[PATCH V2 13/13] arm: mmp: Make use of the DT supported clock
From: Chao Xie
Date: Thu Oct 30 2014 - 22:12:33 EST
From: Chao Xie <chao.xie@xxxxxxxxxxx>
Change the dtsi and dts file, soc initialization code to make
use of DT support clock.
So now in the code we do only need call of_clk_init to initialize
the clocks.
Signed-off-by: Chao Xie <chao.xie@xxxxxxxxxxx>
---
arch/arm/boot/dts/mmp2.dtsi | 27 ++++++++++++++++++++
arch/arm/boot/dts/pxa168.dtsi | 25 +++++++++++++++++++
arch/arm/boot/dts/pxa910.dtsi | 26 ++++++++++++++++++++
arch/arm/mach-mmp/Kconfig | 12 ++++-----
arch/arm/mach-mmp/mmp-dt.c | 57 ++++++++++++++-----------------------------
arch/arm/mach-mmp/mmp2-dt.c | 26 +++++++-------------
6 files changed, 111 insertions(+), 62 deletions(-)
diff --git a/arch/arm/boot/dts/mmp2.dtsi b/arch/arm/boot/dts/mmp2.dtsi
index e44f996..766bbb8 100644
--- a/arch/arm/boot/dts/mmp2.dtsi
+++ b/arch/arm/boot/dts/mmp2.dtsi
@@ -8,6 +8,7 @@
*/
#include "skeleton.dtsi"
+#include <dt-bindings/clock/marvell,mmp2.h>
/ {
aliases {
@@ -135,6 +136,8 @@
compatible = "mrvl,mmp-uart";
reg = <0xd4030000 0x1000>;
interrupts = <27>;
+ clocks = <&soc_clocks MMP2_CLK_UART0>;
+ resets = <&soc_clocks MMP2_CLK_UART0>;
status = "disabled";
};
@@ -142,6 +145,8 @@
compatible = "mrvl,mmp-uart";
reg = <0xd4017000 0x1000>;
interrupts = <28>;
+ clocks = <&soc_clocks MMP2_CLK_UART1>;
+ resets = <&soc_clocks MMP2_CLK_UART1>;
status = "disabled";
};
@@ -149,6 +154,8 @@
compatible = "mrvl,mmp-uart";
reg = <0xd4018000 0x1000>;
interrupts = <24>;
+ clocks = <&soc_clocks MMP2_CLK_UART2>;
+ resets = <&soc_clocks MMP2_CLK_UART2>;
status = "disabled";
};
@@ -156,6 +163,8 @@
compatible = "mrvl,mmp-uart";
reg = <0xd4016000 0x1000>;
interrupts = <46>;
+ clocks = <&soc_clocks MMP2_CLK_UART3>;
+ resets = <&soc_clocks MMP2_CLK_UART3>;
status = "disabled";
};
@@ -168,6 +177,8 @@
#gpio-cells = <2>;
interrupts = <49>;
interrupt-names = "gpio_mux";
+ clocks = <&soc_clocks MMP2_CLK_GPIO>;
+ resets = <&soc_clocks MMP2_CLK_GPIO>;
interrupt-controller;
#interrupt-cells = <1>;
ranges;
@@ -201,6 +212,8 @@
compatible = "mrvl,mmp-twsi";
reg = <0xd4011000 0x1000>;
interrupts = <7>;
+ clocks = <&soc_clocks MMP2_CLK_TWSI0>;
+ resets = <&soc_clocks MMP2_CLK_TWSI0>;
#address-cells = <1>;
#size-cells = <0>;
mrvl,i2c-fast-mode;
@@ -211,6 +224,8 @@
compatible = "mrvl,mmp-twsi";
reg = <0xd4025000 0x1000>;
interrupts = <58>;
+ clocks = <&soc_clocks MMP2_CLK_TWSI1>;
+ resets = <&soc_clocks MMP2_CLK_TWSI1>;
status = "disabled";
};
@@ -220,8 +235,20 @@
interrupts = <1 0>;
interrupt-names = "rtc 1Hz", "rtc alarm";
interrupt-parent = <&intcmux5>;
