[PATCH v3 1/3] ACPI / PMIC: support PMIC operation region for CrystalCove

From: Aaron Lu
Date: Fri Nov 21 2014 - 02:12:07 EST


The Baytrail-T platform firmware has defined two customized operation
regions for PMIC chip Crystal Cove - one is for power resource handling
and one is for thermal: sensor temperature reporting, trip point setting,
etc. This patch adds support for them on top of the existing Crystal Cove
PMIC driver.

The reason to split code into a separate file intel_pmic.c is that there
are more PMIC drivers with ACPI operation region support coming and we can
re-use those code. The intel_pmic_opregion_data structure is created also
for this purpose: when we need to support a new PMIC's operation region,
we just need to fill those callbacks and the two register mapping tables.

Signed-off-by: Aaron Lu <aaron.lu@xxxxxxxxx>
Acked-by: Lee Jones <lee.jones@xxxxxxxxxx> for the MFD part
---
drivers/acpi/Kconfig | 17 ++
drivers/acpi/Makefile | 3 +
drivers/acpi/pmic/intel_pmic.c | 339 +++++++++++++++++++++++++++++++++++++
drivers/acpi/pmic/intel_pmic.h | 34 ++++
drivers/acpi/pmic/intel_pmic_crc.c | 216 +++++++++++++++++++++++
drivers/mfd/intel_soc_pmic_crc.c | 3 +
6 files changed, 612 insertions(+)
create mode 100644 drivers/acpi/pmic/intel_pmic.c
create mode 100644 drivers/acpi/pmic/intel_pmic.h
create mode 100644 drivers/acpi/pmic/intel_pmic_crc.c

diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig
index 79078b8f5697..3e5f2056f946 100644
--- a/drivers/acpi/Kconfig
+++ b/drivers/acpi/Kconfig
@@ -393,4 +393,21 @@ config ACPI_EXTLOG
driver adds support for that functionality with corresponding
tracepoint which carries that information to userspace.

+menuconfig PMIC_OPREGION
+ bool "PMIC (Power Management Integrated Circuit) operation region support"
+ help
+ Select this option to enable support for ACPI operation
+ region of the PMIC chip. The operation region can be used
+ to control power rails and sensor reading/writing on the
+ PMIC chip.
+
+if PMIC_OPREGION
+config CRC_PMIC_OPREGION
+ bool "ACPI operation region support for CrystalCove PMIC"
+ depends on INTEL_SOC_PMIC
+ help
+ This config adds ACPI operation region support for CrystalCove PMIC.
+
+endif
+
endif # ACPI
diff --git a/drivers/acpi/Makefile b/drivers/acpi/Makefile
index 6d11522f0e48..f5938399ac14 100644
--- a/drivers/acpi/Makefile
+++ b/drivers/acpi/Makefile
@@ -88,3 +88,6 @@ obj-$(CONFIG_ACPI_PROCESSOR_AGGREGATOR) += acpi_pad.o
obj-$(CONFIG_ACPI_APEI) += apei/

obj-$(CONFIG_ACPI_EXTLOG) += acpi_extlog.o
+
+obj-$(CONFIG_PMIC_OPREGION) += pmic/intel_pmic.o
+obj-$(CONFIG_CRC_PMIC_OPREGION) += pmic/intel_pmic_crc.o
diff --git a/drivers/acpi/pmic/intel_pmic.c b/drivers/acpi/pmic/intel_pmic.c
new file mode 100644
index 000000000000..5dbc0fb4d536
--- /dev/null
+++ b/drivers/acpi/pmic/intel_pmic.c
@@ -0,0 +1,339 @@
+/*
+ * intel_pmic.c - Intel PMIC operation region driver
+ *
