[PATCH RFC v2 10/12] drivers: soc: samsung: Add support for clock enabling in power domain
From: Amit Daniel Kachhap
Date: Mon Nov 24 2014 - 08:20:41 EST
While turning power domain to on/off, some clocks need to be enabled
in the Exynos7 SOC. This patch adds the framework for enabling those
clocks before on/off and restoring it back after the operation. Also
these list of clocks may be different for on/off operation so not using
the generic pm domain suspend/resume interface.
Signed-off-by: Amit Daniel Kachhap <amit.daniel@xxxxxxxxxxx>
---
.../bindings/arm/exynos/power_domain.txt | 12 ++
drivers/soc/samsung/pm_domains.c | 138 +++++++++++++++++++-
2 files changed, 146 insertions(+), 4 deletions(-)
diff --git a/Documentation/devicetree/bindings/arm/exynos/power_domain.txt b/Documentation/devicetree/bindings/arm/exynos/power_domain.txt
index 8d913b9..c48769e 100644
--- a/Documentation/devicetree/bindings/arm/exynos/power_domain.txt
+++ b/Documentation/devicetree/bindings/arm/exynos/power_domain.txt
@@ -24,6 +24,14 @@ Optional Properties:
- pclkN, clkN: Pairs of parent of input clock and input clock to the
devices in this power domain.
Maximum of 10 sets (N = 0 to 9) are supported.
+- pd-on-en-clocks: List of clock handles. These clocks are required to enabled
+ before turning on a power domain.
+- pd-on-en-clock-names: clocks can be specified as,
+ - clkN: N can vary between 0-30.
+- pd-off-en-clocks: List of clock handles. These clocks are required to enabled
+ before turning off a power domain.
+- pd-off-en-clock-names: clocks can be specified as,
+ - clkN: N can vary between 0-30.
- parents: phandle of parent power domains.
Node of a device using power domains must have a samsung,power-domain property
@@ -43,6 +51,10 @@ Example:
pd-parent-clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MOUT_SW_ACLK333>,
<&clock CLK_MOUT_USER_ACLK333>;
pd-parent-clock-names = "tclk0", "pclk0", "clk0";
+ pd-on-en-clocks = <&clock CLK_IP1>, <&clock CLK_IP2>,
+ pd-on-en-clock-names = "clk0", "clk1";
+ pd-off-en-clocks = <&clock CLK_IP1>, <&clock CLK_IP2>,
+ pd-off-en-clock-names = "clk0", "clk1";
#power-domain-cells = <0>;
};
diff --git a/drivers/soc/samsung/pm_domains.c b/drivers/soc/samsung/pm_domains.c
index 96196f8..5407eb7 100644
--- a/drivers/soc/samsung/pm_domains.c
+++ b/drivers/soc/samsung/pm_domains.c
@@ -18,6 +18,7 @@
#include <linux/slab.h>
#include <linux/pm_domain.h>
#include <linux/clk.h>
+#include <linux/clk-provider.h>
#include <linux/delay.h>
#include <linux/of_address.h>
#include <linux/of_platform.h>
@@ -29,6 +30,12 @@
static struct exynos_pmu_pd_ops *pd_ops;
+struct clk_enable_list {
+ struct clk **clks;
+ unsigned int count;
+ unsigned int en_status;
+};
+
struct clk_parent_list {
struct clk **clks;
struct clk **parent_clks;
@@ -44,6 +51,8 @@ struct exynos_pm_domain {
char const *name;
bool is_off;
struct generic_pm_domain pd;
+ struct clk_enable_list *clk_pd_on;
+ struct clk_enable_list *clk_pd_off;
struct clk_parent_list *clk_parent;
};
@@ -72,6 +81,55 @@ static struct clk *exynos_pd_clk_get(struct device_node *np,
return clk;
}
