[PATCH 2/5] regulator: rt5033: Add RT5033 Regulator device driver
From: Beomho Seo
Date: Thu Nov 06 2014 - 21:53:35 EST
This patch add device driver of Richtek RT5033 PMIC.
The driver support multiple regulator like LDO and synchronous Buck.
The integrated synchronous buck converter is designed to provide 0.6 A
application with high efficiency. Two LDOs are integrated. One safe LDO is
for 60mA and the other one LDO is for 150 mA.
Cc: Liam Girdwood <lgirdwood@xxxxxxxxx>
Cc: Mark Brown <broonie@xxxxxxxxxx>
Signed-off-by: Beomho Seo <beomho.seo@xxxxxxxxxxx>
Acked-by: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
---
drivers/regulator/Kconfig | 8 ++
drivers/regulator/Makefile | 1 +
drivers/regulator/rt5033-regulator.c | 154 ++++++++++++++++++++++++++++++++++
3 files changed, 163 insertions(+)
create mode 100644 drivers/regulator/rt5033-regulator.c
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index 55d7b7b..8558e1b 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -521,6 +521,14 @@ config REGULATOR_RN5T618
help
Say y here to support the regulators found on Ricoh RN5T618 PMIC.
+config REGULATOR_RT5033
+ tristate "Richtek RT5033 Regulators"
+ depends on MFD_RT5033
+ help
+ This adds support for voltage and current regulators in Richtek
+ RT5033 PMIC. The device supports multiple regulators like
+ current source, LDO and Buck.
+
config REGULATOR_S2MPA01
tristate "Samsung S2MPA01 voltage regulator"
depends on MFD_SEC_CORE
diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
index 1029ed3..1f28ebf 100644
--- a/drivers/regulator/Makefile
+++ b/drivers/regulator/Makefile
@@ -69,6 +69,7 @@ obj-$(CONFIG_REGULATOR_PCF50633) += pcf50633-regulator.o
obj-$(CONFIG_REGULATOR_RC5T583) += rc5t583-regulator.o
obj-$(CONFIG_REGULATOR_RK808) += rk808-regulator.o
obj-$(CONFIG_REGULATOR_RN5T618) += rn5t618-regulator.o
+obj-$(CONFIG_REGULATOR_RT5033) += rt5033-regulator.o
obj-$(CONFIG_REGULATOR_S2MPA01) += s2mpa01.o
obj-$(CONFIG_REGULATOR_S2MPS11) += s2mps11.o
obj-$(CONFIG_REGULATOR_S5M8767) += s5m8767.o
diff --git a/drivers/regulator/rt5033-regulator.c b/drivers/regulator/rt5033-regulator.c
new file mode 100644
index 0000000..87571d8
--- /dev/null
+++ b/drivers/regulator/rt5033-regulator.c
@@ -0,0 +1,154 @@
+/*
+ * Regulator driver for the Richtek RT5033
+ *
+ * Copyright (C) 2014 Samsung Electronics, Co., Ltd.
+ * Beomho Seo <beomho.seo@xxxxxxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published bythe Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/driver.h>
+#include <linux/mfd/rt5033.h>
+#include <linux/mfd/rt5033-private.h>
+#include <linux/regulator/of_regulator.h>
+
+static struct regulator_ops rt5033_safe_ldo_ops = {
+ .is_enabled = regulator_is_enabled_regmap,
+ .enable = regulator_enable_regmap,
+ .disable = regulator_disable_regmap,
+ .list_voltage = regulator_list_voltage_linear,
+};
+
+static struct regulator_ops rt5033_buck_ops = {
+ .is_enabled = regulator_is_enabled_regmap,
+ .enable = regulator_enable_regmap,
+ .disable = regulator_disable_regmap,
+ .list_voltage = regulator_list_voltage_linear,
+ .map_voltage = regulator_map_voltage_linear,
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
+};
+
+static const struct regulator_desc rt5033_supported_regulators[] = {
