Re: For the problem when using swiotlb

[Ding Tianhong]

On 2014/11/19 16:45, Arnd Bergmann wrote:
> On Wednesday 19 November 2014 11:17:15 Ding Tianhong wrote:
>> On 2014/11/18 2:09, Catalin Marinas wrote:
>>> On Mon, Nov 17, 2014 at 12:18:42PM +0000, Arnd Bergmann wrote:
>>>> On Monday 17 November 2014 19:56:27 Ding Tianhong wrote:
>>>>>         The commit 3690951fc6d42f3a0903987677d0e592c49dd8db(arm64: Use swiotlb late initialisation)
>>>>> switches the DMA mapping code to swiotlb_tlb_late_init_with_default_size(), this will occur a problem
>>>>> when I run the scsi stress tests, the message as below:
>>>>>
>>>>>         sas_controller b1000000.sas: swiotlb buffer is full (sz: 65536 bytes)..
>>>>>         DMA: Out of SW-IOMMU space for 65536 bytes at device b1000000.sas
>>>>>
>>>>> The reason is that the swiotlb_tlb_late_init_with_default_size() could only alloc 16M memory for DMA-mapping,
>>>>> and the param in cmdline "swiotlb=xxx" is useless because the get_free_pages() only use the buddy to assigned a
>>>>> maximum memory of 16M(The MAX_ORDER is 13 for 4k pages), obviously 16M is too small in many scenes, but
>>>>> the swiotlb_init() which could reserved a bigger memory as wished could work well for most drivers.
>>>>>
>>>>> I could not get a better way to fix this problem except to revert this patch, so could you please give me some
>>>>> advise and help me, thanks very much.
>>>>
>>>> In general, you should not need to use swiotlb for most devices, in
>>>> particular for high-performance devices like network or block.
>>>>
>>>> Please make sure that you have set up the dma-ranges properties in
>>>> your DT properly to allow 64-bit DMA if the device supports it.
>>>
>>> That's the problem indeed, the DMA API ends up using swiotlb bounce
>>> buffers because the physical address of the pages passed to (or
>>> allocated by) the driver are beyond 32-bit limit (which is the default
>>> dma mask).
>>>
>>
>> Thanks everyone, I think I found the way to fix it, need to enable DMA_CMA, to reserve a big memory
>> for CMA and set coherent mask for dev, then dma_alloc and dma_mapping will not use the swiotlb until
>> the memory out of mask or swiotlb_force is enabled.
>>
>> If I still understand uncorrectly, please inform me.
>>
> 
> Please do not use CMA to work around the problem, but fix the underlying bug
> instead.
> 
> The driver should call 'dma_set_mask_and_coherent()' with the appropriate
> dma mask, and check whether that succeeded. However, the code implementing
> dma_set_mask_and_coherent on arm64 also needs to be changed to look up
> the dma-ranges property (see of_dma_configure()), and check if the mask
> is possible.
> 
> 	Arnd
> 

The dma_pfn_offset looks only support arm32, but my platform is aarch64 and I check the latest kernel version, 
I think the dma-rangs still could not work for aarch64, so maybe we should add dma_pfn_offset for aarch64 first.

Ding

> .
> 


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/