Re: [alsa-devel] [PATCH] [RESEND] snd-es18xx: Add GPO controls

[Takashi Iwai]

At Sun,  2 Nov 2014 23:18:49 +0100,
Ondrej Zary wrote:
> 
> Add GPO0 and GPO1 (General Purpose Outputs) controls to mixer.
> These can be used on some cards to control amplifier mute (seen in ES1868
> datasheet) or additional onboard chips such as QX2130 QXpander processor.
> 
> These GPOs are present on ES1868, ES1869, ES1887 and ES1888 chips.
> 
> Tested on ES1868 with QX2130.
> 
> Signed-off-by: Ondrej Zary <linux@xxxxxxxxxxxxxxxxxxxx>
> ---
>  sound/isa/es18xx.c |   49 +++++++++++++++++++++++++++++++++++++++----------
>  1 file changed, 39 insertions(+), 10 deletions(-)
> 
> diff --git a/sound/isa/es18xx.c b/sound/isa/es18xx.c
> index 6faaac6..8966ed2 100644
> --- a/sound/isa/es18xx.c
> +++ b/sound/isa/es18xx.c
> @@ -156,6 +156,7 @@ struct snd_es18xx {
>  #define ES18XX_I2S	0x0200	/* I2S mixer control */
>  #define ES18XX_MUTEREC	0x0400	/* Record source can be muted */
>  #define ES18XX_CONTROL	0x0800	/* Has control ports */
> +#define ES18XX_GPO_2BIT	0x1000	/* GPO0,1 controlled by PM port */
>  
>  /* Power Management */
>  #define ES18XX_PM	0x07
> @@ -1136,11 +1137,14 @@ static int snd_es18xx_reg_read(struct snd_es18xx *chip, unsigned char reg)
>  		return snd_es18xx_read(chip, reg);
>  }
>  
> -#define ES18XX_SINGLE(xname, xindex, reg, shift, mask, invert) \
> +#define ES18XX_SINGLE(xname, xindex, reg, shift, mask, flags) \
>  { .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, .index = xindex, \
>    .info = snd_es18xx_info_single, \
>    .get = snd_es18xx_get_single, .put = snd_es18xx_put_single, \
> -  .private_value = reg | (shift << 8) | (mask << 16) | (invert << 24) }
> +  .private_value = reg | (shift << 8) | (mask << 16) | (flags << 24) }
> +
> +#define ES18XX_FL_INVERT	(1 << 0)
> +#define ES18XX_FL_PMPORT	(1 << 1)
>  
>  static int snd_es18xx_info_single(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_info *uinfo)
>  {
> @@ -1159,10 +1163,14 @@ static int snd_es18xx_get_single(struct snd_kcontrol *kcontrol, struct snd_ctl_e
>  	int reg = kcontrol->private_value & 0xff;
>  	int shift = (kcontrol->private_value >> 8) & 0xff;
>  	int mask = (kcontrol->private_value >> 16) & 0xff;
> -	int invert = (kcontrol->private_value >> 24) & 0xff;
> +	int invert = (kcontrol->private_value >> 24) & ES18XX_FL_INVERT;
> +	int pm_port = (kcontrol->private_value >> 24) & ES18XX_FL_PMPORT;
>  	int val;
> -	
> -	val = snd_es18xx_reg_read(chip, reg);
> +
> +	if (pm_port)
> +		val = inb(chip->port + ES18XX_PM);
> +	else
> +		val = snd_es18xx_reg_read(chip, reg);
>  	ucontrol->value.integer.value[0] = (val >> shift) & mask;
>  	if (invert)
>  		ucontrol->value.integer.value[0] = mask - ucontrol->value.integer.value[0];
> @@ -1175,7 +1183,8 @@ static int snd_es18xx_put_single(struct snd_kcontrol *kcontrol, struct snd_ctl_e
>  	int reg = kcontrol->private_value & 0xff;
>  	int shift = (kcontrol->private_value >> 8) & 0xff;
>  	int mask = (kcontrol->private_value >> 16) & 0xff;
> -	int invert = (kcontrol->private_value >> 24) & 0xff;
> +	int invert = (kcontrol->private_value >> 24) & ES18XX_FL_INVERT;
> +	int pm_port = (kcontrol->private_value >> 24) & ES18XX_FL_PMPORT;
>  	unsigned char val;
>  	
>  	val = (ucontrol->value.integer.value[0] & mask);
> @@ -1183,6 +1192,12 @@ static int snd_es18xx_put_single(struct snd_kcontrol *kcontrol, struct snd_ctl_e
>  		val = mask - val;
>  	mask <<= shift;
>  	val <<= shift;
> +	if (pm_port) {
> +		val = (inb(chip->port + ES18XX_PM) & ~mask) | val;
> +		outb(val, chip->port + ES18XX_PM);
> +		return 0;

A put callback is supposed to return 1 if the hardware is updated to
the given value, or return 0 if the hardware value was same.


thanks,

Takashi
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/