+ * Copyright (C) 2014 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/acpi.h>
+#include <linux/regmap.h>
+#include "intel_pmic.h"
+
+#define PMIC_PMOP_OPREGION_ID 0x8d
+#define PMIC_THERMAL_OPREGION_ID 0x8c
+
+struct acpi_lpat {
+ int temp;
+ int raw;
+};
+
+struct intel_pmic_opregion {
+ struct mutex lock;
+ struct acpi_lpat *lpat;
+ int lpat_count;
+ struct regmap *regmap;
+ struct intel_pmic_opregion_data *data;
+};
+
+static struct pmic_pwr_reg *
+pmic_get_pwr_reg(int address, struct pmic_pwr_table *table, int count)
+{
+ int i;
+
+ for (i = 0; i < count; i++) {
+ if (table[i].address == address)
+ return &table[i].pwr_reg;
+ }
+ return NULL;
+}
+
+static int
+pmic_get_thermal_reg(int address, struct pmic_thermal_table *table, int count)
+{
+ int i;
+
+ for (i = 0; i < count; i++) {
+ if (table[i].address == address)
+ return table[i].reg;
+ }
+ return -ENOENT;
+}
+
+/* Return temperature from raw value through LPAT table */
+static int raw_to_temp(struct acpi_lpat *lpat, int count, int raw)
+{
+ int i, delta_temp, delta_raw, temp;
+
+ for (i = 0; i < count - 1; i++) {
+ if ((raw >= lpat[i].raw && raw <= lpat[i+1].raw) ||
+ (raw <= lpat[i].raw && raw >= lpat[i+1].raw))
+ break;
+ }
+
+ if (i == count - 1)
+ return -ENOENT;
+
+ delta_temp = lpat[i+1].temp - lpat[i].temp;
+ delta_raw = lpat[i+1].raw - lpat[i].raw;
+ temp = lpat[i].temp + (raw - lpat[i].raw) * delta_temp / delta_raw;
+
+ return temp;
+}
+
+/* Return raw value from temperature through LPAT table */
+static int temp_to_raw(struct acpi_lpat *lpat, int count, int temp)
+{
+ int i, delta_temp, delta_raw, raw;
+
+ for (i = 0; i < count - 1; i++) {
+ if (temp >= lpat[i].temp && temp <= lpat[i+1].temp)
+ break;
+ }
+
+ if (i == count - 1)
+ return -ENOENT;
+
+ delta_temp = lpat[i+1].temp - lpat[i].temp;
+ delta_raw = lpat[i+1].raw - lpat[i].raw;
+ raw = lpat[i].raw + (temp - lpat[i].temp) * delta_raw / delta_temp;
+
+ return raw;
+}
+
+static void
+pmic_thermal_lpat(struct intel_pmic_opregion *opregion, acpi_handle handle,
+ struct device *dev)
+{
+ struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
+ union acpi_object *obj_p, *obj_e;
+ int *lpat, i;
+ acpi_status status;
+
+ status = acpi_evaluate_object(handle, "LPAT", NULL, &buffer);
+ if (ACPI_FAILURE(status))
+ return;
+
+ obj_p = (union acpi_object *)buffer.pointer;
+ if (!obj_p || (obj_p->type != ACPI_TYPE_PACKAGE) ||
+ (obj_p->package.count % 2) || (obj_p->package.count < 4))
+ goto out;
+
+ lpat = devm_kmalloc(dev, sizeof(*lpat) * obj_p->package.count,
+ GFP_KERNEL);
+ if (!lpat)
+ goto out;
+
+ for (i = 0; i < obj_p->package.count; i++) {
+ obj_e = &obj_p->package.elements[i];
+ if (obj_e->type != ACPI_TYPE_INTEGER)
+ goto out;
+ lpat[i] = obj_e->integer.value;
+ }
+
+ opregion->lpat = (struct acpi_lpat *)lpat;
+ opregion->lpat_count = obj_p->package.count / 2;
+
+out:
+ kfree(buffer.pointer);
+}
+
+static acpi_status
+intel_pmic_pmop_handler(u32 function, acpi_physical_address address,
