[PATCH v2 01/14] ARM: STi: DT: STiH416: Add pinctl setup for usb controllers.

[Peter Griffin]

This patch adds the required pin config for all usb controllers
on the stih416.

Signed-off-by: Peter Griffin <peter.griffin@xxxxxxxxxx>
Acked-by: Lee Jones <lee.jones@xxxxxxxxxx>
---
 arch/arm/boot/dts/stih416-pinctrl.dtsi | 34 ++++++++++++++++++++++++++++++++++
 1 file changed, 34 insertions(+)

diff --git a/arch/arm/boot/dts/stih416-pinctrl.dtsi b/arch/arm/boot/dts/stih416-pinctrl.dtsi
index c2025bc..9cccf2d 100644
--- a/arch/arm/boot/dts/stih416-pinctrl.dtsi
+++ b/arch/arm/boot/dts/stih416-pinctrl.dtsi
@@ -147,6 +147,15 @@
 				};
 			};
 
+			usb {
+				pinctrl_usb3: usb3 {
+					st,pins {
+						oc-detect = <&pio40 0 ALT1 IN>;
+						pwr-enable = <&pio40 1 ALT1 OUT>;
+					};
+				};
+			};
+
 			sbc_i2c1 {
 				pinctrl_sbc_i2c1_default: sbc_i2c1-default {
 					st,pins {
@@ -318,6 +327,16 @@
 				};
 			};
 
+			usb {
+				pinctrl_usb0: usb0 {
+					st,pins {
+						oc-detect = <&pio9 4 ALT1 IN>;
+						pwr-enable = <&pio9 5 ALT1 OUT>;
+					};
+				};
+			};
+
+
 			i2c1 {
 				pinctrl_i2c1_default: i2c1-default {
 					st,pins {
@@ -506,6 +525,21 @@
 					};
 				};
 			};
+
+			usb {
+				pinctrl_usb1: usb1 {
+					st,pins {
+						oc-detect = <&pio18 0 ALT1 IN>;
+						pwr-enable = <&pio18 1 ALT1 OUT>;
+					};
+				};
+				pinctrl_usb2: usb2 {
+					st,pins {
+						oc-detect = <&pio18 2 ALT1 IN>;
+						pwr-enable = <&pio18 3 ALT1 OUT>;
+					};
+				};
+			};
 		};
 
 		pin-controller-fvdp-fe {
-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/