[PATCH v7 5/5] ARM: dts: add suspend voltage setting for RK808

[Chris Zhong]

global_pwroff would be pull to high when RK3288 entering suspend,
this pin is a sleep signal for RK808, so RK808 could goto sleep
mode, and some regulators would be disable.

Signed-off-by: Chris Zhong <zyw@xxxxxxxxxxxxxx>

---

Changes in v7:
- add regulator-state-mem sub node for suspend

Changes in v6: None
Changes in v5: None
Changes in v4: None
Changes in v3: None
Changes in v2: None

 arch/arm/boot/dts/rk3288-evb-rk808.dts | 46 +++++++++++++++++++++++++++++++++-
 1 file changed, 45 insertions(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/rk3288-evb-rk808.dts b/arch/arm/boot/dts/rk3288-evb-rk808.dts
index d8c775e6..6145cf4 100644
--- a/arch/arm/boot/dts/rk3288-evb-rk808.dts
+++ b/arch/arm/boot/dts/rk3288-evb-rk808.dts
@@ -31,7 +31,7 @@
 		interrupt-parent = <&gpio0>;
 		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
 		pinctrl-names = "default";
-		pinctrl-0 = <&pmic_int>;
+		pinctrl-0 = <&pmic_int &global_pwroff>;
 		rockchip,system-power-controller;
 		wakeup-source;
 		#clock-cells = <1>;
@@ -50,6 +50,9 @@
 				regulator-min-microvolt = <750000>;
 				regulator-max-microvolt = <1350000>;
 				regulator-name = "vdd_arm";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
 			};
 
 			vdd_gpu: DCDC_REG2 {
@@ -58,12 +61,19 @@
 				regulator-min-microvolt = <850000>;
 				regulator-max-microvolt = <1250000>;
 				regulator-name = "vdd_gpu";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
 			};
 
 			vcc_ddr: DCDC_REG3 {
 				regulator-always-on;
 				regulator-boot-on;
 				regulator-name = "vcc_ddr";
+				regulator-suspend-mem-enabled;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
 			};
 
 			vcc_io: DCDC_REG4 {
@@ -72,6 +82,9 @@
 				regulator-min-microvolt = <3300000>;
 				regulator-max-microvolt = <3300000>;
 				regulator-name = "vcc_io";
+				regulator-state-mem {
+					regulator-suspend-microvolt = <3300000>;
+				};
 			};
 
 			vccio_pmu: LDO_REG1 {
@@ -80,6 +93,9 @@
 				regulator-min-microvolt = <3300000>;
 				regulator-max-microvolt = <3300000>;
 				regulator-name = "vccio_pmu";
+				regulator-state-mem {
+					regulator-suspend-microvolt = <3300000>;
+				};
 			};
 
 			vcc_tp: LDO_REG2 {
@@ -88,6 +104,9 @@
 				regulator-min-microvolt = <3300000>;
 				regulator-max-microvolt = <3300000>;
 				regulator-name = "vcc_tp";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
 			};
 
 			vdd_10: LDO_REG3 {
@@ -96,6 +115,9 @@
 				regulator-min-microvolt = <1000000>;
 				regulator-max-microvolt = <1000000>;
 				regulator-name = "vdd_10";
+				regulator-state-mem {
+					regulator-suspend-microvolt = <1000000>;
+				};
 			};
 
 			vcc18_lcd: LDO_REG4 {
@@ -104,6 +126,9 @@
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
 				regulator-name = "vcc18_lcd";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
 			};
 
 			vccio_sd: LDO_REG5 {
@@ -112,6 +137,9 @@
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <3300000>;
 				regulator-name = "vccio_sd";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
 			};
 
 			vdd10_lcd: LDO_REG6 {
@@ -120,6 +148,9 @@
 				regulator-min-microvolt = <1000000>;
 				regulator-max-microvolt = <1000000>;
 				regulator-name = "vdd10_lcd";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
 			};
 
 			vcc_18: LDO_REG7 {
@@ -128,6 +159,10 @@
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
 				regulator-name = "vcc_18";
+				regulator-suspend-mem-microvolt = <1800000>;
+				regulator-state-mem {
+					regulator-suspend-microvolt = <1800000>;
+				};
 			};
 
 			vcca_codec: LDO_REG8 {
@@ -136,18 +171,27 @@
 				regulator-min-microvolt = <3300000>;
 				regulator-max-microvolt = <3300000>;
 				regulator-name = "vcca_codec";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
 			};
 
 			vcc_wl: SWITCH_REG1 {
 				regulator-always-on;
 				regulator-boot-on;
 				regulator-name = "vcc_wl";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
 			};
 
 			vcc_lcd: SWITCH_REG2 {
 				regulator-always-on;
 				regulator-boot-on;
 				regulator-name = "vcc_lcd";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
 			};
 		};
 	};
-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/