Re: [PATCH v1 0/3] Transition pxa25x clock to common clocks

[Robert Jarzmik]

 Dmitry Eremin-Solenikov <dbaryshkov@xxxxxxxxx> writes:

> 2014-11-08 20:26 GMT+03:00 Robert Jarzmik <robert.jarzmik@xxxxxxx>:
>> Dmitry Eremin-Solenikov <dbaryshkov@xxxxxxxxx> writes:
>>
>>> Hello,
>>> Tested in qemu (pxa25x target).
>>>
>>> 2) sa1100-rtc could not find a clock and thus failed to be probed.
>>> 4) Got an issue with IrDA driver - it gets -ENODEV for UARTCLK clock
>>
>> Hi Dmitry,
>>
>> Would you mind retesting with the patch in [1] applied to see if points 2 and 4
>> are fixed ? Alternatively you can refetch from the github tree, I included that
>> incremental patch there too.
>>
>> If it works correctly for you, could I have your Tested-by ? If not, tell me and
>> I'll try to figure out what's wrong.
>
> Tested in qemu, everything works fine. I will test on the real hardware
> tomorow.
Aha, the test.
Would you at that time do a "cat /sys/kernel/debug/clk/clk_summary" and send it
to me please ?

>
> BTW: It looks like pxa27x also shows the same behaviour wrt. sa1100-rtc and
> pxa2xx-ir (after reverting a revert).
Ah yes, you're very right about that.

Same as before, github updated and patch included in this mail.

Cheers.

-- 
Robert