Re: [PATCH v4 2/2] iio: vadc: Qualcomm SPMI PMIC voltage ADC driver

[Jonathan Cameron]

On 18/11/14 08:23, Ivan T. Ivanov wrote:
> 
> On Mon, 2014-11-17 at 23:12 +0100, Hartmut Knaack wrote:
>> Ivan T. Ivanov schrieb am 12.11.2014 09:55:
>>> On Tue, 2014-11-11 at 23:39 +0100, Hartmut Knaack wrote:
>>>> Ivan T. Ivanov schrieb am 11.11.2014 09:21:
>>>>> Hi Hartmut,
>>>>>
>>>>> On Mon, 2014-11-10 at 22:11 +0100, Hartmut Knaack wrote:
>>>>>> Ivan T. Ivanov schrieb am 03.11.2014 16:24:
>>>>>>> From: Stanimir Varbanov <svarbanov@xxxxxxxxxx>
>>>>>>>
>>>>>>> The voltage ADC is peripheral of Qualcomm SPMI PMIC chips. It has
>>>>>>> 15 bits resolution and register space inside PMIC accessible across
>>>>>>> SPMI bus.
>>>>>>>
>>>>>>> The vadc driver registers itself through IIO interface.
>>>>>> Reviewing again, I got the feeling that due to the complexity of adc reads (writing to
>>>>>> register
>>>>>> to start conversion, waiting a decent time for the conversion to complete, reading the
>>>>>> result),
>>>>>> it would be beneficial to use a mutex in vadc_read_raw or its depending functions.
>>>>>
>>>>> Hm, yes, but there is such a nice info_exist_lock :-) in core functions,
>>>>> which in practice serve the same purpose.
>>>> I seem to miss that. Please point me in the right direction.
>>>
>>> I am referring to info_exist_lock mutex part of struct iio_dev.
>>> It protects all operations inkern.c, no?
>>>
>> Good point, thanks for helping me there.
> 
> I was wondering, is there a plan to improve this part of the code? 
No one is working on it that I know of.  All patches welcome!
> I mean to remove per device lock and use something like try_module_get(),
> when clients are acquiring reference to iio channel? 
That might indeed provide a more elegant solution...
(the things I don't know exist never fail to surprise me!)
> 
>>>>>>> +
>>>>>>> +       ret = of_property_read_u32(node, "reg", &res);
>>>>>> For u16, there would be of_property_read_u16().
>>>>>>> +       if (ret < 0)
>>>>>>> +       return -ENODEV;
>>>>>> Just return ret here?
>>>>>
>>>>> I am usually trying to follow these recommendations[1]. In practice driver
>>>>> core cares only for EPROBE_DEFER, ENODEV and ENXIO, while of_property_read_u32()
>>>>> can return ENODATA and EOVERFLOW, which did't not make sense for the core.
>>>> Please point me in the right direction on this one, too. It is pretty common to pass error 
>>>> codes
>>>> up, as it is also mentioned in [1].
>>>
>>> Yes, I know that is common to just pass error codes up, but in this case it did't
>>> make too much sense, I think. Also take a look at realy_probe() and line 343.
>> This doesn't convince me. Actually, within the probe_failed part, it just doesn't care about 
>> ENODEV and ENXIO as long as debug messages are disabled (which apart from some developers, is 
>> default for the vast majority of devices). For all other error codes, it will at least print an 
>> info or warning about what's going wrong (and that can be a lot of help for debugging).
> 
> Well, if you insist... will change it.
> 
> Thanks, 
> Ivan
> --
> To unsubscribe from this list: send the line "unsubscribe linux-iio" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/