[PATCH v3 00/19] usb: dwc3: add support for AMD Nolan SoC

From: Huang Rui
Date: Tue Oct 28 2014 - 07:55:59 EST

Next message: Huang Rui: "[PATCH v3 02/19] usb: dwc3: add a flag to check if it is fpga board"
Previous message: Clemens Ladisch: "Re: [PATCH 00/11] Add AXD Audio Processing IP driver"
Next in thread: Huang Rui: "[PATCH v3 02/19] usb: dwc3: add a flag to check if it is fpga board"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

Hi,

The series of patches add AMD Nolan (NL) SoC support for DesignWare USB3
OTG IP with PCI bus glue layer. This controller supported hibernation, LPM
erratum and used the 2.80a IP version and amd own phy. Current
implementation support both simulation and SoC platform. And already tested
with gadget zero and msc tool. It works well on file storage gadget.

These patches are generated on balbi/testing/next

Changes from v2 -> v3
- Confirmed these quirks will be needed in product level
- Move AMD configuration patch to the last one with all quirk flags
- Make all quirks as 1-bit field instead of single-bits on a 32-bit
variable
- Add all quirks DeviceTree counterparts
- Make LPM erratum configurable
- Add PCI ID into pci_ids.h because it will be used both on PCI and DWC3
device driver.

Changes from v1 -> v2
- Remove dual role function temporarily
- Add pci quirk to avoid to bind with xhci driver
- Distinguish between simulation board and soc
- Break down all the special quirks

Patch 1:
- Enable hibernation

Patch 2:
- Distinguish between simulation board and SoC

Patch 3:
- Initialize platform data at pci glue layer

Patch 4 - 16:
- Break down all the special quirks

Patch 17:
- Add PCI device ID of AMD NL USB3 DRD

Patch 18:
- Add PCI quirk to prevent DRD to bind with xHCI driver

Patch 19:
- Add support AMD NL USB3 DRD for dwc3 driver

Patch set already passed all the MSC testing on simulation board with low
clock frequency, so the speed will slower than true SoC. Detailed result
without verbose debug option is below:

