Re: [PATCH] staging: slicoss.c: checkpatch warnings

[Jaime Arrocha]

Thanks for the feedback. I'll pay more attention.

On Thu, Nov 6, 2014 at 8:48 PM, Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx> wrote:
> On Thu, Nov 06, 2014 at 06:57:27PM -0600, Jaime Arrocha wrote:
>> Correction of warnings of lines with 80 plus character.
>> The rest were left for better code readability
>>
>> Signed-off-by: Jaime Arrocha <jarrocha27@xxxxxxxxx>
>> ---
>>  drivers/staging/slicoss/slicoss.c | 27 ++++++++++++++++-----------
>>  1 file changed, 16 insertions(+), 11 deletions(-)
>>
>> diff --git a/drivers/staging/slicoss/slicoss.c b/drivers/staging/slicoss/slicoss.c
>> index cff7cbe..d65fa92 100644
>> --- a/drivers/staging/slicoss/slicoss.c
>> +++ b/drivers/staging/slicoss/slicoss.c
>> @@ -99,8 +99,8 @@
>>  #include "slic.h"
>>
>>  static uint slic_first_init = 1;
>> -static char *slic_banner = "Alacritech SLIC Technology(tm) Server "
>> -             "and Storage Accelerator (Non-Accelerated)";
>> +char *slic_banner = "Alacritech SLIC Technology(tm) Server and "
>> +                     "Storage Accelerator (Non-Accelerated)";
>
> Why did you take away the 'static' marking here?  And make this one full
> line please.
>
>
>
>>
>>  static char *slic_proc_version = "2.0.351  2006/07/14 12:26:00";
>>
>> @@ -498,12 +498,14 @@ static int slic_card_download(struct adapter *adapter)
>>                       slic_reg32_write(&slic_regs->slic_wcs,
>>                                        baseaddress + codeaddr, FLUSH);
>>                       /* Write out instruction to low addr */
>> -                     slic_reg32_write(&slic_regs->slic_wcs, instruction, FLUSH);
>> +                     slic_reg32_write(&slic_regs->slic_wcs,
>> +                                      instruction, FLUSH);
>>                       instruction = *(u32 *)(fw->data + index);
>>                       index += 4;
>>
>>                       /* Write out instruction to high addr */
>> -                     slic_reg32_write(&slic_regs->slic_wcs, instruction, FLUSH);
>> +                     slic_reg32_write(&slic_regs->slic_wcs,
>> +                                      instruction, FLUSH);
>>                       instruction = *(u32 *)(fw->data + index);
>>                       index += 4;
>>               }
>> @@ -1884,7 +1886,8 @@ static void slic_xmit_fail(struct adapter *adapter,
>>                       break;
>>               case XMIT_FAIL_HOSTCMD_FAIL:
>>                       dev_err(&adapter->netdev->dev,
>> -                             "xmit_start skb[%p] type[%x] No host commands available\n", skb, skb->pkt_type);
>> +                             "xmit_start skb[%p] type[%x] No host commands available\n",
>> +                             skb, skb->pkt_type);
>>                       break;
>>               }
>>       }
>> @@ -2096,11 +2099,10 @@ static void slic_interrupt_card_up(u32 isr, struct adapter *adapter,
>>                               }
>>                       } else if (isr & ISR_XDROP) {
>>                               dev_err(&dev->dev,
>> -                                             "isr & ISR_ERR [%x] ISR_XDROP\n", isr);
>> +                                     "isr & ISR_ERR [%x] ISR_XDROP\n", isr);
>>                       } else {
>>                               dev_err(&dev->dev,
>> -                                             "isr & ISR_ERR [%x]\n",
>> -                                             isr);
>> +                                     "isr & ISR_ERR [%x]\n", isr);
>>                       }
>>               }
>>
>> @@ -2340,7 +2342,8 @@ static int slic_if_init(struct adapter *adapter)
>>                                SLIC_GET_ADDR_LOW(&pshmem->isr), FLUSH);
>>  #else
>>               slic_reg32_write(&slic_regs->slic_addr_upper, 0, DONT_FLUSH);
>> -             slic_reg32_write(&slic_regs->slic_isp, (u32)&pshmem->isr, FLUSH);
>> +             slic_reg32_write(&slic_regs->slic_isp,
>> +                              (u32)&pshmem->isr, FLUSH);
>>  #endif
>>               spin_unlock_irqrestore(&adapter->bit64reglock.lock,
>>                                       adapter->bit64reglock.flags);
>> @@ -2555,7 +2558,8 @@ static int slic_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
>>
>>                       if (copy_from_user(data, rq->ifr_data, 28)) {
>>                               PRINT_ERROR
>> -                                 ("slic: copy_from_user FAILED getting initial simba param\n");
>> +                                 ("slic: copy_from_user FAILED getting"
>> +                                  " initial simba param\n");
>
> Never break a string across a line.
>
>>                               return -EFAULT;
>>                       }
>>
>> @@ -2570,7 +2574,8 @@ static int slic_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
>>                                  (tracemon_request ==
>>                                   SLIC_DUMP_IN_PROGRESS)) {
>>                               PRINT_ERROR
>> -                                 ("ATK Diagnostic Trace Dump Requested but already in progress... ignore\n");
>> +                                 ("ATK Diagnostic Trace Dump Requested"
>> +                                  " but already in progress... ignore\n");
>
> Same here, never do this.
>
> If you fix up the PRINT_ERROR() macros, you will not get checkpatch
> warnings.  But that's not a real issue, this driver has so many other
> problems...
>
> thanks,
>
> greg k-h
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/