Re: [PATCHv2 0/4] Add Altera peripheral memories to EDAC framework

[Thor Thayer]

On 10/27/2014 03:43 PM, Borislav Petkov wrote:
> On Mon, Oct 27, 2014 at 01:50:24PM -0500, Thor Thayer wrote:
> > Do you have any comments about this driver?
> Just a question: why do you have three .c files for something which
> does only error injection and nothing else AFAICT? Why isn't this part
> of altera_edac.c?
There are 2 files for doing the error injection (altera_l2_edac.c and 
altera_ocram_edac.c) and then 1 file for the irq handling and probe 
(altera_edac_mgr.c).

The L2 cache and the On-Chip RAM drivers were based on the Calxeda L2 
cache driver and when written as 2 separate files, the resulting code 
was very similar from the probe and error handling standpoint so the 
common code was combined (altera_edac_mgr.c).

The Memory Controller model was used for the SDRAM EDAC (altera_edac.c) 
since it matches the DIMM model.  The MC model didn't seem to fit the 
discrete memories like OCRAM and L2 cache (these files) so I used the 
EDAC device model which agreed with the Calxeda L2 cache driver.

Should I move the EDAC Device probe and error handling from 
altera_edac_mgr.c to altera_edac.c? Can I mix the MC and Device models 
in the same file?

Thanks for reviewing and for commenting.

Thor
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/