[PATCH v4 33/58] dmaengine: omap: Split device_control
From: Maxime Ripard
Date: Tue Oct 28 2014 - 17:31:50 EST
Split the device_control callback of the TI OMAP DMA driver to make use
of the newly introduced callbacks, that will eventually be used to retrieve
slave capabilities.
Signed-off-by: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
---
drivers/dma/omap-dma.c | 51 +++++++++++++++-----------------------------------
1 file changed, 15 insertions(+), 36 deletions(-)
diff --git a/drivers/dma/omap-dma.c b/drivers/dma/omap-dma.c
index 8035b8c33cfd..90c0bdd53bb0 100644
--- a/drivers/dma/omap-dma.c
+++ b/drivers/dma/omap-dma.c
@@ -948,8 +948,10 @@ static struct dma_async_tx_descriptor *omap_dma_prep_dma_cyclic(
return vchan_tx_prep(&c->vc, &d->vd, flags);
}
-static int omap_dma_slave_config(struct omap_chan *c, struct dma_slave_config *cfg)
+static int omap_dma_slave_config(struct dma_chan *chan, struct dma_slave_config *cfg)
{
+ struct omap_chan *c = to_omap_dma_chan(chan);
+
if (cfg->src_addr_width == DMA_SLAVE_BUSWIDTH_8_BYTES ||
cfg->dst_addr_width == DMA_SLAVE_BUSWIDTH_8_BYTES)
return -EINVAL;
@@ -959,8 +961,9 @@ static int omap_dma_slave_config(struct omap_chan *c, struct dma_slave_config *c
return 0;
}
-static int omap_dma_terminate_all(struct omap_chan *c)
+static int omap_dma_terminate_all(struct dma_chan *chan)
{
+ struct omap_chan *c = to_omap_dma_chan(chan);
struct omap_dmadev *d = to_omap_dma_dev(c->vc.chan.device);
unsigned long flags;
LIST_HEAD(head);
@@ -996,8 +999,10 @@ static int omap_dma_terminate_all(struct omap_chan *c)
return 0;
}
-static int omap_dma_pause(struct omap_chan *c)
+static int omap_dma_pause(struct dma_chan *chan)
{
+ struct omap_chan *c = to_omap_dma_chan(chan);
+
/* Pause/Resume only allowed with cyclic mode */
if (!c->cyclic)
return -EINVAL;
@@ -1010,8 +1015,10 @@ static int omap_dma_pause(struct omap_chan *c)
return 0;
}
-static int omap_dma_resume(struct omap_chan *c)
+static int omap_dma_resume(struct dma_chan *chan)
{
+ struct omap_chan *c = to_omap_dma_chan(chan);
+
/* Pause/Resume only allowed with cyclic mode */
if (!c->cyclic)
return -EINVAL;
@@ -1029,37 +1036,6 @@ static int omap_dma_resume(struct omap_chan *c)
return 0;
}
-static int omap_dma_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd,
- unsigned long arg)
-{
- struct omap_chan *c = to_omap_dma_chan(chan);
- int ret;
-
- switch (cmd) {
- case DMA_SLAVE_CONFIG:
- ret = omap_dma_slave_config(c, (struct dma_slave_config *)arg);
- break;
-
- case DMA_TERMINATE_ALL:
- ret = omap_dma_terminate_all(c);
- break;
-
- case DMA_PAUSE:
- ret = omap_dma_pause(c);
- break;
-
- case DMA_RESUME:
- ret = omap_dma_resume(c);
- break;
-
- default:
- ret = -ENXIO;
- break;
- }
-
- return ret;
-}
-
static int omap_dma_chan_init(struct omap_dmadev *od, int dma_sig)
{
struct omap_chan *c;
@@ -1138,7 +1114,10 @@ static int omap_dma_probe(struct platform_device *pdev)
od->ddev.device_issue_pending = omap_dma_issue_pending;
od->ddev.device_prep_slave_sg = omap_dma_prep_slave_sg;
od->ddev.device_prep_dma_cyclic = omap_dma_prep_dma_cyclic;
- od->ddev.device_control = omap_dma_control;
+ od->ddev.device_config = omap_dma_config;
+ od->ddev.device_pause = omap_dma_pause;
+ od->ddev.device_resume = omap_dma_resume;
+ od->ddev.device_terminate_all = omap_dma_terminate_all;
od->ddev.device_slave_caps = omap_dma_device_slave_caps;
od->ddev.dev = &pdev->dev;
INIT_LIST_HEAD(&od->ddev.channels);
--
2.1.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/