IOAPIC[0]: Set routing entry (0-2 -> 0x30 -> IRQ 0 Mode:0 Active:0 Dest:1)
[ 0.210078] IOAPIC[0]: Set routing entry (0-3 -> 0x33 -> IRQ 3 Mode:0 Active:0 Dest:1)
[ 0.211076] IOAPIC[0]: Set routing entry (0-4 -> 0x34 -> IRQ 4 Mode:0 Active:0 Dest:1)
[ 0.212082] IOAPIC[0]: Set routing entry (0-5 -> 0x35 -> IRQ 5 Mode:1 Active:0 Dest:1)
[ 0.213090] IOAPIC[0]: Set routing entry (0-6 -> 0x36 -> IRQ 6 Mode:0 Active:0 Dest:1)
[ 0.214083] IOAPIC[0]: Set routing entry (0-7 -> 0x37 -> IRQ 7 Mode:0 Active:0 Dest:1)
[ 0.216036] IOAPIC[0]: Set routing entry (0-8 -> 0x38 -> IRQ 8 Mode:0 Active:0 Dest:1)
[ 0.217087] IOAPIC[0]: Set routing entry (0-9 -> 0x39 -> IRQ 9 Mode:1 Active:0 Dest:1)
[ 0.218077] IOAPIC[0]: Set routing entry (0-10 -> 0x3a -> IRQ 10 Mode:1 Active:0 Dest:1)
[ 0.219000] IOAPIC[0]: Set routing entry (0-11 -> 0x3b -> IRQ 11 Mode:1 Active:0 Dest:1)
[ 0.219090] IOAPIC[0]: Set routing entry (0-12 -> 0x3c -> IRQ 12 Mode:0 Active:0 Dest:1)
[ 0.220072] IOAPIC[0]: Set routing entry (0-13 -> 0x3d -> IRQ 13 Mode:0 Active:0 Dest:1)
[ 0.221078] IOAPIC[0]: Set routing entry (0-14 -> 0x3e -> IRQ 14 Mode:0 Active:0 Dest:1)
[ 0.222062] IOAPIC[0]: Set routing entry (0-15 -> 0x3f -> IRQ 15 Mode:0 Active:0 Dest:1)
[ 0.223041] apic 0 pin 16 not connected
[ 0.224010] apic 0 pin 17 not connected
[ 0.225010] apic 0 pin 18 not connected
[ 0.226009] apic 0 pin 19 not connected
[ 0.227013] apic 0 pin 20 not connected
[ 0.229008] apic 0 pin 21 not connected
[ 0.231009] apic 0 pin 22 not connected
[ 0.232007] apic 0 pin 23 not connected
[ 0.234000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.234014] smpboot: CPU0: Intel Xeon E312xx (Sandy Bridge) (fam: 06, model: 2a, stepping: 01)
[ 0.237051] TSC deadline timer enabled
[ 0.238000] Performance Events: unsupported p6 CPU model 42 no PMU driver, software events only.
