Re: [PATCH] ARM: OMAP4+: PM: Program CPU logic power state

[Tony Lindgren]

* Kevin Hilman <khilman@xxxxxxxxxx> [141024 11:04]:
> Nishanth Menon <nm@xxxxxx> writes:
> 
> > CPU logic power state is never programmed in either the initialization
> > or the suspend/resume logic, instead, we depend on mpuss to program this
> > properly. However, this leaves CPU logic power state indeterminate and
> > most probably in reset configuration (If bootloader or other similar
> > software have'nt monkeyed with the register). This can make powerstate=
> > RET be either programmed for CSWR (logic=ret) or OSWR(logic = OFF) and
> > in OSWR, there can be context loss when the code does not expect it.
> >
> > To prevent all these confusions, just support clearly ON, INA, CSWR,
> > OFF which is the intent of the existing code by explicitly programming
> > logic state.
> >
> > NOTE: since this is a hot path (using in cpuidle), the exit path just
> > programs powerstate (logic state is immaterial when powerstate is ON).
> >
> > Without doing this, we end up with lockups when CPUs enter OSWR and
> > multiple blocks loose context, when we expect them to hit CSWR.
> >
> > Signed-off-by: Nishanth Menon <nm@xxxxxx>
> 
> Acked-by: Kevin Hilman <khilman@xxxxxxxxxx>

Applying into omap-for-v3.19/soc thanks.

Tony
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/