Re: "asix: Don't reset PHY on if_up for ASIX 88772" breaks net on arndale platform
From: Riku Voipio
Date: Thu Nov 06 2014 - 04:07:21 EST
On Wed, Nov 05, 2014 at 03:02:58PM +0000, Charles Keepax wrote:
> On Wed, Nov 05, 2014 at 01:04:37PM +0100, Stam, Michel [FINT] wrote:
> > Hello Charles,
> >
> > After looking around I found the reset value for the 8772 chip, which
> > seems to be 0x1E1 (ANAR register).
> >
> > This equates to (according to include/uapi/linux/mii.h)
> > ADVERTISE_ALL | ADVERTISE_CSMA.
> >
> > The register only seems to become 0 if the software reset fails.
> Odd it definitely reads back as zero on Arndale. I am guessing
> that the root of the problem here is that for some reason Arndale
> POR of the ethernet is pants and it needs a full software reset
> before it will work and the patch removes the full reset
> callback.
The asix on arndale comes semi-configured from u-boot, which I guess is
not the state kernel expects it to come in. At least in my case where
I use tftp from u-boot to load my kernel.
So probably the full reset is needed here to make the asix chip come
to a truly pristine state.
The commit that Michel partially reverted (by returning to use
ax88772_link_reset instead of ax88772_reset), indicates that a strong reset
is needed for suspend/resume as well:
commit 4ad1438f025ed8d1e4e95a796ca7f0ad5a22c378
Author: Grant Grundler <grundler@xxxxxxxxxxxx>
Date: Tue Oct 4 09:55:16 2011 +0000
NET: fix phy init for AX88772 USB ethernet
Fix phy initialization for AX88772 (USB 2.0 100BT). Failure
was occasionally DHCP wouldn't work after reboot or
suspend/resume cycle.
> > Unfortunately, this is exactly what I get when the patch is applied;
> > asix 1-2:1.0 eth1: Failed to send software reset: ffffffb5
> > asix 1-2:1.0 eth1: link reset failed (-75) usbnet usb-0000:00:1d.0-2,
> > ASIX AX88772 USB 2.0 Ethernet
> > asix 1-2:1.0 eth1: Failed to send software reset: ffffffb5
> > asix 1-2:1.0 eth1: link reset failed (-75) usbnet usb-0000:00:1d.0-2,
> > ASIX AX88772 USB 2.0 Ethernet
>
> Ok so I am guessing you have a value in the register which is
> neither the reset value or 0 and this causing problems later in
> the reset/on the next reset. I do find the naming confusing in
> the error message there as it says link reset failed but the
> link_reset callback can't fail in the driver and I modified the
> reset callback. But I guess that is just oddities of the network
> stack I am not familiar with.
>
> The other thing that feels odd is (and again apologies as I know
> next to nothing about the networking stack) how come it is
> unexpected that the reset callback destroys the state of the
> device. Naively I would have expected that a reset callback would
> reset the device back to its default state. Here we seem to be
> trying to avoid that happening.
Indeed, it would seems some tracing would be neede to figure out in
which order the .reset and .link_reset callbacks are being called.
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/