[PATCH v2 0/2] pinctrl: Intel Cherryview/Braswell support

[Mika Westerberg]

Hi,

This is second version of the patch series adding pinctrl/GPIO support
for Intel Braswell and Cherrryview. The previous version can be found here:

https://lkml.org/lkml/2014/10/27/118

I've dropped patches [2/4] and [3/4] as they are already applied to the
pinctrl tree.

Changes to the previous version:

[1/2] - Removed unnecessary cast and added Rafael's ACK.

[2/2] - Use Ohms instead of kOhms in pin configuration.
      - Change chv_config_set_pull() to be not so convoluted.
      - Remove locking when we just read single register. This is not needed.
      - Use BIT() instead of (1 << something)

Mika Westerberg (2):
  gpio / ACPI: Add knowledge about pin controllers to acpi_get_gpiod()
  pinctrl: Add Intel Cherryview/Braswell pin controller support

 drivers/gpio/gpiolib-acpi.c                |   62 +-
 drivers/pinctrl/intel/Kconfig              |   12 +
 drivers/pinctrl/intel/Makefile             |    1 +
 drivers/pinctrl/intel/pinctrl-cherryview.c | 1519 ++++++++++++++++++++++++++++
 4 files changed, 1591 insertions(+), 3 deletions(-)
 create mode 100644 drivers/pinctrl/intel/pinctrl-cherryview.c

-- 
2.1.1

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/