[PATCH v12 3/6] amba: Don't unprepare the clocks if device driver wants IRQ safe runtime PM

From: Krzysztof Kozlowski
Date: Fri Nov 14 2014 - 03:52:55 EST


The AMBA bus driver defines runtime Power Management functions which
disable and unprepare AMBA bus clock. This is problematic for runtime PM
because unpreparing a clock might sleep so it is not interrupt safe.

However some drivers may want to implement runtime PM functions in
interrupt-safe way (see pm_runtime_irq_safe()). In such case the AMBA
bus driver should only disable/enable the clock in runtime suspend and
resume callbacks.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
Reviewed-by: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
---
drivers/amba/bus.c | 15 +++++++++++----
1 file changed, 11 insertions(+), 4 deletions(-)

diff --git a/drivers/amba/bus.c b/drivers/amba/bus.c
index a4ac490dd784..c2153a1d1981 100644
--- a/drivers/amba/bus.c
+++ b/drivers/amba/bus.c
@@ -95,8 +95,12 @@ static int amba_pm_runtime_suspend(struct device *dev)
struct amba_device *pcdev = to_amba_device(dev);
int ret = pm_generic_runtime_suspend(dev);

- if (ret == 0 && dev->driver)
- clk_disable_unprepare(pcdev->pclk);
+ if (ret == 0 && dev->driver) {
+ if (pm_runtime_is_irq_safe(dev))
+ clk_disable(pcdev->pclk);
+ else
+ clk_disable_unprepare(pcdev->pclk);
+ }

return ret;
}
@@ -107,7 +111,10 @@ static int amba_pm_runtime_resume(struct device *dev)
int ret;

if (dev->driver) {
- ret = clk_prepare_enable(pcdev->pclk);
+ if (pm_runtime_is_irq_safe(dev))
+ ret = clk_enable(pcdev->pclk);
+ else
+ ret = clk_prepare_enable(pcdev->pclk);
/* Failure is probably fatal to the system, but... */
if (ret)
return ret;
@@ -115,7 +122,7 @@ static int amba_pm_runtime_resume(struct device *dev)

return pm_generic_runtime_resume(dev);
}
-#endif
+#endif /* CONFIG_PM */

static const struct dev_pm_ops amba_pm = {
.suspend = pm_generic_suspend,
--
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/