Re: [PATCH v7 0/7] usb: add support for the generic PHY framework

[Peter Chen]

On Tue, Oct 28, 2014 at 05:35:34PM +0100, Antoine Tenart wrote:
> The series can be found at:
> git://git.free-electrons.com:users/antoine-tenart/linux.git usb-phy
> 
> Changes since v6:
> 	- rebased on top of v3.18-rc2
> 
> Changes since v5:
>         - rebased on the latest version of Sergei's series[1]
>         - fixed one modifiaction made in the wrong patch
> 
> Changes since v4:
>         - reworked the PHY handling in ci_hdrc_probe()
>         - fixed a rebase error
> 
> Changes since v3:
>         - moved phy_exit() after phy_power_on()
>         - fixed the PHY handling in ci_hdrc_probe()
>         - some little fixes
> 
> Changes since v2:
>         - rebased the series on top of v3.17-rc1
>         - switched to devm_phy_get() to handle non DT cases
>         - moved usb_otg into the ci_hdrc structure
> 
> Changes since v1:
>         - rebased the series on top of [2] (generic PHY support for HCD)
>         - split s/phy/usb_phy/ renaming and generic PHY support in separate
>           patches
> 
> [1] https://www.mail-archive.com/linux-usb%40vger.kernel.org/msg48068.html
> 
> Antoine Tenart (7):
>   usb: move the OTG state from the USB PHY to the OTG structure
>   usb: rename phy to usb_phy in OTG
>   usb: add support to the generic PHY framework in OTG
>   usb: allow to supply the PHY in the drivers when using HCD
>   usb: rename transceiver and phy to usb_phy in ChipIdea
>   usb: chipidea: move usb_otg into struct ci_hdrc
>   usb: chipidea: add support to the generic PHY framework in ChipIdea
> 
>  drivers/phy/phy-omap-usb2.c         | 14 ++----
>  drivers/usb/chipidea/ci.h           |  8 +++-
>  drivers/usb/chipidea/ci_hdrc_imx.c  |  2 +-
>  drivers/usb/chipidea/ci_hdrc_msm.c  |  8 ++--
>  drivers/usb/chipidea/core.c         | 89 ++++++++++++++++++++++++++--------
>  drivers/usb/chipidea/debug.c        |  2 +-
>  drivers/usb/chipidea/host.c         | 10 ++--
>  drivers/usb/chipidea/otg_fsm.c      | 30 +++++-------
>  drivers/usb/chipidea/udc.c          |  4 +-
>  drivers/usb/common/usb-otg-fsm.c    |  8 ++--
>  drivers/usb/core/hcd.c              |  7 +--
>  drivers/usb/host/ohci-omap.c        |  2 +-
>  drivers/usb/musb/am35x.c            | 28 +++++------
>  drivers/usb/musb/blackfin.c         | 18 +++----
>  drivers/usb/musb/da8xx.c            | 28 +++++------
>  drivers/usb/musb/davinci.c          | 18 +++----
>  drivers/usb/musb/musb_core.c        | 94 ++++++++++++++++++------------------
>  drivers/usb/musb/musb_dsps.c        | 26 +++++-----
>  drivers/usb/musb/musb_gadget.c      | 36 +++++++-------
>  drivers/usb/musb/musb_host.c        |  8 ++--
>  drivers/usb/musb/musb_virthub.c     | 22 ++++-----
>  drivers/usb/musb/omap2430.c         | 30 ++++++------
>  drivers/usb/musb/tusb6010.c         | 40 ++++++++--------
>  drivers/usb/musb/ux500.c            | 10 ++--
>  drivers/usb/phy/phy-ab8500-usb.c    | 16 +++----
>  drivers/usb/phy/phy-fsl-usb.c       | 23 ++++-----
>  drivers/usb/phy/phy-generic.c       |  6 +--
>  drivers/usb/phy/phy-gpio-vbus-usb.c | 14 +++---
>  drivers/usb/phy/phy-isp1301-omap.c  | 10 ++--
>  drivers/usb/phy/phy-msm-usb.c       | 95 +++++++++++++++++++------------------
>  drivers/usb/phy/phy-mv-usb.c        | 50 +++++++++----------
>  drivers/usb/phy/phy-tahvo.c         |  8 ++--
>  drivers/usb/phy/phy-ulpi.c          |  6 +--
>  include/linux/usb/chipidea.h        |  4 +-
>  include/linux/usb/otg.h             |  7 ++-
>  include/linux/usb/phy.h             |  1 -
>  36 files changed, 420 insertions(+), 362 deletions(-)
> 
> -- 
> 1.9.1
> 

Tested the whole patch set at imx6 hardware, and you can add
my Acked-by to the last three chipidea patches.

I hope your patch-set can be queued soon, since I find the rebase
error with my next tree, I can put your patches on the top.

-- 
Best Regards,
Peter Chen
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/