+ [RT5033_BUCK] = {
+ .name = "BUCK",
+ .id = RT5033_BUCK,
+ .ops = &rt5033_buck_ops,
+ .type = REGULATOR_VOLTAGE,
+ .owner = THIS_MODULE,
+ .n_voltages = RT5033_REGULATOR_BUCK_VOLTAGE_STEP_NUM,
+ .min_uV = RT5033_REGULATOR_BUCK_VOLTAGE_MIN,
+ .uV_step = RT5033_REGULATOR_BUCK_VOLTAGE_STEP,
+ .enable_reg = RT5033_REG_CTRL,
+ .enable_mask = RT5033_CTRL_EN_BUCK_MASK,
+ .vsel_reg = RT5033_REG_BUCK_CTRL,
+ .vsel_mask = RT5033_BUCK_CTRL_MASK,
+ },
+ [RT5033_LDO] = {
+ .name = "LDO",
+ .id = RT5033_LDO,
+ .ops = &rt5033_buck_ops,
+ .type = REGULATOR_VOLTAGE,
+ .owner = THIS_MODULE,
+ .n_voltages = RT5033_REGULATOR_LDO_VOLTAGE_STEP_NUM,
+ .min_uV = RT5033_REGULATOR_LDO_VOLTAGE_MIN,
+ .uV_step = RT5033_REGULATOR_LDO_VOLTAGE_STEP,
+ .enable_reg = RT5033_REG_CTRL,
+ .enable_mask = RT5033_CTRL_EN_LDO_MASK,
+ .vsel_reg = RT5033_REG_LDO_CTRL,
+ .vsel_mask = RT5033_LDO_CTRL_MASK,
+ },
+ [RT5033_SAFE_LDO] = {
+ .name = "SAFE_LDO",
+ .id = RT5033_SAFE_LDO,
+ .ops = &rt5033_safe_ldo_ops,
+ .type = REGULATOR_VOLTAGE,
+ .owner = THIS_MODULE,
+ .n_voltages = 1,
+ .min_uV = RT5033_REGULATOR_SAFE_LDO_VOLTAGE,
+ .enable_reg = RT5033_REG_CTRL,
+ .enable_mask = RT5033_CTRL_EN_SAFE_LDO_MASK,
+ },
+};
+
+static struct of_regulator_match rt5033_regulator_matches[] = {
+ { .name = "BUCK", },
+ { .name = "LDO", },
+ { .name = "SAFE_LDO", },
+};
+
+static int rt5033_regulator_dt_parse_data(struct device *dev)
+{
+ int ret;
+ struct device_node *np;
+
+ np = of_get_child_by_name(dev->parent->of_node, "regulators");
+ if (!np) {
+ dev_err(dev, "Failed to get child node for regulators\n");
+ return -EINVAL;
+ }
+
+ ret = of_regulator_match(dev, np, rt5033_regulator_matches,
+ ARRAY_SIZE(rt5033_regulator_matches));
+ if (ret < 0)
+ return ret;
+
+ return ret;
+}
+
+static int rt5033_regulator_probe(struct platform_device *pdev)
+{
+ struct rt5033_dev *rt5033 = dev_get_drvdata(pdev->dev.parent);
+ int ret, i;
+ struct regulator_config config = {};
+
+ ret = rt5033_regulator_dt_parse_data(&pdev->dev);
+ if (ret < 0)
+ return ret;
+
+ config.dev = &pdev->dev;
+ config.driver_data = rt5033;
+
+ for (i = 0; i < ARRAY_SIZE(rt5033_supported_regulators); i++) {
+ struct regulator_dev *regulator;
+
+ config.init_data = rt5033_regulator_matches[i].init_data;
+ config.of_node = rt5033_regulator_matches[i].of_node;
+ config.regmap = rt5033->regmap;
+
+ regulator = devm_regulator_register(&pdev->dev,
+ &rt5033_supported_regulators[i], &config);
+ if (IS_ERR(regulator)) {
+ ret = PTR_ERR(regulator);
+ dev_err(&pdev->dev,
+ "Regulator init failed %d: with error: %d\n",
+ i, ret);
+ return ret;
+ }
+ }
+
+ return 0;
+}
+
+static const struct platform_device_id rt5033_regulator_id[] = {
+ { "rt5033-regulator", },
+ { }
+};
+MODULE_DEVICE_TABLE(platform, rt5033_regulator_id);
+
+static struct platform_driver rt5033_regulator_driver = {
+ .driver = {
+ .name = "rt5033-regulator",
+ },
+ .probe = rt5033_regulator_probe,
+ .id_table = rt5033_regulator_id,
+};
+module_platform_driver(rt5033_regulator_driver);
+
+MODULE_DESCRIPTION("Richtek RT5033 Regulator driver");
+MODULE_AUTHOR("Beomho Seo <beomho.seo@xxxxxxxxxxx>");
+MODULE_LICENSE("GPL");
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/