[RFC PATCH 2/2] dt-bindings: clk: add document for assigned-clock-force-rates usage

[Kever Yang]

This patch adds document for how to use the opetion property
assigned-clock-force-rates.

We may use this property to force update a clock setting.

Signed-off-by: Kever Yang <kever.yang@xxxxxxxxxxxxxx>
---

 Documentation/devicetree/bindings/clock/clock-bindings.txt | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/clock/clock-bindings.txt b/Documentation/devicetree/bindings/clock/clock-bindings.txt
index 06fc6d5..fb5d3a5 100644
--- a/Documentation/devicetree/bindings/clock/clock-bindings.txt
+++ b/Documentation/devicetree/bindings/clock/clock-bindings.txt
@@ -154,11 +154,14 @@ set to 0, or can be omitted if it is not followed by any non-zero entry.
 
         assigned-clocks = <&clkcon 0>, <&pll 2>;
         assigned-clock-parents = <&pll 2>;
+        assigned-clock-force-rates = <500000>, <0>;
         assigned-clock-rates = <0>, <460800>;
     };
 
-In this example the <&pll 2> clock is set as parent of clock <&clkcon 0> and
-the <&pll 2> clock is assigned a frequency value of 460800 Hz.
+In this example the <&pll 2> clock is set as parent of clock <&clkcon 0>,
+the <&clkcon 0> clock is assigned a frequency value of 500000 Hz and make
+sure the we get into assigned-clock-rates even if there is no rate change,
+and the <&pll 2> clock is assigned a frequency value of 460800 Hz.
 
 Configuring a clock's parent and rate through the device node that consumes
 the clock can be done only for clocks that have a single user. Specifying
-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/