Re: [PATCH] PCI: Do not enable async suspend for JMicron chips

[Barto]

this patch solves these 2 bug reports :

https://bugzilla.kernel.org/show_bug.cgi?id=84861

https://bugzilla.kernel.org/show_bug.cgi?id=81551

in simple words : JMicron IDE/Sata controlers family ( JMBxxx ) are not
fully compatible with async_suspend feature, when a user tries to put
his PC on standby mode then at wake-up JMicron IDE/Sata controlers will
not work, because of a brother-relation between the SATA and IDE part on
this JMicron PCI card




Le 05/11/2014 19:01, Bjorn Helgaas a Ãcrit :
> On Tue, Nov 4, 2014 at 6:31 PM, Chuansheng Liu <chuansheng.liu@xxxxxxxxx> wrote:
>> The JMicron chip 361/363/368 contains one SATA controller and
>> one PATA controller, they are brother-relation ship in PCI tree,
>> but for powering on these both controller, we must follow the
>> sequence one by one, otherwise one of them can not be powered on
>> successfully.
> 
> This should mention what's broken and what problem a user would see.
> This changelog sounds a lot like the one for e6b7e41cdd8c, so I don't
> know if this is for a new, related problem, or what.
> 
>> So here we disable the async suspend method for Jmicron chip.
>>
>> Bug link:
>> https://bugzilla.kernel.org/show_bug.cgi?id=81551
>> https://bugzilla.kernel.org/show_bug.cgi?id=84861
>>
>> And we can revert the below commit after this patch is applied:
>> e6b7e41(ata: Disabling the async PM for JMicron chip 363/361)
>>
>> Cc: stable@xxxxxxxxxxxxxxx # 3.15+
>> Acked-by: Aaron Lu <aaron.lu@xxxxxxxxx>
>> Signed-off-by: Chuansheng Liu <chuansheng.liu@xxxxxxxxx>
>> ---
>>  drivers/pci/pci.c |   12 +++++++++++-
>>  1 file changed, 11 insertions(+), 1 deletion(-)
>>
>> diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
>> index 625a4ac..53128f0 100644
>> --- a/drivers/pci/pci.c
>> +++ b/drivers/pci/pci.c
>> @@ -2046,7 +2046,17 @@ void pci_pm_init(struct pci_dev *dev)
>>         pm_runtime_forbid(&dev->dev);
>>         pm_runtime_set_active(&dev->dev);
>>         pm_runtime_enable(&dev->dev);
>> -       device_enable_async_suspend(&dev->dev);
>> +
>> +       /*
>> +        * The JMicron chip 361/363/368 contains one SATA controller and
>> +        * one PATA controller, they are brother-relation ship in PCI tree,
>> +        * but for powering on these both controller, we must follow the
>> +        * sequence one by one, otherwise one of them can not be powered on
>> +        * successfully, so here we disable the async suspend method for
>> +        * Jmicron chip.
>> +        */
>> +       if (dev->vendor != PCI_VENDOR_ID_JMICRON)
>> +               device_enable_async_suspend(&dev->dev);
> 
> I don't like littering the core PCI code with vendor tests like this.
> This would be the only one, except for an ancient DECchip 21050 bridge
> erratum.
> 
> And why would we want a test for *all* JMicron devices here, when you
> claim the problem only affects a few specific ones?
> 
> And what's the story with the e6b7e41cdd8c ("ata: Disabling the async
> PM for JMicron chip 363/361") connection?  Is something broken even
> with e6b7e41cdd8c, and this is a better fix?  Or is this simply a
> different way of fixing the same problem?
> 
>>         dev->wakeup_prepared = false;
>>
>>         dev->pm_cap = 0;
>> --
>> 1.7.9.5
>>
> 
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/