Re: Possible regression with commit 52221610d

[Alexandre Courbot]

On 11/06/2014 12:27 AM, Tim Kryger wrote:
> On Wed, Nov 5, 2014 at 12:10 AM, Alexandre Courbot <acourbot@xxxxxxxxxx> wrote:
> > On 11/05/2014 12:31 AM, Tim Kryger wrote:
> > > On Tue, Nov 4, 2014 at 1:00 AM, Alexandre Courbot <acourbot@xxxxxxxxxx>
> > > wrote:
> > > > Hi Tim, thanks for your reply!
> > > >
> > > > On 11/04/2014 02:28 PM, Tim Kryger wrote:
> > > > > On Mon, Nov 3, 2014 at 7:05 PM, Alexandre Courbot <acourbot@xxxxxxxxxx>
> > > > > wrote:
> > > > > > Hi guys,
> > > > > >
> > > > > > On the NVIDIA shield (tegra114-roth) platform, I have noticed that MMC
> > > > > > stopped working completely on recent kernels. MMC devices will not show
> > > > > > up
> > > > > > and the message "mmc1: Controller never released inhibit bit(s)." shows
> > > > > > up
> > > > > > repeatedly in the console.
> > > > > >
> > > > > > After bisecting I tracked commit
> > > > > > 52221610dd84dc3e9196554f0292ca9e8ab3541d
> > > > > > ("mmc: sdhci: Improve external VDD regulator support") as the one that
> > > > > > introduced this issue, which seems somehow surprising to me since it
> > > > > > has
> > > > > > been around for a while and nobody else complained about this AFAICT.
> > > > >
> > > > >
> > > > >
> > > > > I'm not too familiar with the Nvidia Shield so can you please confirm
> > > > > the following?
> > > > >
> > > > > The controller in the Tegra114 is SDHCI compliant and as such
> > > > > sdhci_tegra_probe calls sdhci_add_host.  External regulators are
> > > > > sought in sdhci_add_host with a call to mmc_regulator_get_supply.
> > > >
> > > >
> > > >
> > > > This is correct.
> > > >
> > > > > Since no external regulators are specified in tegra114.dtsi or
> > > > > tegra114-roth.dts, mmc->supply.vmmc and mmc->supply.vqmmc are set to
> > > > > -ENODEV.
> > > >
> > > >
> > > >
> > > > Actually 2 of the MMC nodes in tegra114-roth.dts (for SD card and eMMC)
> > > > have
> > > > a vmmc-supply property, so for two of them at least mmc->supply.vmmc is a
> > > > valid pointer.
> > >
> > > I must have been looking at an old version of the file.  Thanks for
> > > clearing this up.
> > >
> > > > As explained above, vmmc is a valid pointer for 2 instances of the MMC
> > > > controller. Interestingly, if I just remove the "return" line in the
> > > > IS_ERR() block (without moving it around), the issue also seems to be
> > > > fixed.
> > > >
> > > > > Can you provide the relevant parts of the log before the problem occurs?
> > > >
> > > >
> > > >
> > > > There is not much unfortunately ; the only relevant log I have is this:
> > > >
> > > > [   12.246022] mmc2: Timeout waiting for hardware interrupt.
> > > > [   12.264990] mmc2: Controller never released inhibit bit(s).
> > > >
> > > > Some hardware interrupt timed out. I don't know much about the MMC
> > > > subsystem. but could it be because initially the controller is not in a
> > > > powered-on state, and that return statement causes the function to leave
> > > > it
> > > > unpowered?
> > >
> > >
> > > In a nutshell, the issue here is that the SDHCI spec demands that VMMC
> > > be supplied by the controller itself with the specific voltage
> > > configured using the SDHCI_POWER_CONTROL register but almost nobody
> > > does this.  Many SoCs omit this capability from their controllers and
> > > instead rely upon external regulators.  In such cases there isn't
> > > normally any need to update the voltage bits of the power control
> > > register.  It sounds like you are saying this isn't true for the
> > > Tegra114.
> >
> >
> > Thanks for your explanation, it makes sense now.
> >
> > Looking at other Tegra boards .dts I noticed that SHIELD is the only one
> > using a vmmc-supply. Maybe this is the part that is wrong? I wrote this DTS
> > and cannot exclude I misread the schematics. Maybe that regulator is used
> > for some other (still sdmmc-related) purpose but the actual power provider
> > is the controller itself.
> >
> > If you can confirm that the driver is performing as it should, I will look
> > in that direction and revise my DTS.
>
> I believe it is working as intended.  Is the schematic publicly available?

Sadly, no. But it is built similarly to other T114 boards, so I have to 
assume the error is mine here. I will come back to this thread if it 
turns out it is not.

Thanks for your help!
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/