Re: [PATCH] PCI: fix sriov enabling with virtual bus

[Bjorn Helgaas]

[+cc Chao, Joerg]

On Thu, Oct 30, 2014 at 11:09:13AM -0600, Bjorn Helgaas wrote:
> [+cc Rafael, linux-acpi]
> 
> On Wed, Oct 29, 2014 at 03:26:10PM -0700, Yinghai Lu wrote:
> > While enabling sriov for intel igb device got:
> > 
> > sca05-0a81fda5:~ # echo 7 > /sys/bus/pci/devices/0000\:09\:00.0/sriov_numvfs 
> > [  729.612191] pci 0000:0a:10.0: [8086:1520] type 00 class 0x020000
> > [  729.619002] BUG: unable to handle kernel NULL pointer dereference at 00000000000000e8
> > [  729.627767] IP: [<ffffffff815901cb>] pci_get_hp_params+0x5b/0x640
> > [  729.634593] PGD 0 
> > [  729.636844] Oops: 0000 [#1] SMP 
> > [  729.640466] Modules linked in:
> > ...
> > [  729.795268] Call Trace:
> > [  729.798007]  [<ffffffff81ea0843>] ? pci_mmcfg_read+0x123/0x140
> > [  729.804519]  [<ffffffff81ea0770>] ? pci_mmcfg_read+0x50/0x140
> > [  729.810942]  [<ffffffff815692a3>] pci_configure_device+0x33/0x350
> > [  729.817744]  [<ffffffff8156aba4>] pci_device_add+0x24/0x160
> > [  729.823965]  [<ffffffff8158f3bb>] pci_enable_sriov+0x4db/0x7d0
> > [  729.830486]  [<ffffffff81b63f54>] ? igb_pci_enable_sriov+0xe4/0x200
> > [  729.837481]  [<ffffffff81b63f7f>] igb_pci_enable_sriov+0x10f/0x200
> > [  729.844386]  [<ffffffff8155129c>] ? _kstrtoull+0x2c/0x80
> > [  729.850315]  [<ffffffff81b640a5>] igb_pci_sriov_configure+0x35/0x40
> > [  729.857318]  [<ffffffff815752b5>] sriov_numvfs_store+0xe5/0x140
> > [  729.863934]  [<ffffffff817e1f88>] dev_attr_store+0x18/0x30
> > [  729.870063]  [<ffffffff812624d8>] sysfs_kf_write+0x48/0x60
> > [  729.876186]  [<ffffffff812617ef>] ? kernfs_fop_write+0xaf/0x170
> > [  729.882797]  [<ffffffff81261827>] kernfs_fop_write+0xe7/0x170
> > [  729.889222]  [<ffffffff811ef66b>] vfs_write+0xcb/0x1c0
> > [  729.894958]  [<ffffffff811f0019>] SyS_write+0x49/0xb0
> > ...
> > [  729.943531] ---[ end trace 7cf0cdb66637665a ]---
> > 
> > and pci_get_hp_params+0x5b point to
> > 0xffffffff815901cb is in pci_get_hp_params (include/linux/device.h:815).
> > 810	#include <linux/pm_wakeup.h>
> > 811	
> > 812	static inline const char *dev_name(const struct device *dev)
> > 813	{
> > 814		/* Use the init name until the kobject becomes available */
> > 815		if (dev->init_name)
> > 816			return dev->init_name;
> > 817	
> > 818		return kobject_name(&dev->kobj);
> > 
> > The root cause:
> > Now pci_configure_device/pci_get_hp_params will be called for every pci_dev,
> > including VF that is under virtual bus. But virtual bus does not have bridge
> > set. So we can not refer pbus->self->dev directly.
> 
> This raises the question of what the correct behavior should be.  Your
> patch certainly avoids the NULL pointer dereference.  It does so by making
> acpi_pci_get_bridge_handle() fail gracefully, which means we will not look
> for _HPP/_HPX for VF devices.

I think I was mistaken about this.  A VF device might be on a virtual bus.
 And a virtual bus never has a bridge leading to it, i.e., its bus->self
pointer is NULL.  But I think a virtual bus always has a *parent* bus,
i.e., for a VF, dev->bus->parent is always valid.  This is because when
virtfn_add_bus() creates the virtual bus with "pci_add_new_bus(bus, NULL,
busnr)", the "bus" parameter (which becomes the parent bus of the virtual
bus) is a valid bus.

So with your patch, I think we *will* actually look for _HPP and _HPX for
VF devices, because we'll look for the handle of the bridge leading to the
virtual bus (which will return NULL), then for the handle of the bridge
leading to the virtual bus' parent bus, etc.

If you agree, Yinghai, I'll apply the patch below (same as what you posted,
with different changelog and a comment in the code).

The acpi_pci_get_bridge_handle(struct pci_bus *) interface niggles at me a
little because I don't think there's any concept of an ACPI device for a
PCI *bus*, so it doesn't seem like a very good fit to say "find the handle
for this bus".  But that's for later.

Bjorn



commit 32f638fc11db0526c706454d9ab4339d55ac89f3
Author: Yinghai Lu <yinghai@xxxxxxxxxx>
Date:   Thu Oct 30 10:17:25 2014 -0600

    PCI: Don't oops on virtual buses in acpi_pci_get_bridge_handle()
    
    acpi_pci_get_bridge_handle() returns the ACPI handle for the bridge device
    (either a host bridge or a PCI-to-PCI bridge) leading to a PCI bus.  But
    SR-IOV virtual functions can be on a virtual bus with no bridge leading to
    it.  Return a NULL acpi_handle in this case instead of trying to
    dereference the NULL pointer to the bridge.
    
    This fixes a NULL pointer dereference oops in pci_get_hp_params() when
    adding SR-IOV VF devices on virtual buses.
    
    [bhelgaas: changelog, add comment in code]
    Fixes: 6cd33649fa83 ("PCI: Add pci_configure_device() during enumeration")
    Link: https://bugzilla.kernel.org/show_bug.cgi?id=87591
    Reported-by: Chao Zhou <chao.zhou@xxxxxxxxx>
    Reported-by: Joerg Roedel <joro@xxxxxxxxxx>
    Signed-off-by: Yinghai Lu <yinghai@xxxxxxxxxx>
    Signed-off-by: Bjorn Helgaas <bhelgaas@xxxxxxxxxx>

diff --git a/include/linux/pci-acpi.h b/include/linux/pci-acpi.h
index 64dacb7288a6..24c7728ca681 100644
--- a/include/linux/pci-acpi.h
+++ b/include/linux/pci-acpi.h
@@ -41,8 +41,13 @@ static inline acpi_handle acpi_pci_get_bridge_handle(struct pci_bus *pbus)
 
 	if (pci_is_root_bus(pbus))
 		dev = pbus->bridge;
-	else
+	else {
+		/* If pbus is a virtual bus, there is no bridge to it */
+		if (!pbus->self)
+			return NULL;
+
 		dev = &pbus->self->dev;
+	}
 
 	return ACPI_HANDLE(dev);
 }
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/