Re: [PATCH v2 2/6] drivers: soc: Add support for Exynos PMU driver

From: Pankaj Dubey
Date: Sat Nov 08 2014 - 12:16:12 EST


Hi Amit,

On 8 November 2014 18:46, Amit Daniel Kachhap <amit.daniel@xxxxxxxxxxx> wrote:
> This patch moves Exynos PMU driver implementation from "arm/mach-exynos"
> to "drivers/soc/samsung". This driver is mainly used for setting misc bits of
> register from PMU IP of Exynos SoC which will be required to configure
> before Suspend/Resume. Currently all these settings are done in
> "arch/arm/mach-exynos/pmu.c" but moving ahead for ARM64 based SoC
> support,there is a need of DT based implementation of PMU driver.
>
> This driver uses already existing DT binding information.
>
> Signed-off-by: Pankaj Dubey <pankaj.dubey@xxxxxxxxxxx>
> Signed-off-by: Amit Daniel Kachhap <amit.daniel@xxxxxxxxxxx>
> ---
> arch/arm/mach-exynos/Makefile | 2 +-
> drivers/soc/Kconfig | 1 +
> drivers/soc/Makefile | 1 +
> drivers/soc/samsung/Kconfig | 19 +++++++++++++++++++
> drivers/soc/samsung/Makefile | 1 +
> .../pmu.c => drivers/soc/samsung/exynos-pmu.c | 0
> 6 files changed, 23 insertions(+), 1 deletion(-)
> create mode 100644 drivers/soc/samsung/Kconfig
> create mode 100644 drivers/soc/samsung/Makefile
> rename arch/arm/mach-exynos/pmu.c => drivers/soc/samsung/exynos-pmu.c (100%)
>
> diff --git a/arch/arm/mach-exynos/Makefile b/arch/arm/mach-exynos/Makefile
> index bcefb54..b91b382 100644
> --- a/arch/arm/mach-exynos/Makefile
> +++ b/arch/arm/mach-exynos/Makefile
> @@ -9,7 +9,7 @@ ccflags-$(CONFIG_ARCH_MULTIPLATFORM) += -I$(srctree)/$(src)/include -I$(srctree)
>
> # Core
>
> -obj-$(CONFIG_ARCH_EXYNOS) += exynos.o pmu.o exynos-smc.o firmware.o
> +obj-$(CONFIG_ARCH_EXYNOS) += exynos.o exynos-smc.o firmware.o
>
> obj-$(CONFIG_EXYNOS_CPU_SUSPEND) += pm.o sleep.o
> obj-$(CONFIG_PM_SLEEP) += suspend.o
> diff --git a/drivers/soc/Kconfig b/drivers/soc/Kconfig
> index 76d6bd4..90f33b9 100644
> --- a/drivers/soc/Kconfig
> +++ b/drivers/soc/Kconfig
> @@ -3,5 +3,6 @@ menu "SOC (System On Chip) specific Drivers"
> source "drivers/soc/qcom/Kconfig"
> source "drivers/soc/ti/Kconfig"
> source "drivers/soc/versatile/Kconfig"
> +source "drivers/soc/samsung/Kconfig"
>
> endmenu
> diff --git a/drivers/soc/Makefile b/drivers/soc/Makefile
> index 063113d..44d220d 100644
> --- a/drivers/soc/Makefile
> +++ b/drivers/soc/Makefile
> @@ -6,3 +6,4 @@ obj-$(CONFIG_ARCH_QCOM) += qcom/
> obj-$(CONFIG_ARCH_TEGRA) += tegra/
> obj-$(CONFIG_SOC_TI) += ti/
> obj-$(CONFIG_PLAT_VERSATILE) += versatile/
> +obj-$(CONFIG_ARCH_EXYNOS) += samsung/
> diff --git a/drivers/soc/samsung/Kconfig b/drivers/soc/samsung/Kconfig
> new file mode 100644
> index 0000000..beb6dfc
> --- /dev/null
> +++ b/drivers/soc/samsung/Kconfig
> @@ -0,0 +1,19 @@
> +#
> +# SAMSUNG SOC drivers
> +#
> +menuconfig SOC_SAMSUNG
> + bool "Samsung SOC drivers support"
> +
> +if SOC_SAMSUNG
> +
> +config MFD_EXYNOS_PMU

MFD_EXYNOS_PMU? I think it should be only EXYNOS_PMU,
as we are moving here in drivers/soc giving reason as it does not fit
into MFD.

> + tristate "Support Exynos Power Management Unit"

I think this config should not be user visible config option, as I remember
same was pointed out by Tomasz some times back.

> + depends on ARM || ARM64

How about only making depends on ARCH_EXYNOS?

> + default y
> + help
> + Exynos SoC have Power Management Unit (PMU) which controls power and
> + operation state of Exynos SoC in two different ways. This driver
> + provides implementation of PMU driver and provides basic functionality
> + required during these operation state.
> +
> +endif #SOC_SAMSUNG
> diff --git a/drivers/soc/samsung/Makefile b/drivers/soc/samsung/Makefile
> new file mode 100644
> index 0000000..9d30f61
> --- /dev/null
> +++ b/drivers/soc/samsung/Makefile
> @@ -0,0 +1 @@
> +obj-$(CONFIG_MFD_EXYNOS_PMU) += exynos-pmu.o
> diff --git a/arch/arm/mach-exynos/pmu.c b/drivers/soc/samsung/exynos-pmu.c
> similarity index 100%
> rename from arch/arm/mach-exynos/pmu.c
> rename to drivers/soc/samsung/exynos-pmu.c
> --
> 1.7.9.5
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/