[PATCH v2 2/2] ARM: dts: Add devicetree for NovaTech OrionLXm
From: George McCollister
Date: Mon Nov 17 2014 - 14:04:18 EST
This adds the NovaTech OrionLXm which is based on the AM335x SoC
http://www.novatechweb.com/substation-automation/orionlxm/
RAM: 512MiB
Flash: 4GB eMMC
Ethernet PHYs: 2x Micrel KSZ8041FTLI
USB ports are used internally by the expansion cards.
Internal micro SD slot is available.
Signed-off-by: George McCollister <george.mccollister@xxxxxxxxx>
---
.../devicetree/bindings/arm/omap/omap.txt | 3 +
arch/arm/boot/dts/Makefile | 3 +-
arch/arm/boot/dts/am335x-lxm.dts | 362 +++++++++++++++++++++
3 files changed, 367 insertions(+), 1 deletion(-)
create mode 100644 arch/arm/boot/dts/am335x-lxm.dts
diff --git a/Documentation/devicetree/bindings/arm/omap/omap.txt b/Documentation/devicetree/bindings/arm/omap/omap.txt
index ddd9bcd..4f6a82c 100644
--- a/Documentation/devicetree/bindings/arm/omap/omap.txt
+++ b/Documentation/devicetree/bindings/arm/omap/omap.txt
@@ -132,6 +132,9 @@ Boards:
- AM335X Bone : Low cost community board
compatible = "ti,am335x-bone", "ti,am33xx", "ti,omap3"
+- AM335X OrionLXm : Substation Automation Platform
+ compatible = "novatech,am335x-lxm", "ti,am33xx"
+
- OMAP5 EVM : Evaluation Module
compatible = "ti,omap5-evm", "ti,omap5"
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 38c89ca..454ee6c 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -331,7 +331,8 @@ dtb-$(CONFIG_SOC_AM33XX) += am335x-base0033.dtb \
am335x-evm.dtb \
am335x-evmsk.dtb \
am335x-nano.dtb \
- am335x-pepper.dtb
+ am335x-pepper.dtb \
+ am335x-lxm.dtb
dtb-$(CONFIG_ARCH_OMAP4) += omap4-duovero-parlor.dtb \
omap4-panda.dtb \
omap4-panda-a4.dtb \
diff --git a/arch/arm/boot/dts/am335x-lxm.dts b/arch/arm/boot/dts/am335x-lxm.dts
new file mode 100644
index 0000000..7266a00
--- /dev/null
+++ b/arch/arm/boot/dts/am335x-lxm.dts
@@ -0,0 +1,362 @@
+/*
+ * Copyright (C) 2014 NovaTech LLC - http://www.novatechweb.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+#include "am33xx.dtsi"
+
+/ {
+ model = "NovaTech OrionLXm";
+ compatible = "novatech,am335x-lxm", "ti,am33xx";
+
+ cpus {
+ cpu@0 {
+ cpu0-supply = <&vdd1_reg>;
+ };
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x80000000 0x20000000>; /* 512 MB */
+ };
+
+ /* Power supply provides a fixed 5V @2A */
+ vbat: fixedregulator@0 {
+ compatible = "regulator-fixed";
+ regulator-name = "vbat";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-boot-on;
+ };
+
+ /* Power supply provides a fixed 3.3V @3A */
+ vmmcsd_fixed: fixedregulator@1 {
+ compatible = "regulator-fixed";
+ regulator-name = "vmmcsd_fixed";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ };
+};
+
+&am33xx_pinmux {
+ mmc1_pins: pinmux_mmc1_pins {
+ pinctrl-single,pins = <
+ 0xf0 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat3 */
+ 0xf4 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat2 */
+ 0xf8 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat1 */
+ 0xfc (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat0 */
+ 0x100 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_clk */
+ 0x104 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_cmd */
+ >;
+ };
+
+ i2c0_pins: pinmux_i2c0_pins {
+ pinctrl-single,pins = <
+ 0x188 (PIN_INPUT | MUX_MODE0) /* i2c0_sda.i2c0_sda */
+ 0x18c (PIN_INPUT | MUX_MODE0) /* i2c0_scl.i2c0_scl */
+ >;
+ };
+
+ cpsw_default: cpsw_default {
+ pinctrl-single,pins = <
+ /* Slave 1 */
+ 0x64 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii1_int */
+ 0x10c (PIN_INPUT_PULLDOWN | MUX_MODE1) /* rmii1_crs_dv */
+ 0x110 (PIN_INPUT_PULLDOWN | MUX_MODE1) /* rmii1_rxer */
+ 0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* rmii1_txen */
+ 0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* rmii1_td1 */
+ 0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* rmii1_td0 */
+ 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE1) /* rmii1_rd1 */
+ 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE1) /* rmii1_rd0 */
+ 0x144 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii1_refclk */
+
+ /* Slave 2 */
+ 0x40 (PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* rmii2_txen */
+ 0x50 (PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* rmii2_td1 */
+ 0x54 (PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* rmii2_td0 */
+ 0x68 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* rmii2_rd1 */
+ 0x6c (PIN_INPUT_PULLDOWN | MUX_MODE3) /* rmii2_rd0 */
+ 0x70 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* rmii2_crs_dv */
+ 0x74 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* rmii2_rxer */
+ 0x78 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii2_int */
+ 0x108 (PIN_INPUT_PULLDOWN | MUX_MODE1) /* rmii2_refclk */
+ >;
+ };
+
+ cpsw_sleep: cpsw_sleep {
+ pinctrl-single,pins = <
+ /* Slave 1 reset value */
+ 0x64 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii1_int */
+ 0x10c (PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii1_crs_dv */
+ 0x110 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii1_rxer */
+ 0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii1_txen */
+ 0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii1_td1 */
+ 0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii1_td0 */
+ 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii1_rd1 */
