[PATCH 0/1] Compact interface for Device-Tree

[Gilad Avidov]

Device-Tree compact API
------------------------

Common code seen in driverâs probe reads device tree values and handling
erroneous return codes from all those of_property_read_xxx()  APIs. This
common code is factored out by the of_property_map module which allows
driverâs probe to replace that (often lengthy) code with a concise table:

struct of_prop_map map[] = {
    {"i2c",            &dev->id,        OF_REQ,  OF_ID,  -1},
    {"qcom,clk-freq-out",    &dev->clk_freq_out,    OF_REQ,  OF_U32,  0},
    {"qcom,clk-freq-in",    &dev->clk_freq_in,    OF_REQ,  OF_U32,  0},
    {"qcom,disable-dma",    &dev->disable_dma,    OF_OPT,  OF_BOOL, 0},
    {"qcom,master-id",    &dev->mstr_id,        OF_SGST, OF_U32,  0},
    {NULL,            NULL,            0,       0,       0},
};

Then call populate to read the values into the deviceâs variables:

ret = of_prop_populate(dev, dev->of_node, map);


An equivalent code snippet using the traditional of_property_read_XXXX()
API. Note that the equivalent is longer and more difficult to follow and
debug:

/* optional property */
dev->disable_dma = of_property_read_bool(node, "qcom,disable-dma");

ret = of_property_read_u32(dev->node, "qcom,clk-freq-out", &dev->clk_freq_out);
if (ret) {
    dev_err(dev, "error: missing 'qcom,clk-freq-out' DT property\n");
    if (!err)
        err = ret;
}

ret = of_property_read_u32(dev->node, "qcom,clk-freq-in", &dev->clk_freq_in);
if (ret) {
    dev_err(dev, "error: missing 'qcom,clk-freq-in' DT property\n");
    if (!err)
        err = ret;
}

/* suggested property */
ret = of_property_read_u32(dev->node, "qcom,master-id", &dev->mstr_id);
if (ret && !err)
    err = ret;


ret = of_alias_get_id(dev->node, "i2c");
if (ret < 0) {
    dev_err(dev, "error: missing '"i2c"' DT property\n");
    if (!err)
        err = ret;
} else {
    dev->id = ret;
}


The Device-Tree node and alias which are read by the above code snippets:

aliases {
    i2c0 = &i2c_0; /* I2C0 controller device */
};

i2c_0: i2c@78b6000 { /* BLSP1 QUP2 */
    compatible = "qcom,i2c-msm-v2";
    reg-names = "qup_phys_addr", "bam_phys_addr";
    reg = <0x78b6000 0x600>,
          <0x7884000 0x23000>;
    qcom,clk-freq-out = <100000>;
    qcom,clk-freq-in  = <19200000>;
    qcom,disable-dma;
    qcom,master-id = <86>;
}; 


Gilad Avidov (1):
  of_propery_map: compact interface for Device-Tree

 Documentation/devicetree/of_property_map.txt |   76 ++++++++++++++++++++++
 drivers/of/Makefile                          |    2 +-
 drivers/of/of_property_map.c                 |   88 ++++++++++++++++++++++++++
 include/linux/of_property_map.h              |   74 ++++++++++++++++++++++
 4 files changed, 239 insertions(+), 1 deletion(-)
 create mode 100644 Documentation/devicetree/of_property_map.txt
 create mode 100644 drivers/of/of_property_map.c
 create mode 100644 include/linux/of_property_map.h

-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
hosted by The Linux Foundation

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/