Re: [PATCH v2] ARM: bcm2835: add device tree for Raspberry Pi model B+

[Stephen Warren]

On 11/19/2014 08:29 AM, Lee Jones wrote:
> > The model B and B+ differ in the GPIO lines for ACT and PWR leds, and the
> > I2S interface.
> >
> > Signed-off-by: Matthias Klein <matthias.klein@xxxxxxxxx>
> > ---
> > Changes in v2:
> > - move the common parts between the B and B+ model into the new bcm2835-rpi.dtsi file
> >
> > - add the I2S signals to the B+ file which fix the problem that USB is not working
> >    with the current bcm2835-rpi-b.dts file on the B+.
> > ---
> >   arch/arm/boot/dts/Makefile               |  1 +
> >   arch/arm/boot/dts/bcm2835-rpi-b-plus.dts | 30 +++++++++++++++++++
> >   arch/arm/boot/dts/bcm2835-rpi-b.dts      | 46 ++--------------------------
> >   arch/arm/boot/dts/bcm2835-rpi.dtsi       | 51 ++++++++++++++++++++++++++++++++
> >   4 files changed, 85 insertions(+), 43 deletions(-)
> >   create mode 100644 arch/arm/boot/dts/bcm2835-rpi-b-plus.dts
> >   create mode 100644 arch/arm/boot/dts/bcm2835-rpi.dtsi
>
> Sorry for the delay.  I thought RPi world was exceptionally quiet, but
> in fact I had issues with my newly setup mailbox and filters.  All
> rectified now in any case.
>
> It might be worth noting that this will not likely land in v3.19, as
> we are one step removed from Linus (i.e. via ARM SoC) and they usually
> like to have pull-requests in by -rc5.  Unless anyone stamps their
> feet, I'll be sending this no sooner than v3.20.

-rc6 is the usual cut-off, and the arm-soc maintainers have said that's 
not always a very strict cut-off; it depends on how invasive the patch 
is (which this isn't) and whether the patch has been in linux-next 
already before getting into arm-soc (and linux-rpi.git's for-next branch 
is in linux-next).
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/