[PATCH] usb: musb: replace hard coded registers with defines

[Roman Byshko]

musb registers can be dumped using the file regdump
which is created in debugfs. Up to now  hard coded
register addresses are used for that. Different glue
layers however have different register addresses. The
patch addresses this issue by substituting bare register
addresses with defines.

Signed-off-by: Roman Byshko <rbyshko@xxxxxxxxx>
---
 drivers/usb/musb/musb_debugfs.c | 57 ++++++++++++++++++++++-------------------
 1 file changed, 30 insertions(+), 27 deletions(-)

diff --git a/drivers/usb/musb/musb_debugfs.c b/drivers/usb/musb/musb_debugfs.c
index 4c21679..ad3701a 100644
--- a/drivers/usb/musb/musb_debugfs.c
+++ b/drivers/usb/musb/musb_debugfs.c
@@ -49,33 +49,36 @@ struct musb_register_map {
 };
 
 static const struct musb_register_map musb_regmap[] = {
-	{ "FAddr",		0x00,	8 },
-	{ "Power",		0x01,	8 },
-	{ "Frame",		0x0c,	16 },
-	{ "Index",		0x0e,	8 },
-	{ "Testmode",		0x0f,	8 },
-	{ "TxMaxPp",		0x10,	16 },
-	{ "TxCSRp",		0x12,	16 },
-	{ "RxMaxPp",		0x14,	16 },
-	{ "RxCSR",		0x16,	16 },
-	{ "RxCount",		0x18,	16 },
-	{ "ConfigData",		0x1f,	8 },
-	{ "DevCtl",		0x60,	8 },
-	{ "MISC",		0x61,	8 },
-	{ "TxFIFOsz",		0x62,	8 },
-	{ "RxFIFOsz",		0x63,	8 },
-	{ "TxFIFOadd",		0x64,	16 },
-	{ "RxFIFOadd",		0x66,	16 },
-	{ "VControl",		0x68,	32 },
-	{ "HWVers",		0x6C,	16 },
-	{ "EPInfo",		0x78,	8 },
-	{ "RAMInfo",		0x79,	8 },
-	{ "LinkInfo",		0x7A,	8 },
-	{ "VPLen",		0x7B,	8 },
-	{ "HS_EOF1",		0x7C,	8 },
-	{ "FS_EOF1",		0x7D,	8 },
-	{ "LS_EOF1",		0x7E,	8 },
-	{ "SOFT_RST",		0x7F,	8 },
+	{ "FAddr",	MUSB_FADDR,	8 },
+	{ "Power",	MUSB_POWER,	8 },
+	{ "Frame",	MUSB_FRAME,	16 },
+	{ "Index",	MUSB_INDEX,	8 },
+	{ "Testmode",	MUSB_TESTMODE,	8 },
+	{ "TxMaxPp",	MUSB_TXMAXP,	16 },
+	{ "TxCSRp",	MUSB_TXCSR,	16 },
+	{ "RxMaxPp",	MUSB_RXMAXP,	16 },
+	{ "RxCSR",	MUSB_RXCSR,	16 },
+	{ "RxCount",	MUSB_RXCOUNT,	16 },
+	{ "ConfigData",	MUSB_CONFIGDATA,8 },
+	{ "IntrRxE",	MUSB_INTRRXE,	16 },
+	{ "IntrTxE",	MUSB_INTRTXE,	16 },
+	{ "IntrUsbE",	MUSB_INTRUSBE,	8 },
+	{ "DevCtl",	MUSB_DEVCTL,	8 },
+	{ "BabbleCtl",	MUSB_BABBLE_CTL,8 },
+	{ "TxFIFOsz",	MUSB_TXFIFOSZ,	8 },
+	{ "RxFIFOsz",	MUSB_RXFIFOSZ,	8 },
+	{ "TxFIFOadd",	MUSB_TXFIFOADD,	16 },
+	{ "RxFIFOadd",	MUSB_RXFIFOADD,	16 },
+	{ "VControl",	0x68,		32 },
+	{ "HWVers",	0x69,		16 },
+	{ "EPInfo",	MUSB_EPINFO,	8 },
+	{ "RAMInfo",	MUSB_RAMINFO,	8 },
+	{ "LinkInfo",	MUSB_LINKINFO,	8 },
+	{ "VPLen",	MUSB_VPLEN,	8 },
+	{ "HS_EOF1",	MUSB_HS_EOF1,	8 },
+	{ "FS_EOF1",	MUSB_FS_EOF1,	8 },
+	{ "LS_EOF1",	MUSB_LS_EOF1,	8 },
+	{ "SOFT_RST",	0x7F,		8 },
 	{ "DMA_CNTLch0",	0x204,	16 },
 	{ "DMA_ADDRch0",	0x208,	32 },
 	{ "DMA_COUNTch0",	0x20C,	32 },
-- 
2.1.2

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/