Re: [PATCH V3] arm64: amd-seattle: Adding device tree for AMD Seattle platform

[Rob Herring]

On Thu, Nov 13, 2014 at 5:29 AM, Arnd Bergmann <arnd@xxxxxxxx> wrote:
> On Tuesday 28 October 2014 08:36:54 suravee.suthikulpanit@xxxxxxx wrote:
>> From: Suravee Suthikulpanit <Suravee.Suthikulpanit@xxxxxxx>
>>
>> Initial revision of device tree for AMD Seattle platform
>
> Sorry for not looking at this earlier in enough detail.
>
>> +     dma0: dma@0500000 {
>> +             compatible = "arm,pl330", "arm,primecell";
>> +             reg = <0 0x0500000 0 0x1000>;
>> +             interrupts =
>> +                     <0 368 4>,
>> +                     <0 369 4>,
>> +                     <0 370 4>,
>> +                     <0 371 4>,
>> +                     <0 372 4>,
>> +                     <0 373 4>,
>> +                     <0 374 4>,
>> +                     <0 375 4>;
>> +             clocks = <&dmaclk_500mhz>;
>> +             clock-names = "apb_pclk";
>> +             #dma-cells = <1>;
>> +     };
>
> Is this device cache-coherent?
>
> Does it support larger than 32-bit DMA addresses?

No.

>
>> +     sata0: sata@00300000 {
>> +             compatible = "snps,dwc-ahci";

This should have an AMD specific compatible string in addition in case
you have AMD specific configuration or bugs.

>> +             reg = <0 0x300000 0 0x800>;
>> +             interrupts = <0 355 4>;
>> +             clocks = <&sataclk_333mhz>;
>> +             clock-names = "apb_pclk";

This name is obviously wrong and copied from other (ARM Primecell)
bindings as this IP does not have an APB PCLK. You can drop the name
as it is optional.

>> +             dma-coherent;
>> +     };
>
> Same here: you list it as coherent, but not 64-bit DMA capable.
> Is that intentional?

AHCI controllers are probeable as to whether they support 64-bit DMA or not.

Rob
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/