[PATCH v2] ARM: dts: exynos4412-trats: Add micro SD card SDHCI node

[Krzysztof Kozlowski]

Add SDHCI node for supporting the micro SD card. On Trats2 board the
SDHCI does not use sd2_cd pins (gpk2-2) for card detect but gpx3-4
instead.

Power is supplied from LDO21 regulator which in off state is controlled
by external GPIO pin.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>

---

Changes since v1:
1. Drop FIXME comment (about findings during testing).
---
 arch/arm/boot/dts/exynos4412-trats2.dts | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/arch/arm/boot/dts/exynos4412-trats2.dts b/arch/arm/boot/dts/exynos4412-trats2.dts
index a5aa52bba72c..7a68e0832cd6 100644
--- a/arch/arm/boot/dts/exynos4412-trats2.dts
+++ b/arch/arm/boot/dts/exynos4412-trats2.dts
@@ -603,6 +603,16 @@
 		cap-mmc-highspeed;
 	};
 
+	sdhci@12530000 {
+		bus-width = <4>;
+		cd-gpios = <&gpx3 4 0>;
+		cd-inverted;
+		pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4>;
+		pinctrl-names = "default";
+		vmmc-supply = <&ldo21_reg>;
+		status = "okay";
+	};
+
 	serial@13800000 {
 		status = "okay";
 	};
-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/