+ u32 bits, u64 *value64, void *handler_context,
+ void *region_context)
+{
+ struct intel_pmic_opregion *opregion = region_context;
+ struct regmap *regmap = opregion->regmap;
+ struct intel_pmic_opregion_data *d = opregion->data;
+ struct pmic_pwr_reg *preg;
+ int result;
+
+ if (bits != 32 || !value64)
+ return AE_BAD_PARAMETER;
+
+ if (function == ACPI_WRITE && !(*value64 == 0 || *value64 == 1))
+ return AE_BAD_PARAMETER;
+
+ preg = pmic_get_pwr_reg(address, d->pwr_table, d->pwr_table_count);
+ if (!preg)
+ return AE_BAD_PARAMETER;
+
+ mutex_lock(&opregion->lock);
+
+ if (function == ACPI_READ)
+ result = d->get_power(regmap, preg, value64);
+ else
+ result = d->update_power(regmap, preg, *value64 == 1);
+
+ mutex_unlock(&opregion->lock);
+
+ return result ? AE_ERROR : AE_OK;
+}
+
+static acpi_status pmic_read_temp(struct intel_pmic_opregion *opregion,
+ int reg, u64 *value)
+{
+ int raw_temp, temp;
+
+ if (!opregion->data->get_raw_temp)
+ return AE_BAD_PARAMETER;
+
+ raw_temp = opregion->data->get_raw_temp(opregion->regmap, reg);
+ if (raw_temp < 0)
+ return AE_ERROR;
+
+ if (!opregion->lpat) {
+ *value = raw_temp;
+ return AE_OK;
+ }
+
+ temp = raw_to_temp(opregion->lpat, opregion->lpat_count, raw_temp);
+ if (temp < 0)
+ return AE_ERROR;
+
+ *value = temp;
+ return AE_OK;
+}
+
+static acpi_status pmic_thermal_temp(struct intel_pmic_opregion *opregion,
+ int reg, u32 function, u64 *value)
+{
+ if (function != ACPI_READ)
+ return AE_BAD_PARAMETER;
+
+ return pmic_read_temp(opregion, reg, value);
+}
+
+static acpi_status pmic_thermal_aux(struct intel_pmic_opregion *opregion,
+ int reg, u32 function, u64 *value)
+{
+ int raw_temp;
+
+ if (function == ACPI_READ)
+ return pmic_read_temp(opregion, reg, value);
+
+ if (!opregion->data->update_aux)
+ return AE_BAD_PARAMETER;
+
+ if (opregion->lpat) {
+ raw_temp = temp_to_raw(opregion->lpat, opregion->lpat_count,
+ *value);
+ if (raw_temp < 0)
+ return AE_ERROR;
+ } else {
+ raw_temp = *value;
+ }
+
+ return opregion->data->update_aux(opregion->regmap, reg, raw_temp) ?
+ AE_ERROR : AE_OK;
+}
+
+static acpi_status pmic_thermal_pen(struct intel_pmic_opregion *opregion,
+ int reg, u32 function, u64 *value)
+{
+ struct intel_pmic_opregion_data *d = opregion->data;
+ struct regmap *regmap = opregion->regmap;
+
+ if (!d->get_policy || !d->update_policy)
+ return AE_BAD_PARAMETER;
+
+ if (function == ACPI_READ)
+ return d->get_policy(regmap, reg, value) ? AE_ERROR : AE_OK;
+
+ if (*value != 0 || *value != 1)
+ return AE_BAD_PARAMETER;
+
+ return d->update_policy(regmap, reg, *value) ? AE_ERROR : AE_OK;
+}
+
+static bool pmic_thermal_is_temp(int address)
+{
+ return (address <= 0x3c) && !(address % 12);
+}
+
+static bool pmic_thermal_is_aux(int address)
+{
+ return (address >= 4 && address <= 0x40 && !((address - 4) % 12)) ||
+ (address >= 8 && address <= 0x44 && !((address - 8) % 12));
+}
+
