[PATCH 0/3] Add Reset Controller for MediaTek SoC

[flora.fu]

This driver is based on 3.18-rc1. . 
This series adds support generic reset controller for MediaTek SoC.
Reset registers contain several bytes and each bit is able to reset individual module in SoC.
 - Patch 1/3: Add a driver in reset controller
 - Patch 2/3: Add device tree bindings
 - Patch 3/3: Add reset controller to MT8135 board dts
   
 Flora Fu (3):
  ARM: mediatek: Add Reset Controller for MediaTek SoC
  dt-bindings: Add Reset Controller for MediaTek SoC
  ARM: dts: mt8135: Add Reset Controller for MediaTek SoC

 .../devicetree/bindings/reset/mediatek,reset.txt   |  37 +++++
 arch/arm/boot/dts/mt8135.dtsi                      |  22 +++
 drivers/reset/Makefile                             |   1 +
 drivers/reset/reset-mtk.c                          | 149 +++++++++++++++++++++
 4 files changed, 209 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/reset/mediatek,reset.txt
 create mode 100644 drivers/reset/reset-mtk.c

--
1.8.1.1.dirty


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/