+ clocks = <&soc_clocks MMP2_CLK_RTC>;
+ resets = <&soc_clocks MMP2_CLK_RTC>;
status = "disabled";
};
};
+
+ soc_clocks: clocks{
+ compatible = "marvell,mmp2-clock";
+ reg = <0xd4050000 0x1000>,
+ <0xd4282800 0x400>,
+ <0xd4015000 0x1000>;
+ reg-names = "mpmu", "apmu", "apbc";
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
};
};
diff --git a/arch/arm/boot/dts/pxa168.dtsi b/arch/arm/boot/dts/pxa168.dtsi
index bfcbdef..b899e25 100644
--- a/arch/arm/boot/dts/pxa168.dtsi
+++ b/arch/arm/boot/dts/pxa168.dtsi
@@ -8,6 +8,7 @@
*/
#include "skeleton.dtsi"
+#include <dt-bindings/clock/marvell,pxa168.h>
/ {
aliases {
@@ -59,6 +60,8 @@
compatible = "mrvl,mmp-uart";
reg = <0xd4017000 0x1000>;
interrupts = <27>;
+ clocks = <&soc_clocks PXA168_CLK_UART0>;
+ resets = <&soc_clocks PXA168_CLK_UART0>;
status = "disabled";
};
@@ -66,6 +69,8 @@
compatible = "mrvl,mmp-uart";
reg = <0xd4018000 0x1000>;
interrupts = <28>;
+ clocks = <&soc_clocks PXA168_CLK_UART1>;
+ resets = <&soc_clocks PXA168_CLK_UART1>;
status = "disabled";
};
@@ -73,6 +78,8 @@
compatible = "mrvl,mmp-uart";
reg = <0xd4026000 0x1000>;
interrupts = <29>;
+ clocks = <&soc_clocks PXA168_CLK_UART2>;
+ resets = <&soc_clocks PXA168_CLK_UART2>;
status = "disabled";
};
@@ -84,6 +91,8 @@
gpio-controller;
#gpio-cells = <2>;
interrupts = <49>;
+ clocks = <&soc_clocks PXA168_CLK_GPIO>;
+ resets = <&soc_clocks PXA168_CLK_GPIO>;
interrupt-names = "gpio_mux";
interrupt-controller;
#interrupt-cells = <1>;
@@ -110,6 +119,8 @@
compatible = "mrvl,mmp-twsi";
reg = <0xd4011000 0x1000>;
interrupts = <7>;
+ clocks = <&soc_clocks PXA168_CLK_TWSI0>;
+ resets = <&soc_clocks PXA168_CLK_TWSI0>;
mrvl,i2c-fast-mode;
status = "disabled";
};
@@ -118,6 +129,8 @@
compatible = "mrvl,mmp-twsi";
reg = <0xd4025000 0x1000>;
interrupts = <58>;
+ clocks = <&soc_clocks PXA168_CLK_TWSI1>;
+ resets = <&soc_clocks PXA168_CLK_TWSI1>;
status = "disabled";
};
@@ -126,8 +139,20 @@
reg = <0xd4010000 0x1000>;
interrupts = <5 6>;
interrupt-names = "rtc 1Hz", "rtc alarm";
+ clocks = <&soc_clocks PXA168_CLK_RTC>;
+ resets = <&soc_clocks PXA168_CLK_RTC>;
status = "disabled";
};
};
+
+ soc_clocks: clocks{
+ compatible = "marvell,pxa168-clock";
+ reg = <0xd4050000 0x1000>,
+ <0xd4282800 0x400>,
+ <0xd4015000 0x1000>;
+ reg-names = "mpmu", "apmu", "apbc";
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
};
};
diff --git a/arch/arm/boot/dts/pxa910.dtsi b/arch/arm/boot/dts/pxa910.dtsi
index 884c6e8..0868f67 100644
--- a/arch/arm/boot/dts/pxa910.dtsi
+++ b/arch/arm/boot/dts/pxa910.dtsi
@@ -8,6 +8,7 @@
*/
#include "skeleton.dtsi"
+#include <dt-bindings/clock/marvell,pxa910.h>
/ {
aliases {
@@ -71,6 +72,8 @@