+ 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii1_rd0 */
+ 0x144 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii1_refclk */
+
+ /* Slave 2 reset value*/
+ 0x40 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii2_txen */
+ 0x50 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii2_td1 */
+ 0x54 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii2_td0 */
+ 0x68 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii2_rd1 */
+ 0x6c (PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii2_rd0 */
+ 0x70 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii2_crs_dv */
+ 0x74 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii2_rxer */
+ 0x78 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii2_int */
+ 0x108 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii2_refclk */
+ >;
+ };
+
+ davinci_mdio_default: davinci_mdio_default {
+ pinctrl-single,pins = <
+ /* MDIO */
+ 0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */
+ 0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */
+ >;
+ };
+
+ davinci_mdio_sleep: davinci_mdio_sleep {
+ pinctrl-single,pins = <
+ /* MDIO reset value */
+ 0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ 0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ >;
+ };
+
+ emmc_pins: pinmux_emmc_pins {
+ pinctrl-single,pins = <
+ 0x80 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */
+ 0x84 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd */
+ 0x00 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */
+ 0x04 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */
+ 0x08 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */
+ 0x0c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */
+ 0x10 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad4.mmc1_dat4 */
+ 0x14 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad5.mmc1_dat5 */
+ 0x18 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad6.mmc1_dat6 */
+ 0x1c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad7.mmc1_dat7 */
+ >;
+ };
+
+ uart0_pins: pinmux_uart0_pins {
+ pinctrl-single,pins = <
+ 0x170 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */
+ 0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */
+ >;
+ };
+};
+
+&i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins>;
+
+ status = "okay";
+ clock-frequency = <400000>;
+
+ serial_config1: serial_config1@20 {
+ compatible = "nxp,pca9539";
+ reg = <0x20>;
+ };
+
+ serial_config2: serial_config2@21 {
+ compatible = "nxp,pca9539";
+ reg = <0x21>;
+ };
+
+ tps: tps@2d {
+ compatible = "ti,tps65910";
+ reg = <0x2d>;
+ };
+};
+
+/include/ "tps65910.dtsi"
+
+&tps {
+ vcc1-supply = <&vbat>;
+ vcc2-supply = <&vbat>;
+ vcc3-supply = <&vbat>;
+ vcc4-supply = <&vbat>;
+ vcc5-supply = <&vbat>;
+ vcc6-supply = <&vbat>;
+ vcc7-supply = <&vbat>;
+ vccio-supply = <&vbat>;
+
+ regulators {
+ /* vrtc - unused */
+
+ vio_reg: regulator@1 {
+ regulator-name = "vio_1v5,ddr";
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vdd1_reg: regulator@2 {
+ regulator-name = "vdd1,mpu";
+ regulator-min-microvolt = <600000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vdd2_reg: regulator@3 {
+ regulator-name = "vdd2_1v1,core";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ /* vdd3 - unused */
+
+ /* vdig1 - unused */
+
+ vdig2_reg: regulator@6 {
+ regulator-name = "vdig2_1v8,vdds_pll";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ /* vpll - unused */
+
+ vdac_reg: regulator@8 {
+ regulator-name = "vdac_1v8,vdds";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vaux1_reg: regulator@9 {
+ regulator-name = "vaux1_1v8,usb";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vaux2_reg: regulator@10 {
+ regulator-name = "vaux2_3v3,io";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vaux33_reg: regulator@11 {
+ regulator-name = "vaux33_3v3,usb";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vmmc_reg: regulator@12 {
+ regulator-name = "vmmc_3v3,io";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+ };
+};
+
+&sham {
+ status = "okay";
+};
+
+&aes {
+ status = "okay";
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins>;
+
+ status = "okay";
+};
+
+&usb {
+ status = "okay";
+};
+
+&usb_ctrl_mod {
+ status = "okay";
+};
+
+&usb0_phy {
+ status = "okay";
+};
+
+&usb1_phy {
+ status = "okay";
+};
+
+&usb0 {
+ status = "okay";
+ dr_mode = "host";
+};
+
+&usb1 {
+ status = "okay";
+ dr_mode = "host";
+};
+
+&cppi41dma {
+ status = "okay";
+};
+
+&cpsw_emac0 {
+ phy_id = <&davinci_mdio>, <5>;
+ phy-mode = "rmii";
+ dual_emac_res_vlan = <2>;
+};
+
+&cpsw_emac1 {
+ phy_id = <&davinci_mdio>, <4>;
+ phy-mode = "rmii";
+ dual_emac_res_vlan = <3>;
+};
+
+&mac {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&cpsw_default>;
+ pinctrl-1 = <&cpsw_sleep>;
+ dual_emac = <1>;
+ status = "okay";
+};
+
+&davinci_mdio {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&davinci_mdio_default>;
+ pinctrl-1 = <&davinci_mdio_sleep>;
+ status = "okay";
+};
+
+&mmc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc1_pins>;
+ vmmc-supply = <&vmmcsd_fixed>;
+ bus-width = <4>;
+ status = "okay";
+};
+
+&mmc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&emmc_pins>;
+ vmmc-supply = <&vmmcsd_fixed>;
+ bus-width = <8>;
+ ti,non-removable;
+ status = "okay";
+};
+
--
2.1.0
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/