Re: [PATCH] i386/audit: stop scribbling on the stack frame

[Eric Paris]

My patch was already committed to the -tip urgent branch.  I believe any
optimization should be based on that branch, Richard.  If you are trying
to wrangle every bit of speed out of this, should you

push %esi;
push %edi;
CFI_ADJUST_CFA_OFFSET 8
call __audit_syscall_entry
pop;
pop;
CFI_ADJUST_CFA_OFFSET -8

Instead of using the pushl_cfi and popl_cfi macros?

I wrote my patch to be obviously correct, but agree there are certainly
some speedups possible.

-Eric

On Sun, 2014-10-26 at 22:34 -0400, Richard Guy Briggs wrote:
> git commit b4f0d3755c5e9cc86292d5fd78261903b4f23d4a was very very dumb.
> It was writing over %esp/pt_regs semi-randomly on i686 with the expected
> "system can't boot" results.  As noted in:
> 
> https://bugs.freedesktop.org/show_bug.cgi?id=85277
> 
> This patch stops fscking with pt_regs.  Instead it sets up the registers
> for the call to __audit_syscall_entry in the most obvious conceivable
> way.  It then does just a tiny tiny touch of magic.  We need to get what
> started in PT_EDX into 0(%esp) and PT_ESI into 4(%esp).  This is as easy
> as a pair of pushes using the values still in those registers.
> 
> After the call to __audit_syscall_entry all we need to do is get that
> now useless junk off the stack (pair of pops) and reload %eax with the
> original syscall so other stuff can keep going about it's business.
> 
> Reported-by: Paulo Zanoni <przanoni@xxxxxxxxx>
> Signed-off-by: Eric Paris <eparis@xxxxxxxxxx>
> Signed-off-by: Richard Guy Briggs <rgb@xxxxxxxxxx>
> Cc: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
> Cc: Ingo Molnar <mingo@xxxxxxxxxx>
> Cc: "H. Peter Anvin" <hpa@xxxxxxxxx>
> Cc: x86@xxxxxxxxxx
> Cc: linux-kernel@xxxxxxxxxxxxxxx
> Cc: linux-audit@xxxxxxxxxx
> 
> ---
> On 14/10/25, Thomas Gleixner wrote:
> > Why are we grabbing that from the stack? AFAICT all arguments are in
> > the registers still.
> 
> Right, re-arranging the instructions slightly to avoid overwriting %edx
> with %ebx before needing it to push onto the stack, how does this look?
> 
>  arch/x86/kernel/entry_32.S | 15 +++++++--------
>  1 file changed, 7 insertions(+), 8 deletions(-)
> 
> diff --git a/arch/x86/kernel/entry_32.S b/arch/x86/kernel/entry_32.S
> index b553ed8..344b63f 100644
> --- a/arch/x86/kernel/entry_32.S
> +++ b/arch/x86/kernel/entry_32.S
> @@ -447,15 +447,14 @@ sysenter_exit:
>  sysenter_audit:
>  	testl $(_TIF_WORK_SYSCALL_ENTRY & ~_TIF_SYSCALL_AUDIT),TI_flags(%ebp)
>  	jnz syscall_trace_entry
> -	addl $4,%esp
> -	CFI_ADJUST_CFA_OFFSET -4
> -	movl %esi,4(%esp)		/* 5th arg: 4th syscall arg */
> -	movl %edx,(%esp)		/* 4th arg: 3rd syscall arg */
> -	/* %ecx already in %ecx		   3rd arg: 2nd syscall arg */
> -	movl %ebx,%edx			/* 2nd arg: 1st syscall arg */
> -	/* %eax already in %eax		   1st arg: syscall number */
> +	/* movl PT_ECX(%esp), %ecx	already set, a1: 3nd arg to audit */
> +	/* movl PT_EAX(%esp), %eax	already set, syscall number: 1st arg to audit */
> +	pushl_cfi %esi			/* a3: 5th arg */
> +	pushl_cfi %edx			/* a2: 4th arg */
> +	movl %ebx, %edx			/* ebx/a0: 2nd arg to audit */
>  	call __audit_syscall_entry
> -	pushl_cfi %ebx
> +	popl_cfi %ecx /* get that remapped edx off the stack */
> +	popl_cfi %ecx /* get that remapped esi off the stack */
>  	movl PT_EAX(%esp),%eax		/* reload syscall number */
>  	jmp sysenter_do_call
>  
> 
> - RGB
> 
> --
> Richard Guy Briggs <rbriggs@xxxxxxxxxx>
> Senior Software Engineer, Kernel Security, AMER ENG Base Operating Systems, Red Hat
> Remote, Ottawa, Canada
> Voice: +1.647.777.2635, Internal: (81) 32635, Alt: +1.613.693.0684x3545


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/