compatible = "mrvl,mmp-uart";
reg = <0xd4017000 0x1000>;
interrupts = <27>;
+ clocks = <&soc_clocks PXA910_CLK_UART0>;
+ resets = <&soc_clocks PXA910_CLK_UART0>;
status = "disabled";
};
@@ -78,6 +81,8 @@
compatible = "mrvl,mmp-uart";
reg = <0xd4018000 0x1000>;
interrupts = <28>;
+ clocks = <&soc_clocks PXA910_CLK_UART1>;
+ resets = <&soc_clocks PXA910_CLK_UART1>;
status = "disabled";
};
@@ -85,6 +90,8 @@
compatible = "mrvl,mmp-uart";
reg = <0xd4036000 0x1000>;
interrupts = <59>;
+ clocks = <&soc_clocks PXA910_CLK_UART2>;
+ resets = <&soc_clocks PXA910_CLK_UART2>;
status = "disabled";
};
@@ -97,6 +104,8 @@
#gpio-cells = <2>;
interrupts = <49>;
interrupt-names = "gpio_mux";
+ clocks = <&soc_clocks PXA910_CLK_GPIO>;
+ resets = <&soc_clocks PXA910_CLK_GPIO>;
interrupt-controller;
#interrupt-cells = <1>;
ranges;
@@ -124,6 +133,8 @@
#size-cells = <0>;
reg = <0xd4011000 0x1000>;
interrupts = <7>;
+ clocks = <&soc_clocks PXA910_CLK_TWSI0>;
+ resets = <&soc_clocks PXA910_CLK_TWSI0>;
mrvl,i2c-fast-mode;
status = "disabled";
};
@@ -134,6 +145,8 @@
#size-cells = <0>;
reg = <0xd4037000 0x1000>;
interrupts = <54>;
+ clocks = <&soc_clocks PXA910_CLK_TWSI1>;
+ resets = <&soc_clocks PXA910_CLK_TWSI1>;
status = "disabled";
};
@@ -142,8 +155,21 @@
reg = <0xd4010000 0x1000>;
interrupts = <5 6>;
interrupt-names = "rtc 1Hz", "rtc alarm";
+ clocks = <&soc_clocks PXA910_CLK_RTC>;
+ resets = <&soc_clocks PXA910_CLK_RTC>;
status = "disabled";
};
};
+
+ soc_clocks: clocks{
+ compatible = "marvell,pxa910-clock";
+ reg = <0xd4050000 0x1000>,
+ <0xd4282800 0x400>,
+ <0xd4015000 0x1000>,
+ <0xd403b000 0x1000>;
+ reg-names = "mpmu", "apmu", "apbc", "apbcp";
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
};
};
diff --git a/arch/arm/mach-mmp/Kconfig b/arch/arm/mach-mmp/Kconfig
index ebdba87..fdbfadf 100644
--- a/arch/arm/mach-mmp/Kconfig
+++ b/arch/arm/mach-mmp/Kconfig
@@ -86,11 +86,12 @@ config MACH_GPLUGD
config MACH_MMP_DT
bool "Support MMP (ARMv5) platforms from device tree"
- select CPU_PXA168
- select CPU_PXA910
select USE_OF
select PINCTRL
select PINCTRL_SINGLE
+ select COMMON_CLK
+ select ARCH_HAS_RESET_CONTROLLER
+ select CPU_MOHAWK
help
Include support for Marvell MMP2 based platforms using
the device tree. Needn't select any other machine while
@@ -99,10 +100,12 @@ config MACH_MMP_DT
config MACH_MMP2_DT
bool "Support MMP2 (ARMv7) platforms from device tree"
depends on !CPU_MOHAWK
- select CPU_MMP2
select USE_OF
select PINCTRL
select PINCTRL_SINGLE
+ select COMMON_CLK
+ select ARCH_HAS_RESET_CONTROLLER
+ select CPU_PJ4
help
Include support for Marvell MMP2 based platforms using
the device tree.