+static bool pmic_thermal_is_pen(int address)
+{
+ return address >= 0x48 && address <= 0x5c;
+}
+
+static acpi_status
+intel_pmic_thermal_handler(u32 function, acpi_physical_address address,
+ u32 bits, u64 *value64, void *handler_context,
+ void *region_context)
+{
+ struct intel_pmic_opregion *opregion = region_context;
+ int reg;
+ int result;
+
+ if (bits != 32 || !value64)
+ return AE_BAD_PARAMETER;
+
+ reg = pmic_get_thermal_reg(address, opregion->data->thermal_table,
+ opregion->data->thermal_table_count);
+ if (!reg)
+ return AE_BAD_PARAMETER;
+
+ mutex_lock(&opregion->lock);
+
+ result = AE_BAD_PARAMETER;
+ if (pmic_thermal_is_temp(address))
+ result = pmic_thermal_temp(opregion, reg, function, value64);
+ else if (pmic_thermal_is_aux(address))
+ result = pmic_thermal_aux(opregion, reg, function, value64);
+ else if (pmic_thermal_is_pen(address))
+ result = pmic_thermal_pen(opregion, reg, function, value64);
+
+ mutex_unlock(&opregion->lock);
+
+ return result;
+}
+
+int intel_pmic_install_opregion_handler(struct device *dev, acpi_handle handle,
+ struct regmap *regmap,
+ struct intel_pmic_opregion_data *d)
+{
+ acpi_status status;
+ struct intel_pmic_opregion *opregion;
+
+ if (!dev || !regmap || !d)
+ return -EINVAL;
+
+ if (!handle)
+ return -ENODEV;
+
+ opregion = devm_kzalloc(dev, sizeof(*opregion), GFP_KERNEL);
+ if (!opregion)
+ return -ENOMEM;
+
+ mutex_init(&opregion->lock);
+ opregion->regmap = regmap;
+ pmic_thermal_lpat(opregion, handle, dev);
+
+ status = acpi_install_address_space_handler(handle,
+ PMIC_PMOP_OPREGION_ID,
+ intel_pmic_pmop_handler,
+ NULL, opregion);
+ if (ACPI_FAILURE(status))
+ return -ENODEV;
+
+ status = acpi_install_address_space_handler(handle,
+ PMIC_THERMAL_OPREGION_ID,
+ intel_pmic_thermal_handler,
+ NULL, opregion);
+ if (ACPI_FAILURE(status)) {
+ acpi_remove_address_space_handler(handle, PMIC_PMOP_OPREGION_ID,
+ intel_pmic_pmop_handler);
+ return -ENODEV;
+ }
+
+ opregion->data = d;
+ return 0;
+}
+EXPORT_SYMBOL_GPL(intel_pmic_install_opregion_handler);
+
+MODULE_LICENSE("GPL");
diff --git a/drivers/acpi/pmic/intel_pmic.h b/drivers/acpi/pmic/intel_pmic.h
new file mode 100644
index 000000000000..18b9bb80f8b6
--- /dev/null
+++ b/drivers/acpi/pmic/intel_pmic.h
@@ -0,0 +1,34 @@
+#ifndef __INTEL_PMIC_H
+#define __INTEL_PMIC_H
+
+struct pmic_pwr_reg {
+ int reg; /* corresponding PMIC register */
+ int bit; /* control bit for power */
+};
+
+struct pmic_pwr_table {
+ int address; /* operation region address */
+ struct pmic_pwr_reg pwr_reg;
+};
+
+struct pmic_thermal_table {
+ int address; /* operation region address */
+ int reg; /* corresponding thermal register */
+};
+
+struct intel_pmic_opregion_data {
+ int (*get_power)(struct regmap *r, struct pmic_pwr_reg *preg, u64 *value);
+ int (*update_power)(struct regmap *r, struct pmic_pwr_reg *preg, bool on);
+ int (*get_raw_temp)(struct regmap *r, int reg);
+ int (*update_aux)(struct regmap *r, int reg, int raw_temp);
