Re: [alsa-devel] Question on Compressed offload session

From: gsantosh
Date: Thu Nov 13 2014 - 23:08:35 EST


> On 11/12/14, 9:02 PM, gsantosh@xxxxxxxxxxxxxx wrote:
>> Hi All,
>>
>> The Question is for the compressed offload session.
>>
>> For a generic codec driver during the startup function it will set some
>> of
>> the hw_constraints rule similarly like this.
>>
>> snd_pcm_hw_constraint_list(substream->runtime, 0,
>> SNDRV_PCM_HW_PARAM_RATE,
>> &constraints_12_24);
>>
>> pcm_lib.c will try to add the rule to the runtime structure by accessing
>> the pointers which will be initialized during opening of the session,
>> as The Constraints added by the codec driver will be updated in the
>>
>> struct snd_pcm_hw_constraints of runtime structure which will be part of
>> substream handle.
>>
>> But for the compressed offload I do not see the initialization done for
>> HW
>> constraints, as done in pcm session
>>
>> 2092int snd_pcm_open_substream(struct snd_pcm *pcm, int stream,
>> 2093 struct file *file,
>> 2094 struct snd_pcm_substream **rsubstream)
>>
>> most of the existing drivers which has the hw_constraint_list code will
>> not be applicable for compress offload session, how to solve this?
>
> You can't directly link physical output/input with the decoder/encoder
> in general.
> For decoders, the sample-rate may not always be known ahead of time,
> e.g. with AAC-SBR implicit signaling. There is no way to add constraints
> on open, there is an assumption that a sample-rate converter is part of
> the chain to take care of the difference between the output of the
> offloaded decoder and the back-end actual sampling frequency (same with
> number of channels and bit-width btw).
> Likewise if you encode the frequency may not be the same as what the
> backend provides and some SRC might be needed.
> -Pierre
>

I Agree we cannot have a direct link between physical output / input with
decoder / encoder, during compressed playback.
My concern here is, if we have a legacy codec driver which is used for the
PCM out, and in the start up of this codec driver it is adding
hw_constraints list, now the same codec driver is used for the compressed
session FE or PCM session FE,
If the routing is such that compressed FE -> codec the hw_constraints
added by this driver is not valid here,
and legacy drivers needs to be changed,
Now the question comes how to change this drivers?
I can think of following things
if the routing is done for Compressed FE -> codec

1) in Codec driver avoid adding hw_constraint during startup if compressed
session is routed, this recommend for codec driver to know that compress
session is routed to codec which I feel not the correct way to handle this

I was checking how to handle this situation in much better way.

Regards
Santosh

> _______________________________________________
> Alsa-devel mailing list
> Alsa-devel@xxxxxxxxxxxxxxxx
> http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
>


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/