[PATCH] AHCI: Add generic MSI-X interrupt support to SATA PCI driver

[Robert Richter]

From: Sunil Goutham <sgoutham@xxxxxxxxxx>

This patch adds generic support for MSI-X interrupts to the SATA PCI
driver. Only single interrupt support is implemented. Thus, per-port
interrupts can not yet be enabled.

The driver now checks the device for the existence of MSI-X and tries
to enable the interrupt. Otherwise, if a device is not MSI-X capable,
the initialization is skipped and MSI or intx interrupts are
configured.

This patch also enables AHCI for Cavium Thunder SoCs that uses MSI-X.

Signed-off-by: Sunil Goutham <sgoutham@xxxxxxxxxx>
Signed-off-by: Robert Richter <rrichter@xxxxxxxxxx>
---
 arch/arm64/Kconfig |  1 +
 drivers/ata/ahci.c | 40 +++++++++++++++++++++++++++++++++++++++-
 2 files changed, 40 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
index ac9afde76dea..55970474d3ae 100644
--- a/arch/arm64/Kconfig
+++ b/arch/arm64/Kconfig
@@ -145,6 +145,7 @@ config ARCH_THUNDER
 	bool "Cavium Inc. Thunder SoC Family"
 	help
 	  This enables support for Cavium's Thunder Family of SoCs.
+	select SATA_AHCI
 
 config ARCH_VEXPRESS
 	bool "ARMv8 software model (Versatile Express)"
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index 5f039f191067..8e43ccb72c95 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -52,6 +52,7 @@
 
 enum {
 	AHCI_PCI_BAR_STA2X11	= 0,
+	AHCI_PCI_BAR_CAVIUM	= 0,
 	AHCI_PCI_BAR_ENMOTUS	= 2,
 	AHCI_PCI_BAR_STANDARD	= 5,
 };
@@ -483,6 +484,9 @@ static const struct pci_device_id ahci_pci_tbl[] = {
 	/* Enmotus */
 	{ PCI_DEVICE(0x1c44, 0x8000), board_ahci },
 
+	/* Cavium */
+	{ PCI_DEVICE(0x177d, 0xa01c), .driver_data = board_ahci },
+
 	/* Generic, PCI class code for AHCI */
 	{ PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
 	  PCI_CLASS_STORAGE_SATA_AHCI, 0xffffff, board_ahci },
@@ -1188,11 +1192,43 @@ static inline void ahci_gtf_filter_workaround(struct ata_host *host)
 {}
 #endif
 
+static int ahci_init_msix(struct pci_dev *pdev, unsigned int n_ports,
+			  struct ahci_host_priv *hpriv)
+{
+	int rc, nvec;
+	struct msix_entry entry = {};
+
+	/* check if msix is supported */
+	nvec = pci_msix_vec_count(pdev);
+	if (nvec <= 0)
+		return 0;
+
+	/* per-port msix interrupts are not supported */
+	if (n_ports > 1 && nvec >= n_ports)
+		return -ENOSYS;
+
+	/* only enable the first entry (entry.entry = 0) */
+	rc = pci_enable_msix_exact(pdev, &entry, 1);
+	if (rc < 0)
+		return rc;
+
+	pdev->irq = entry.vector;
+
+	return 1;
+}
+
 static int ahci_init_interrupts(struct pci_dev *pdev, unsigned int n_ports,
 				struct ahci_host_priv *hpriv)
 {
 	int rc, nvec;
 
+	nvec = ahci_init_msix(pdev, n_ports, hpriv);
+	if (nvec > 0)
+		return nvec;
+
+	if (nvec && nvec != -ENOSYS)
+		dev_err(&pdev->dev, "failed to enable MSI-X: %d", nvec);
+
 	if (hpriv->flags & AHCI_HFLAG_NO_MSI)
 		goto intx;
 
@@ -1271,11 +1307,13 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 		dev_info(&pdev->dev,
 			 "PDC42819 can only drive SATA devices with this driver\n");
 
-	/* Both Connext and Enmotus devices use non-standard BARs */
+	/* Some devices use non-standard BARs */
 	if (pdev->vendor == PCI_VENDOR_ID_STMICRO && pdev->device == 0xCC06)
 		ahci_pci_bar = AHCI_PCI_BAR_STA2X11;
 	else if (pdev->vendor == 0x1c44 && pdev->device == 0x8000)
 		ahci_pci_bar = AHCI_PCI_BAR_ENMOTUS;
+	else if (pdev->vendor == 0x177d && pdev->device == 0xa01c)
+		ahci_pci_bar = AHCI_PCI_BAR_CAVIUM;
 
 	/*
 	 * The JMicron chip 361/363 contains one SATA controller and one
-- 
2.1.3

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/