Re: [PATCH v7 4/4] dt-bindings: add bindings for mediatek sysirq

From: Mark Rutland
Date: Wed Nov 19 2014 - 13:07:50 EST


On Wed, Nov 19, 2014 at 02:14:11PM +0000, Yingjoe Chen wrote:
> Add binding documentation for Mediatek SoC SYSIRQ.
>
> Signed-off-by: Yingjoe Chen <yingjoe.chen@xxxxxxxxxxxx>
> ---
> .../bindings/arm/mediatek/mediatek,sysirq.txt | 26 ++++++++++++++++++++++
> 1 file changed, 26 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/arm/mediatek/mediatek,sysirq.txt
>
> diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,sysirq.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,sysirq.txt
> new file mode 100644
> index 0000000..8669536
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,sysirq.txt
> @@ -0,0 +1,26 @@
> +Mediatek 65xx/81xx sysirq
> +
> +Mediatek SOCs sysirq support controllable irq inverter for each GIC SPI
> +interrupt.
> +
> +Required properties:
> +- compatible: should be one of:
> + "mediatek,mt8135-sysirq"
> + "mediatek,mt8127-sysirq"
> + "mediatek,mt6589-sysirq"
> + "mediatek,mt6582-sysirq"
> + "mediatek,mt6577-sysirq"
> +- interrupt-controller : Identifies the node as an interrupt controller
> +- #interrupt-cells : Must use the same cells/format as parent controller.
> +- interrupt-parent: phandle of irq domain parent for sysirq.

I'm concerned that this sounds very general while the binding assumes
the GICv2 interrupt-specifier format. Either the driver needs to become
more general, or this needs to be tightened up.

It's also odd to say "irq domain parent", as that's purely a Linux
construct and has nothing to do with the HW.

Thanks,
Mark.

> +- reg: Physical base address of the intpol registers and length of memory
> + mapped region.
> +
> +Example:
> + sysirq: interrupt-controller@10200100 {
> + compatible = "mediatek,mt6589-sysirq", "mediatek,mt6577-sysirq";
> + interrupt-controller;
> + #interrupt-cells = <3>;
> + interrupt-parent = <&gic>;
> + reg = <0 0x10200100 0 0x1c>;
> + };
> --
> 1.8.1.1.dirty
>
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/