[PATCH v4 REPOST 3/5] ARM: tegra124: Add I2C controller ids to device tree

From: Mikko Perttunen
Date: Mon Nov 10 2014 - 08:13:49 EST


From: Mikko Perttunen <mperttunen@xxxxxxxxxx>

I2C controller ids are required when programming hardware blocks
that send messages to devices connected to an I2C bus, such as
when the PMC sends a poweroff message to the PMIC. Add ids
to all I2C controllers in Tegra124.

Signed-off-by: Mikko Perttunen <mperttunen@xxxxxxxxxx>
Reviewed-by: Wei Ni <wni@xxxxxxxxxx>
Tested-by: Wei Ni <wni@xxxxxxxxxx>
---
arch/arm/boot/dts/tegra124.dtsi | 6 ++++++
1 file changed, 6 insertions(+)

diff --git a/arch/arm/boot/dts/tegra124.dtsi b/arch/arm/boot/dts/tegra124.dtsi
index 41f8b27..0f09e93 100644
--- a/arch/arm/boot/dts/tegra124.dtsi
+++ b/arch/arm/boot/dts/tegra124.dtsi
@@ -361,6 +361,7 @@
reset-names = "i2c";
dmas = <&apbdma 21>, <&apbdma 21>;
dma-names = "rx", "tx";
+ nvidia,controller-id = <0>;
status = "disabled";
};

@@ -376,6 +377,7 @@
reset-names = "i2c";
dmas = <&apbdma 22>, <&apbdma 22>;
dma-names = "rx", "tx";
+ nvidia,controller-id = <1>;
status = "disabled";
};

@@ -391,6 +393,7 @@
reset-names = "i2c";
dmas = <&apbdma 23>, <&apbdma 23>;
dma-names = "rx", "tx";
+ nvidia,controller-id = <2>;
status = "disabled";
};

@@ -406,6 +409,7 @@
reset-names = "i2c";
dmas = <&apbdma 26>, <&apbdma 26>;
dma-names = "rx", "tx";
+ nvidia,controller-id = <3>;
status = "disabled";
};

@@ -421,6 +425,7 @@
reset-names = "i2c";
dmas = <&apbdma 24>, <&apbdma 24>;
dma-names = "rx", "tx";
+ nvidia,controller-id = <4>;
status = "disabled";
};

@@ -436,6 +441,7 @@
reset-names = "i2c";
dmas = <&apbdma 30>, <&apbdma 30>;
dma-names = "rx", "tx";
+ nvidia,controller-id = <5>;
status = "disabled";
};

--
2.1.3

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/