[PATCH 3.12 100/206] media: ds3000: fix LNB supply voltage on Tevii S480 on initialization

[Jiri Slaby]

From: Ulrich Eckhardt <uli-lirc@xxxxxxxxxxxxxxx>

3.12-stable review patch.  If anyone has any objections, please let me know.

===============

commit 8c5bcded11cb607b1bb5920de3b9c882136d27db upstream.

The Tevii S480 outputs 18V on startup for the LNB supply voltage and does not
automatically power down. This blocks other receivers connected
to a satellite channel router (EN50494), since the receivers can not send the
required DiSEqC sequences when the Tevii card is connected to a the same SCR.

This patch switches off the LNB supply voltage on initialization of the frontend.

[mchehab@xxxxxxxxxxxxxxx: add a comment about why we're explicitly
 turning off voltage at device init]
Signed-off-by: Ulrich Eckhardt <uli@xxxxxxxxxxxxxxx>
Signed-off-by: Mauro Carvalho Chehab <mchehab@xxxxxxxxxxxxxxx>
Signed-off-by: Jiri Slaby <jslaby@xxxxxxx>
---
 drivers/media/dvb-frontends/ds3000.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/media/dvb-frontends/ds3000.c b/drivers/media/dvb-frontends/ds3000.c
index 1e344b033277..22e8c2032f6d 100644
--- a/drivers/media/dvb-frontends/ds3000.c
+++ b/drivers/media/dvb-frontends/ds3000.c
@@ -864,6 +864,13 @@ struct dvb_frontend *ds3000_attach(const struct ds3000_config *config,
 	memcpy(&state->frontend.ops, &ds3000_ops,
 			sizeof(struct dvb_frontend_ops));
 	state->frontend.demodulator_priv = state;
+
+	/*
+	 * Some devices like T480 starts with voltage on. Be sure
+	 * to turn voltage off during init, as this can otherwise
+	 * interfere with Unicable SCR systems.
+	 */
+	ds3000_set_voltage(&state->frontend, SEC_VOLTAGE_OFF);
 	return &state->frontend;
 
 error3:
-- 
2.1.3

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/