@@ -111,21 +114,18 @@ endmenu
config CPU_PXA168
bool
- select COMMON_CLK
select CPU_MOHAWK
help
Select code specific to PXA168
config CPU_PXA910
bool
- select COMMON_CLK
select CPU_MOHAWK
help
Select code specific to PXA910
config CPU_MMP2
bool
- select COMMON_CLK
select CPU_PJ4
help
Select code specific to MMP2. MMP2 is ARMv7 compatible.
diff --git a/arch/arm/mach-mmp/mmp-dt.c b/arch/arm/mach-mmp/mmp-dt.c
index cca529c..b2296c9 100644
--- a/arch/arm/mach-mmp/mmp-dt.c
+++ b/arch/arm/mach-mmp/mmp-dt.c
@@ -11,63 +11,42 @@
#include <linux/irqchip.h>
#include <linux/of_platform.h>
+#include <linux/clk-provider.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
+#include <asm/hardware/cache-tauros2.h>
#include "common.h"
extern void __init mmp_dt_init_timer(void);
-static const struct of_dev_auxdata pxa168_auxdata_lookup[] __initconst = {
- OF_DEV_AUXDATA("mrvl,mmp-uart", 0xd4017000, "pxa2xx-uart.0", NULL),
- OF_DEV_AUXDATA("mrvl,mmp-uart", 0xd4018000, "pxa2xx-uart.1", NULL),
- OF_DEV_AUXDATA("mrvl,mmp-uart", 0xd4026000, "pxa2xx-uart.2", NULL),
- OF_DEV_AUXDATA("mrvl,mmp-twsi", 0xd4011000, "pxa2xx-i2c.0", NULL),
- OF_DEV_AUXDATA("mrvl,mmp-twsi", 0xd4025000, "pxa2xx-i2c.1", NULL),
- OF_DEV_AUXDATA("marvell,mmp-gpio", 0xd4019000, "mmp-gpio", NULL),
- OF_DEV_AUXDATA("mrvl,mmp-rtc", 0xd4010000, "sa1100-rtc", NULL),
- {}
+static const char *pxa168_dt_board_compat[] __initdata = {
+ "mrvl,pxa168-aspenite",
+ NULL,
};
-static const struct of_dev_auxdata pxa910_auxdata_lookup[] __initconst = {
- OF_DEV_AUXDATA("mrvl,mmp-uart", 0xd4017000, "pxa2xx-uart.0", NULL),
- OF_DEV_AUXDATA("mrvl,mmp-uart", 0xd4018000, "pxa2xx-uart.1", NULL),
- OF_DEV_AUXDATA("mrvl,mmp-uart", 0xd4036000, "pxa2xx-uart.2", NULL),
- OF_DEV_AUXDATA("mrvl,mmp-twsi", 0xd4011000, "pxa2xx-i2c.0", NULL),
- OF_DEV_AUXDATA("mrvl,mmp-twsi", 0xd4037000, "pxa2xx-i2c.1", NULL),
- OF_DEV_AUXDATA("marvell,mmp-gpio", 0xd4019000, "mmp-gpio", NULL),
- OF_DEV_AUXDATA("mrvl,mmp-rtc", 0xd4010000, "sa1100-rtc", NULL),
- {}
+static const char *pxa910_dt_board_compat[] __initdata = {
+ "mrvl,pxa910-dkb",
+ NULL,
};
-static void __init pxa168_dt_init(void)
-{
- of_platform_populate(NULL, of_default_bus_match_table,
- pxa168_auxdata_lookup, NULL);
-}
-
-static void __init pxa910_dt_init(void)
+static void __init mmp_init_time(void)
{
- of_platform_populate(NULL, of_default_bus_match_table,
- pxa910_auxdata_lookup, NULL);
+#ifdef CONFIG_CACHE_TAUROS2
+ tauros2_init(0);
+#endif
+ mmp_dt_init_timer();