[ 0.243453] x86: Booted up 1 node, 1 CPUs
[ 0.244032] ----------------
[ 0.245006] | NMI testsuite:
[ 0.246007] --------------------
[ 0.247014] remote IPI: ok |
[ 0.248008] local IPI: ok |
[ 0.249917] --------------------
[ 0.250013] Good, all 2 testcases passed! |
[ 0.251007] ---------------------------------
[ 0.252015] smpboot: Total of 1 processors activated (5386.90 BogoMIPS)
[ 0.256094] devtmpfs: initialized
[ 0.275763] kworker/u2:0 (13) used greatest stack depth: 13408 bytes left
[ 0.286135] xor: automatically using best checksumming function:
[ 0.297031] avx : 88.000 MB/sec
[ 0.298096] atomic64_test: passed for x86-64 platform with CX8 and with SSE
[ 0.299598] RTC time: 1:28:06, date: 10/24/14
[ 0.301093] NET: Registered protocol family 16
[ 0.305572] kworker/u2:0 (17) used greatest stack depth: 13024 bytes left
[ 0.308221] cpuidle: using governor ladder
[ 0.309326] cpuidle: using governor menu
[ 0.312531] ACPI: bus type PCI registered
[ 0.315110] dca service started, version 1.12.1
[ 0.316360] PCI: Using configuration type 1 for base access
[ 0.517014] raid6: sse2x1 4531 MB/s
[ 0.535013] raid6: sse2x2 5761 MB/s
[ 0.553017] raid6: sse2x4 6613 MB/s
[ 0.554008] raid6: using algorithm sse2x4 (6613 MB/s)
[ 0.555007] raid6: using ssse3x2 recovery algorithm
[ 0.567753] ACPI: Added _OSI(Module Device)
[ 0.568017] ACPI: Added _OSI(Processor Device)
[ 0.569011] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.570010] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.577660] IOAPIC[0]: Set routing entry (0-9 -> 0x39 -> IRQ 9 Mode:1 Active:0 Dest:1)
[ 0.662318] ACPI: Interpreter enabled
[ 0.663622] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140828/hwxface-580)
[ 0.666274] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140828/hwxface-580)
[ 0.669627] ACPI: (supports S0 S3 S4 S5)
[ 0.670170] ACPI: Using IOAPIC for interrupt routing
[ 0.671662] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.811852] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.812057] acpi PNP0A03:00: _OSC: OS supports [Segments MSI]
[ 0.813608] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.821414] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
[ 0.838504] PCI host bridge to bus 0000:00
[ 0.839026] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.840563] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.841204] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.842035] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.843494] pci_bus 0000:00: root bus resource [mem 0x80000000-0xfebfffff]
[ 0.844278] pci 0000:00:00.0: [8086:1237] type 00 class 0x060000
[ 0.849626] pci 0000:00:01.0: [8086:7000] type 00 class 0x060100
[ 0.857028] pci 0000:00:01.1: [8086:7010] type 00 class 0x010180
[ 0.861372] pci 0000:00:01.1: reg 0x20: [io 0xc080-0xc08f]
[ 0.863045] pci 0000:00:01.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
[ 0.864008] pci 0000:00:01.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
[ 0.865008] pci 0000:00:01.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
[ 0.866009] pci 0000:00:01.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
[ 0.871175] pci 0000:00:01.3: [8086:7113] type 00 class 0x068000
[ 0.872624] pci 0000:00:01.3: quirk: [io 0xb000-0xb03f] claimed by PIIX4 ACPI
[ 0.873025] pci 0000:00:01.3: quirk: [io 0xb100-0xb10f] claimed by PIIX4 SMB
[ 0.879521] pci 0000:00:02.0: [1013:00b8] type 00 class 0x030000
[ 0.881833] pci 0000:00:02.0: reg 0x10: [mem 0xfc000000-0xfdffffff pref]
[ 0.883735] pci 0000:00:02.0: reg 0x14: [mem 0xfebf0000-0xfebf0fff]
[ 0.889806] pci 0000:00:02.0: reg 0x30: [mem 0xfebe0000-0xfebeffff pref]
[ 0.895573] pci 0000:00:03.0: [8086:100e] type 00 class 0x020000
[ 0.897010] pci 0000:00:03.0: reg 0x10: [mem 0xfeba0000-0xfebbffff]
[ 0.899020] pci 0000:00:03.0: reg 0x14: [io 0xc000-0xc03f]
[ 0.905011] pci 0000:00:03.0: reg 0x30: [mem 0xfebc0000-0xfebdffff pref]
[ 0.912997] pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000
[ 0.914629] pci 0000:00:04.0: reg 0x10: [io 0xc040-0xc07f]
[ 0.916011] pci 0000:00:04.0: reg 0x14: [mem 0xfebf1000-0xfebf1fff]
[ 0.926792] pci 0000:00:05.0: [8086:25ab] type 00 class 0x088000
[ 0.928016] pci 0000:00:05.0: reg 0x10: [mem 0xfebf2000-0xfebf200f]
[ 0.951274] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11)
[ 0.957457] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
[ 0.961950] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
[ 0.966930] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11)
[ 0.968895] ACPI: PCI Interrupt Link [LNKS] (IRQs *9)
[ 0.975871] ACPI: Enabled 16 GPEs in block 00 to 0F
[ 0.979477] vgaarb: setting as boot device: PCI:0000:00:02.0
[ 0.980000] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.980221] vgaarb: loaded
[ 0.981007] vgaarb: bridge control possible 0000:00:02.0
[ 0.985717] SCSI subsystem initialized
[ 0.986840] libata version 3.00 loaded.
