Re: [PATCH 0/3] Delay I2C OF IRQ mapping until probe time
From: Thierry Reding
Date: Thu Oct 30 2014 - 10:28:08 EST
On Thu, Oct 30, 2014 at 03:59:35PM +0200, Laurent Pinchart wrote:
> Hello,
>
> I recently ran into an issue with the OF IRQ parsing code in the I2C core
> (of_i2c_register_devices in drivers/i2c/i2c-core.c).
>
> My DT contains the following nodes.
>
> gpio1: gpio@e6051000 {
> ...
> #interrupt-cells = <2>;
> interrupt-controller;
> clocks = <&mstp9_clks R8A7790_CLK_GPIO1>;
> };
>
> iic2: i2c@e6520000 {
> #address-cells = <1>;
> #size-cells = <0>;
> ...
> hdmi@39 {
> compatible = "adi,adv7511w";
> reg = <0x39>;
> interrupt-parent = <&gpio1>;
> interrupts = <15 IRQ_TYPE_EDGE_FALLING>;
> ...
> };
> };
>
> mstp9_clks: mstp9_clks@e6150994 {
> ...
> };
>
> The i2c@e6520000 node is probed before the gpio@e6051000 node. The
> of_i2c_register_devices() function tries to register all children, including
> hdmi@39. It tries to parse and map the I2C client IRQ by calling
> irq_of_parse_and_map(), which returns 0 as the interrupt controller isn't
> probed yet. The adv7511 driver later probes the hdmi@39 device and gets
> client->irq set to 0.
>
> As we can't control the probe order in the general case we need to rely on
> deferred probing. This patch series is an attempt to do so, by moving IRQ
> mapping from device registration time to device probe time were probing can be
> deferred.
>
> Laurent Pinchart (3):
> of/irq: Export of_irq_get()
> i2c: core: Dispose OF IRQ mapping at client removal time
> i2c: core: Map OF IRQ at probe time
>
> drivers/i2c/i2c-core.c | 14 ++++++++++++--
> drivers/of/irq.c | 1 +
> 2 files changed, 13 insertions(+), 2 deletions(-)
The series:
Reviewed-by: Thierry Reding <treding@xxxxxxxxxx>
Attachment:
pgp5QWA_PbDxB.pgp
Description: PGP signature