+ of_clk_init(NULL);
}
-static const char *mmp_dt_board_compat[] __initdata = {
- "mrvl,pxa168-aspenite",
- "mrvl,pxa910-dkb",
- NULL,
-};
-
DT_MACHINE_START(PXA168_DT, "Marvell PXA168 (Device Tree Support)")
.map_io = mmp_map_io,
- .init_time = mmp_dt_init_timer,
- .init_machine = pxa168_dt_init,
- .dt_compat = mmp_dt_board_compat,
+ .init_time = mmp_init_time,
+ .dt_compat = pxa168_dt_board_compat,
MACHINE_END
DT_MACHINE_START(PXA910_DT, "Marvell PXA910 (Device Tree Support)")
.map_io = mmp_map_io,
- .init_time = mmp_dt_init_timer,
- .init_machine = pxa910_dt_init,
- .dt_compat = mmp_dt_board_compat,
+ .init_time = mmp_init_time,
+ .dt_compat = pxa910_dt_board_compat,
MACHINE_END
diff --git a/arch/arm/mach-mmp/mmp2-dt.c b/arch/arm/mach-mmp/mmp2-dt.c
index 023cb45..998c0f5 100644
--- a/arch/arm/mach-mmp/mmp2-dt.c
+++ b/arch/arm/mach-mmp/mmp2-dt.c
@@ -12,29 +12,22 @@
#include <linux/io.h>
#include <linux/irqchip.h>
#include <linux/of_platform.h>
+#include <linux/clk-provider.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
+#include <asm/hardware/cache-tauros2.h>
#include "common.h"
extern void __init mmp_dt_init_timer(void);
-static const struct of_dev_auxdata mmp2_auxdata_lookup[] __initconst = {
- OF_DEV_AUXDATA("mrvl,mmp-uart", 0xd4030000, "pxa2xx-uart.0", NULL),
- OF_DEV_AUXDATA("mrvl,mmp-uart", 0xd4017000, "pxa2xx-uart.1", NULL),
- OF_DEV_AUXDATA("mrvl,mmp-uart", 0xd4018000, "pxa2xx-uart.2", NULL),
- OF_DEV_AUXDATA("mrvl,mmp-uart", 0xd4016000, "pxa2xx-uart.3", NULL),
- OF_DEV_AUXDATA("mrvl,mmp-twsi", 0xd4011000, "pxa2xx-i2c.0", NULL),
- OF_DEV_AUXDATA("mrvl,mmp-twsi", 0xd4025000, "pxa2xx-i2c.1", NULL),
- OF_DEV_AUXDATA("marvell,mmp-gpio", 0xd4019000, "mmp2-gpio", NULL),
- OF_DEV_AUXDATA("mrvl,mmp-rtc", 0xd4010000, "sa1100-rtc", NULL),
- {}
-};
-
-static void __init mmp2_dt_init(void)
+static void __init mmp_init_time(void)
{
- of_platform_populate(NULL, of_default_bus_match_table,
- mmp2_auxdata_lookup, NULL);
+#ifdef CONFIG_CACHE_TAUROS2
+ tauros2_init(0);
+#endif
+ mmp_dt_init_timer();
+ of_clk_init(NULL);
}
static const char *mmp2_dt_board_compat[] __initdata = {
@@ -44,7 +37,6 @@ static const char *mmp2_dt_board_compat[] __initdata = {
DT_MACHINE_START(MMP2_DT, "Marvell MMP2 (Device Tree Support)")
.map_io = mmp_map_io,
- .init_time = mmp_dt_init_timer,
- .init_machine = mmp2_dt_init,
+ .init_time = mmp_init_time,
.dt_compat = mmp2_dt_board_compat,
MACHINE_END
--
1.8.3.2
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/