[ 0.987726] ACPI: bus type USB registered
[ 0.988704] usbcore: registered new interface driver usbfs
[ 0.990519] usbcore: registered new interface driver hub
[ 0.991463] usbcore: registered new device driver usb
[ 0.992808] pps_core: LinuxPPS API ver. 1 registered
[ 0.993007] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@xxxxxxxx>
[ 0.994419] PTP clock support registered
[ 0.996820] wmi: Mapper loaded
[ 0.997531] Advanced Linux Sound Architecture Driver Initialized.
[ 0.998120] PCI: Using ACPI for IRQ routing
[ 0.999013] PCI: pci_cache_line_size set to 64 bytes
[ 1.000216] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[ 1.001041] e820: reserve RAM buffer [mem 0x13ffe000-0x13ffffff]
[ 1.008409] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 1.009125] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 1.011850] hpet0: 3 comparators, 64-bit 100.000000 MHz counter
[ 1.015266] Switched to clocksource kvm-clock
[ 1.747863] pnp: PnP ACPI init
[ 1.749762] IOAPIC[0]: Set routing entry (0-8 -> 0x38 -> IRQ 8 Mode:0 Active:0 Dest:1)
[ 1.753285] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 1.765922] IOAPIC[0]: Set routing entry (0-1 -> 0x31 -> IRQ 1 Mode:0 Active:0 Dest:1)
[ 1.769365] pnp 00:01: Plug and Play ACPI device, IDs PNP0303 (active)
[ 1.771560] IOAPIC[0]: Set routing entry (0-12 -> 0x3c -> IRQ 12 Mode:0 Active:0 Dest:1)
[ 1.785284] pnp 00:02: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 1.787846] IOAPIC[0]: Set routing entry (0-6 -> 0x36 -> IRQ 6 Mode:0 Active:0 Dest:1)
[ 1.790630] pnp 00:03: [dma 2]
[ 1.792624] pnp 00:03: Plug and Play ACPI device, IDs PNP0700 (active)
[ 1.805558] IOAPIC[0]: Set routing entry (0-7 -> 0x37 -> IRQ 7 Mode:0 Active:0 Dest:1)
[ 1.808892] pnp 00:04: Plug and Play ACPI device, IDs PNP0400 (active)
[ 1.811775] IOAPIC[0]: Set routing entry (0-4 -> 0x34 -> IRQ 4 Mode:0 Active:0 Dest:1)
[ 1.825517] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
[ 1.828270] IOAPIC[0]: Set routing entry (0-3 -> 0x33 -> IRQ 3 Mode:0 Active:0 Dest:1)
[ 1.831812] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
[ 1.849741] pnp: PnP ACPI: found 7 devices
[ 1.993354] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 2.005104] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 2.006667] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 2.008431] pci_bus 0000:00: resource 7 [mem 0x80000000-0xfebfffff]
[ 2.012310] NET: Registered protocol family 2
[ 2.027955] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
[ 2.033053] TCP bind hash table entries: 4096 (order: 6, 327680 bytes)
[ 2.038589] TCP: Hash tables configured (established 4096 bind 4096)
[ 2.044970] TCP: reno registered
[ 2.049589] UDP hash table entries: 256 (order: 3, 49152 bytes)
[ 2.055744] UDP-Lite hash table entries: 256 (order: 3, 49152 bytes)
[ 2.062425] NET: Registered protocol family 1
[ 2.072295] RPC: Registered named UNIX socket transport module.
[ 2.083609] RPC: Registered udp transport module.
[ 2.085192] RPC: Registered tcp transport module.
[ 2.086695] RPC: Registered tcp NFSv4.1 backchannel transport module_______________________________________________
LKP mailing list
LKP@xxxxxxxxxxxxxxx