+ int (*get_policy)(struct regmap *r, int reg, u64 *value);
+ int (*update_policy)(struct regmap *r, int reg, int enable);
+ struct pmic_pwr_table *pwr_table;
+ int pwr_table_count;
+ struct pmic_thermal_table *thermal_table;
+ int thermal_table_count;
+};
+
+int intel_pmic_install_opregion_handler(struct device *dev, acpi_handle handle, struct regmap *regmap, struct intel_pmic_opregion_data *d);
+
+#endif
diff --git a/drivers/acpi/pmic/intel_pmic_crc.c b/drivers/acpi/pmic/intel_pmic_crc.c
new file mode 100644
index 000000000000..7629f16d1526
--- /dev/null
+++ b/drivers/acpi/pmic/intel_pmic_crc.c
@@ -0,0 +1,216 @@
+/*
+ * intel_pmic_crc.c - Intel CrystalCove PMIC operation region driver
+ *
+ * Copyright (C) 2014 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/acpi.h>
+#include <linux/mfd/intel_soc_pmic.h>
+#include <linux/regmap.h>
+#include <linux/platform_device.h>
+#include "intel_pmic.h"
+
+#define PWR_SOURCE_SELECT BIT(1)
+
+#define PMIC_A0LOCK_REG 0xc5
+
+static struct pmic_pwr_table pwr_table[] = {
+ {
+ .address = 0x24,
+ .pwr_reg = {
+ .reg = 0x66,
+ .bit = 0x00,
+ },
+ }, /* X285 -> V2P85SX, camara */
+ {
+ .address = 0x48,
+ .pwr_reg = {
+ .reg = 0x5d,
+ .bit = 0x00,
+ },
+ }, /* V18X -> V1P8SX, eMMC/camara/audio */
+};
+
+static struct pmic_thermal_table thermal_table[] = {
+ {
+ .address = 0x00,
+ .reg = 0x75
+ }, /* TMP0 -> SYS0_THRM_RSLT_L */
+ {
+ .address = 0x04,
+ .reg = 0x95
+ }, /* AX00 -> SYS0_THRMALRT0_L */
+ {
+ .address = 0x08,
+ .reg = 0x97
+ }, /* AX01 -> SYS0_THRMALRT1_L */
+ {
+ .address = 0x0c,
+ .reg = 0x77
+ }, /* TMP1 -> SYS1_THRM_RSLT_L */
+ {
+ .address = 0x10,
+ .reg = 0x9a
+ }, /* AX10 -> SYS1_THRMALRT0_L */
+ {
+ .address = 0x14,
+ .reg = 0x9c
+ }, /* AX11 -> SYS1_THRMALRT1_L */
+ {
+ .address = 0x18,
+ .reg = 0x79
+ }, /* TMP2 -> SYS2_THRM_RSLT_L */
+ {
+ .address = 0x1c,
+ .reg = 0x9f
+ }, /* AX20 -> SYS2_THRMALRT0_L */
+ {
+ .address = 0x20,
+ .reg = 0xa1
+ }, /* AX21 -> SYS2_THRMALRT1_L */
+ {
+ .address = 0x48,
+ .reg = 0x94
+ }, /* PEN0 -> SYS0_THRMALRT0_H */
+ {
+ .address = 0x4c,
+ .reg = 0x99
+ }, /* PEN1 -> SYS1_THRMALRT1_H */
+ {
+ .address = 0x50,
+ .reg = 0x9e
+ }, /* PEN2 -> SYS2_THRMALRT2_H */
+};
+
+static int intel_crc_pmic_get_power(struct regmap *regmap,
+ struct pmic_pwr_reg *preg, u64 *value)
+{
+ int data;
+
+ if (regmap_read(regmap, preg->reg, &data))
+ return -EIO;
+
+ *value = (data & PWR_SOURCE_SELECT) && (data & BIT(preg->bit)) ? 1 : 0;
+ return 0;
+}
+
+static int intel_crc_pmic_update_power(struct regmap *regmap,
+ struct pmic_pwr_reg *preg, bool on)
+{
+ int data;
+
+ if (regmap_read(regmap, preg->reg, &data))
+ return -EIO;
+
+ if (on) {
+ data |= PWR_SOURCE_SELECT | BIT(preg->bit);
+ } else {
+ data &= ~BIT(preg->bit);
+ data |= PWR_SOURCE_SELECT;
+ }
+
+ if (regmap_write(regmap, preg->reg, data))
+ return -EIO;
+ return 0;
+}
+
+/* Raw temperature value is 10bits: 8bits in reg and 2bits in reg-1 bit0,1 */
