Re: [PATCH v7 5/7] drm: bridge/dw-hdmi: add support for multi byte register width access

[Andy Yan]

On 2014å11æ11æ 22:20, Zubair Lutfullah Kakakhel wrote:
> Hi Andy,
>
> This patch adds the reg-io-width binding.
>
> Hence the binding patch should come before it.
   do you mean that I should put dts binding patch
   before this patch?
> On 11/11/14 12:53, Andy Yan wrote:
> > On rockchip rk3288, only word(32-bit) accesses are
> > permitted for hdmi registers.  Byte width accesses (writeb,
> > readb) generate an imprecise external abort.
> >
> > Signed-off-by: Andy Yan <andy.yan@xxxxxxxxxxxxxx>
> >
> > ---
> >
> >   }
> >   
> >   static void hdmi_modb(struct dw_hdmi *hdmi, u8 data, u8 mask, unsigned reg)
> > @@ -1499,6 +1527,23 @@ static int dw_hdmi_bind(struct device *dev, struct device *master, void *data)
> >   	struct device_node *ddc_node;
> >   	struct resource *iores;
> >   	int ret, irq;
> > +	u32 val = 1;
> > +
> > +	of_property_read_u32(np, "reg-io-width", &val);
> > +
> > +	switch (val) {
> > +	case 4:
> > +		hdmi->write = dw_hdmi_writel;
> > +		hdmi->read = dw_hdmi_readl;
> > +		break;
> > +	case 1:
> > +		hdmi->write = dw_hdmi_writeb;
> > +		hdmi->read = dw_hdmi_readb;
> > +		break;
> > +	default:
> > +		dev_err(dev, "reg-io-width must be 1 or 4\n");
> > +		return -EINVAL;
> > +	}
> The binding patch says this is an optional property.
> But here if undefined it returns -EINVAL.
>
> I would keep it optional and default it to byte access.
  if the dts undefined it, the val will be 1.
  if the dts defined other value except 4 and 1, return -EINVAL
> Regards,
> ZubairLK
>    
>
> _______________________________________________
> Linux-rockchip mailing list
> Linux-rockchip@xxxxxxxxxxxxxxxxxxx
> http://lists.infradead.org/mailman/listinfo/linux-rockchip


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/