[PATCH 2/4] serial: 8250_pnp: Override pnp disable for no_console_suspend

[Peter Hurley]

When the kernel command line parameter, no_console_suspend, is used,
the console should continue to output console messages. For a serial
console, the serial core ensures that the device is not shutdown when
no_console_suspend is specified. However, the pnp bus subsequently
disables the device and no further output occurs.

When registering the 8250 port, override PNP_DISABLE if the serial
device is a console and consoles are not suspending. Restore the
PNP_DISABLE capability (if overriden) on device removal.

Signed-off-by: Peter Hurley <peter@xxxxxxxxxxxxxxxxxx>
---
 drivers/tty/serial/8250/8250_pnp.c | 45 ++++++++++++++++++++++++++++----------
 1 file changed, 34 insertions(+), 11 deletions(-)

diff --git a/drivers/tty/serial/8250/8250_pnp.c b/drivers/tty/serial/8250/8250_pnp.c
index 682a2fb..50b7c89 100644
--- a/drivers/tty/serial/8250/8250_pnp.c
+++ b/drivers/tty/serial/8250/8250_pnp.c
@@ -18,11 +18,17 @@
 #include <linux/kernel.h>
 #include <linux/serial_core.h>
 #include <linux/bitops.h>
+#include <linux/console.h>
 
 #include <asm/byteorder.h>
 
 #include "8250.h"
 
+struct serial_pnp_info {
+	int line;
+	bool override_disable;
+};
+
 #define UNKNOWN_DEV 0x3000
 #define CIR_PORT	0x0800
 
@@ -426,7 +432,8 @@ static int serial_pnp_guess_board(struct pnp_dev *dev)
 static int
 serial_pnp_probe(struct pnp_dev *dev, const struct pnp_device_id *dev_id)
 {
-	struct uart_8250_port uart;
+	struct uart_8250_port uart, *port8250;
+	struct serial_pnp_info *info;
 	int ret, line, flags = dev_id->driver_data;
 
 	if (flags & UNKNOWN_DEV) {
@@ -435,6 +442,10 @@ serial_pnp_probe(struct pnp_dev *dev, const struct pnp_device_id *dev_id)
 			return ret;
 	}
 
+	info = devm_kzalloc(&dev->dev, sizeof(*info), GFP_KERNEL);
+	if (!info)
+		return -ENOMEM;
+
 	memset(&uart, 0, sizeof(uart));
 	if (pnp_irq_valid(dev, 0))
 		uart.port.irq = pnp_irq(dev, 0);
@@ -471,35 +482,47 @@ serial_pnp_probe(struct pnp_dev *dev, const struct pnp_device_id *dev_id)
 	if (line < 0 || (flags & CIR_PORT))
 		return -ENODEV;
 
-	pnp_set_drvdata(dev, (void *)((long)line + 1));
+	info->line = line;
+	port8250 = serial8250_get_port(line);
+
+	if (uart_console(&port8250->port) && !console_suspend_enabled) {
+		info->override_disable = !!(dev->capabilities & PNP_DISABLE);
+		dev->capabilities &= ~PNP_DISABLE;
+	}
+
+	pnp_set_drvdata(dev, info);
 	return 0;
 }
 
 static void serial_pnp_remove(struct pnp_dev *dev)
 {
-	long line = (long)pnp_get_drvdata(dev);
-	if (line)
-		serial8250_unregister_port(line - 1);
+	struct serial_pnp_info *info = pnp_get_drvdata(dev);
+
+	if (info) {
+		serial8250_unregister_port(info->line);
+		if (info->override_disable)
+			dev->capabilities |= PNP_DISABLE;
+	}
 }
 
 #ifdef CONFIG_PM
 static int serial_pnp_suspend(struct pnp_dev *dev, pm_message_t state)
 {
-	long line = (long)pnp_get_drvdata(dev);
+	struct serial_pnp_info *info = pnp_get_drvdata(dev);
 
-	if (!line)
+	if (!info)
 		return -ENODEV;
-	serial8250_suspend_port(line - 1);
+	serial8250_suspend_port(info->line);
 	return 0;
 }
 
 static int serial_pnp_resume(struct pnp_dev *dev)
 {
-	long line = (long)pnp_get_drvdata(dev);
+	struct serial_pnp_info *info = pnp_get_drvdata(dev);
 
-	if (!line)
+	if (!info)
 		return -ENODEV;
-	serial8250_resume_port(line - 1);
+	serial8250_resume_port(info->line);
 	return 0;
 }
 #else
-- 
2.1.3

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/