[PATCH 1/1] drivers: net: cpsw: Fix TX_IN_SEL offset

From: John Ogness
Date: Fri Nov 14 2014 - 09:43:10 EST


The TX_IN_SEL offset for the CPSW_PORT/TX_IN_CTL register was
incorrect. This caused the Dual MAC mode to never get set when
it should. It also caused possible unintentional setting of a
bit in the CPSW_PORT/TX_BLKS_REM register.

The purpose of setting the Dual MAC mode for this register is to:

"... allow packets from both ethernet ports to be written into
the FIFO without one port starving the other port."
- AM335x ARM TRM

Signed-off-by: John Ogness <john.ogness@xxxxxxxxxxxxx>
---
drivers/net/ethernet/ti/cpsw.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/ti/cpsw.c b/drivers/net/ethernet/ti/cpsw.c
index d879448..c560f9a 100644
--- a/drivers/net/ethernet/ti/cpsw.c
+++ b/drivers/net/ethernet/ti/cpsw.c
@@ -129,9 +129,9 @@ do { \
#define CPSW_VLAN_AWARE BIT(1)
#define CPSW_ALE_VLAN_AWARE 1

-#define CPSW_FIFO_NORMAL_MODE (0 << 15)
-#define CPSW_FIFO_DUAL_MAC_MODE (1 << 15)
-#define CPSW_FIFO_RATE_LIMIT_MODE (2 << 15)
+#define CPSW_FIFO_NORMAL_MODE (0 << 16)
+#define CPSW_FIFO_DUAL_MAC_MODE (1 << 16)
+#define CPSW_FIFO_RATE_LIMIT_MODE (2 << 16)

#define CPSW_INTPACEEN (0x3f << 16)
#define CPSW_INTPRESCALE_MASK (0x7FF << 0)
--
1.7.10.4
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/