Re: [PATCH] mmc: dw_mmc: Change signal voltage error to dev_dbg()

[Ulf Hansson]

On 11 October 2014 06:16, Doug Anderson <dianders@xxxxxxxxxxxx> wrote:
> In (28f92b5 mmc: core: Try other signal levels during power up) we can
> see that there are times when it's valid to try several signal
> voltages.  Don't print an ugly error in the logs when that happens.
>
> Signed-off-by: Doug Anderson <dianders@xxxxxxxxxxxx>

Thanks! Applied for next!

Kind regards
Uffe

> ---
>  drivers/mmc/host/dw_mmc.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c
> index 69f0cc6..c4afbdd 100644
> --- a/drivers/mmc/host/dw_mmc.c
> +++ b/drivers/mmc/host/dw_mmc.c
> @@ -1075,7 +1075,7 @@ static int dw_mci_switch_voltage(struct mmc_host *mmc, struct mmc_ios *ios)
>                 ret = regulator_set_voltage(mmc->supply.vqmmc, min_uv, max_uv);
>
>                 if (ret) {
> -                       dev_err(&mmc->class_dev,
> +                       dev_dbg(&mmc->class_dev,
>                                          "Regulator set error %d: %d - %d\n",
>                                          ret, min_uv, max_uv);
>                         return ret;
> --
> 2.1.0.rc2.206.gedb03e5
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/