+static int intel_crc_pmic_get_raw_temp(struct regmap *regmap, int reg)
+{
+ int temp_l, temp_h;
+
+ if (regmap_read(regmap, reg, &temp_l) ||
+ regmap_read(regmap, reg - 1, &temp_h))
+ return -EIO;
+
+ return (temp_l | ((temp_h & 0x3) << 8));
+}
+
+static int
+intel_crc_pmic_update_aux(struct regmap *regmap, int reg, int raw)
+{
+ if (regmap_write(regmap, reg, raw) ||
+ regmap_update_bits(regmap, reg - 1, 0x3, raw >> 8))
+ return -EIO;
+
+ return 0;
+}
+
+static int
+intel_crc_pmic_get_policy(struct regmap *regmap, int reg, u64 *value)
+{
+ int pen;
+
+ if (regmap_read(regmap, reg, &pen))
+ return -EIO;
+ *value = pen >> 7;
+ return 0;
+}
+
+static int intel_crc_pmic_update_policy(struct regmap *regmap,
+ int reg, int enable)
+{
+ int alert0;
+
+ /* Update to policy enable bit requires unlocking a0lock */
+ if (regmap_read(regmap, PMIC_A0LOCK_REG, &alert0))
+ return -EIO;
+ if (regmap_update_bits(regmap, PMIC_A0LOCK_REG, 0x01, 0))
+ return -EIO;
+
+ if (regmap_update_bits(regmap, reg, 0x80, enable << 7))
+ return -EIO;
+
+ /* restore alert0 */
+ if (regmap_write(regmap, PMIC_A0LOCK_REG, alert0))
+ return -EIO;
+
+ return 0;
+}
+
+static struct intel_pmic_opregion_data intel_crc_pmic_opregion_data = {
+ .get_power = intel_crc_pmic_get_power,
+ .update_power = intel_crc_pmic_update_power,
+ .get_raw_temp = intel_crc_pmic_get_raw_temp,
+ .update_aux = intel_crc_pmic_update_aux,
+ .get_policy = intel_crc_pmic_get_policy,
+ .update_policy = intel_crc_pmic_update_policy,
+ .pwr_table = pwr_table,
+ .pwr_table_count= ARRAY_SIZE(pwr_table),
+ .thermal_table = thermal_table,
+ .thermal_table_count = ARRAY_SIZE(thermal_table),
+};
+
+static int intel_crc_pmic_opregion_probe(struct platform_device *pdev)
+{
+ struct intel_soc_pmic *pmic = dev_get_drvdata(pdev->dev.parent);
+ return intel_pmic_install_opregion_handler(&pdev->dev,
+ ACPI_HANDLE(pdev->dev.parent), pmic->regmap,
+ &intel_crc_pmic_opregion_data);
+}
+
+static struct platform_driver intel_crc_pmic_opregion_driver = {
+ .probe = intel_crc_pmic_opregion_probe,
+ .driver = {
+ .name = "crystal_cove_region",
+ },
+};
+
+static int __init intel_crc_pmic_opregion_driver_init(void)
+{
+ return platform_driver_register(&intel_crc_pmic_opregion_driver);
+}
+module_init(intel_crc_pmic_opregion_driver_init);
+
+MODULE_DESCRIPTION("CrystalCove ACPI opration region driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/mfd/intel_soc_pmic_crc.c b/drivers/mfd/intel_soc_pmic_crc.c
index 7107cab832e6..48845d636bba 100644
--- a/drivers/mfd/intel_soc_pmic_crc.c
+++ b/drivers/mfd/intel_soc_pmic_crc.c
@@ -106,6 +106,9 @@ static struct mfd_cell crystal_cove_dev[] = {
.num_resources = ARRAY_SIZE(gpio_resources),
.resources = gpio_resources,
},
+ {
+ .name = "crystal_cove_region",
+ },
};

static struct regmap_config crystal_cove_regmap_config = {
--
1.9.3

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/