root@hr-bak:/home/ray/felipe/usb-tools# ./msc.sh -o /dev/sdb1
Starting test suite: 2014年 10月 28日星期二 19:30:28 CST
test 0a: simple 4k read/write
test 0: sent 3.91 MB read 7.18 MB/s write 6.51 MB/s ... success
test 0b: simple 8k read/write
test 0: sent 7.81 MB read 11.26 MB/s write 10.40 MB/s ... success
test 0c: simple 16k read/write
test 0: sent 15.62 MB read 14.82 MB/s write 12.41 MB/s ... success
test 0d: simple 32k read/write
test 0: sent 31.25 MB read 21.52 MB/s write 17.43 MB/s ... success
test 0e: simple 64k read/write
test 0: sent 62.50 MB read 24.14 MB/s write 19.44 MB/s ... success
test 1: simple 1-sector read/write
test 1: sent 500.00 kB read 1.19 MB/s write 1.03 MB/s ... success
test 2: simple 8-sectors read/write
test 2: sent 3.91 MB read 7.14 MB/s write 6.13 MB/s ... success
test 3: simple 32-sectors read/write
test 3: sent 15.62 MB read 15.49 MB/s write 12.25 MB/s ... success
test 4: simple 64-sectors read/write
test 4: sent 31.25 MB read 19.98 MB/s write 17.44 MB/s ... success
test 5a: scatter/gather for 2-sectors buflen 4k
test 5: sent 1000.00 kB read 2.42 MB/s write 2.15 MB/s ... success
test 5b: scatter/gather for 2-sectors buflen 8k
test 5: sent 1000.00 kB read 2.39 MB/s write 2.09 MB/s ... success
test 5c: scatter/gather for 2-sectors buflen 16k
test 5: sent 1000.00 kB read 2.37 MB/s write 1.91 MB/s ... success
test 5d: scatter/gather for 2-sectors buflen 32k
test 5: sent 1000.00 kB read 2.36 MB/s write 1.90 MB/s ... success
test 5e: scatter/gather for 2-sectors buflen 64k
test 5: sent 1000.00 kB read 2.37 MB/s write 1.88 MB/s ... success
test 6a: scatter/gather for 8-sectors buflen 4k
test 6: sent 3.91 MB read 7.08 MB/s write 6.26 MB/s ... success
test 6b: scatter/gather for 8-sectors buflen 8k
test 6: sent 3.91 MB read 7.12 MB/s write 6.35 MB/s ... success
test 6c: scatter/gather for 8-sectors buflen 16k
test 6: sent 3.91 MB read 7.11 MB/s write 6.34 MB/s ... success
test 6d: scatter/gather for 8-sectors buflen 32k
test 6: sent 3.91 MB read 7.14 MB/s write 6.30 MB/s ... success
test 6e: scatter/gather for 8-sectors buflen 64k
test 6: sent 3.91 MB read 7.13 MB/s write 6.34 MB/s ... success
test 7a: scatter/gather for 32-sectors buflen 16k
test 7: sent 15.62 MB read 15.25 MB/s write 12.48 MB/s ... success
test 7b: scatter/gather for 32-sectors buflen 32k
test 7: sent 15.62 MB read 15.36 MB/s write 12.33 MB/s ... success
test 7c: scatter/gather for 32-sectors buflen 64k
test 7: sent 15.62 MB read 15.21 MB/s write 12.01 MB/s ... success
test 8a: scatter/gather for 64-sectors buflen 32k
test 8: sent 31.25 MB read 21.46 MB/s write 17.75 MB/s ... success
test 8b: scatter/gather for 64-sectors buflen 64k
test 8: sent 31.25 MB read 20.00 MB/s write 17.37 MB/s ... success
test 9: scatter/gather for 128-sectors buflen 64k
test 9: sent 62.50 MB read 22.34 MB/s write 19.13 MB/s ... success
test 10: read over the end of the block device
test 10: sent 62.01 MB read 0.00 MB/s write 0.00 MB/s ... success
test 11: lseek past the end of the block device
test 11: sent 0.00 B read 0.00 MB/s write 0.00 MB/s ... success
test 12: write over the end of the block device
test 12: sent 0.00 B read 0.00 MB/s write 0.00 MB/s ... success
test 13: write 1 sg, read 8 random size sgs
test 13: sent 62.50 MB read 22.91 MB/s write 19.63 MB/s ... success
test 14: write 8 random size sgs, read 1 sg
test 14: sent 62.50 MB read 23.84 MB/s write 19.25 MB/s ... success
test 15: write and read 8 random size sgs
test 15: sent 62.50 MB read 23.56 MB/s write 19.07 MB/s ... success
test 16a: read with heap allocated buffer
test 16: sent 62.50 MB read 22.42 MB/s write 0.00 MB/s ... success
test 16b: read with stack allocated buffer
test 16: sent 62.50 MB read 21.77 MB/s write 0.00 MB/s ... success
test 17a: write with heap allocated buffer
test 17: sent 0.00 B read 0.00 MB/s write 20.26 MB/s ... success
test 17b: write with stack allocated buffer
test 17: sent 0.00 B read 0.00 MB/s write 21.71 MB/s ... success
test 18a: write 0x00 and read it back
test 18: sent 62.50 MB read 22.36 MB/s write 19.00 MB/s ... success
test 18b: write 0xff and read it back
test 18: sent 62.50 MB read 21.25 MB/s write 17.80 MB/s ... success
test 18c: write 0x55 and read it back
test 18: sent 62.50 MB read 24.99 MB/s write 18.85 MB/s ... success
test 18d: write 0xaa and read it back
test 18: sent 62.50 MB read 22.74 MB/s write 19.07 MB/s ... success
test 18e: write 0x11 and read it back
test 18: sent 62.50 MB read 22.81 MB/s write 19.04 MB/s ... success
test 18f: write 0x22 and read it back
test 18: sent 62.50 MB read 22.37 MB/s write 18.90 MB/s ... success
test 18g: write 0x44 and read it back
test 18: sent 62.50 MB read 22.54 MB/s write 18.91 MB/s ... success
test 18h: write 0x88 and read it back
test 18: sent 62.50 MB read 22.31 MB/s write 19.05 MB/s ... success
test 18i: write 0x33 and read it back
test 18: sent 62.50 MB read 22.55 MB/s write 18.86 MB/s ... success
test 18j: write 0x66 and read it back
test 18: sent 62.50 MB read 22.60 MB/s write 18.85 MB/s ... success
test 18k: write 0x99 and read it back
test 18: sent 62.50 MB read 22.57 MB/s write 18.86 MB/s ... success
test 18l: write 0xcc and read it back
test 18: sent 62.50 MB read 22.54 MB/s write 18.83 MB/s ... success
test 18m: write 0x77 and read it back
test 18: sent 62.50 MB read 22.80 MB/s write 18.98 MB/s ... success
test 18n: write 0xbb and read it back
test 18: sent 62.50 MB read 22.87 MB/s write 18.79 MB/s ... success
test 18o: write 0xdd and read it back
test 18: sent 62.50 MB read 22.34 MB/s write 18.99 MB/s ... success
test 18p: write 0xee and read it back
test 18: sent 62.50 MB read 24.95 MB/s write 19.33 MB/s ... success
Test suite ended: 2014年 10月 28日星期二 19:33:50 CST

Thanks,
Rui

Huang Rui (19):
usb: dwc3: enable hibernation if to be supported
usb: dwc3: add a flag to check if it is fpga board
usb: dwc3: initialize platform data at pci glue layer
usb: dwc3: add disscramble quirk
usb: dwc3: add lpm erratum support
usb: dwc3: add u2exit lfps quirk
usb: dwc3: add P3 in U2 SS inactive quirk
usb: dwc3: add request p1p2p3 quirk
usb: dwc3: add delay p1p2p3 quirk
usb: dwc3: add delay phy power change quirk
usb: dwc3: add lfps filter quirk
usb: dwc3: add rx_detect to polling lfps quirk
usb: dwc3: add tx demphasis quirk
usb: dwc3: set SUSPHY bit for all cores
usb: dwc3: add disable usb3 suspend phy quirk
usb: dwc3: add disable usb2 suspend phy quirk
PCI: Add support for AMD Nolan USB3 DRD
PCI: Add quirk to prevent AMD NL USB3 DRD to bind with xHCI driver
usb: dwc3: add support for AMD NL platform

drivers/pci/quirks.c | 20 +++++
drivers/usb/dwc3/core.c | 158 ++++++++++++++++++++++++++++++++++++++-
drivers/usb/dwc3/core.h | 74 +++++++++++++++---
drivers/usb/dwc3/dwc3-pci.c | 28 +++++++
drivers/usb/dwc3/gadget.c | 13 ++++
drivers/usb/dwc3/platform_data.h | 17 +++++
include/linux/pci_ids.h | 1 +
7 files changed, 300 insertions(+), 11 deletions(-)

--
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

Next message: Huang Rui: "[PATCH v3 02/19] usb: dwc3: add a flag to check if it is fpga board"
Previous message: Clemens Ladisch: "Re: [PATCH 00/11] Add AXD Audio Processing IP driver"
Next in thread: Huang Rui: "[PATCH v3 02/19] usb: dwc3: add a flag to check if it is fpga board"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]