+static int pd_init_enable_clocks(struct platform_device *pdev,
+ struct device_node *np, bool on, struct exynos_pm_domain *pd)
+{
+ struct clk_enable_list *list;
+ char propname[32], clk_name[8];
+ int count, i;
+ struct clk *clk = ERR_PTR(-ENOENT);
+
+ list = devm_kzalloc(&pdev->dev, sizeof(*list), GFP_KERNEL);
+ if (!list)
+ return -ENOMEM;
+
+ if (on) {
+ pd->clk_pd_on = list;
+ snprintf(propname, sizeof(propname), "pd-on-en-clock-names");
+ } else {
+ pd->clk_pd_off = list;
+ snprintf(propname, sizeof(propname), "pd-off-en-clock-names");
+ }
+
+ count = of_property_count_strings(np, propname);
+ if (!count || count > MAX_CLK_PER_DOMAIN)
+ return -EINVAL;
+
+ list->count = count;
+ list->clks = devm_kzalloc(&pdev->dev, sizeof(*list->clks) * count,
+ GFP_KERNEL);
+ if (!list->clks)
+ return -ENOMEM;
+
+ if (on)
+ snprintf(propname, sizeof(propname), "pd-on-en");
+ else
+ snprintf(propname, sizeof(propname), "pd-off-en");
+
+ for (i = 0; i < count; i++) {
+ snprintf(clk_name, sizeof(clk_name), "clk%d", i);
+ clk = exynos_pd_clk_get(np, propname, clk_name);
+ if (IS_ERR(clk)) {
+ dev_err(&pdev->dev, "%s clock not found\n", clk_name);
+ return -EINVAL;
+ }
+ list->clks[i] = clk;
+ }
+ dev_info(&pdev->dev, "pd %s enable clocks initialised\n",
+ on ? "on" : "off");
+ return 0;
+}
+
static int pd_init_parent_clocks(struct platform_device *pdev,
struct device_node *np, struct exynos_pm_domain *pd)
{
@@ -140,25 +198,67 @@ static int pd_init_parent_clocks(struct platform_device *pdev,
return 0;
}
+static void exynos_pd_poweron_prepare(struct exynos_pm_domain *pd)
+{
+ struct clk_enable_list *en_list;
+ int i;
+
+ en_list = pd->clk_pd_on;
+ if (!en_list)
+ return;
+
+ /* Enable the necessary clocks not enabled and update the status */
+ for (i = 0; i < en_list->count; i++) {
+ if (__clk_is_enabled(en_list->clks[i]))
+ continue;
+ clk_enable(en_list->clks[i]);
+ en_list->en_status |= (1 << i);
+ }
+}
+
static void exynos_pd_post_poweron(struct exynos_pm_domain *pd)
{
struct clk_parent_list *p_list;
+ struct clk_enable_list *en_list;
int i;
p_list = pd->clk_parent;
- if (!p_list)
+ if (p_list) {
+ /* Set the parents clocks correctly */
+ for (i = 0; i < p_list->count; i++)
+ clk_set_parent(p_list->clks[i], p_list->parent_clks[i]);
+ }
+
+ en_list = pd->clk_pd_on;
+ if (!en_list)
return;
- /* Set the parents clocks correctly */
- for (i = 0; i < p_list->count; i++)
- clk_set_parent(p_list->clks[i], p_list->parent_clks[i]);
+ /* Disable the clocks enabled during power off preperation */
+ for (i = 0; i < en_list->count; i++) {
+ if (!(en_list->en_status & (1 << i)))
+ continue;
+ clk_disable(en_list->clks[i]);
+ en_list->en_status &= ~(1 << i);
+ }
}
static void exynos_pd_poweroff_prepare(struct exynos_pm_domain *pd)
{
struct clk_parent_list *p_list;
+ struct clk_enable_list *en_list;
int i;
+ en_list = pd->clk_pd_off;
+ if (en_list) {
+ /* Enable the clocks not enabled and update the status */
+ for (i = 0; i < en_list->count; i++) {
+ if (__clk_is_enabled(en_list->clks[i]))
+ continue;
+ clk_enable(en_list->clks[i]);
+ en_list->en_status |= (1 << i);
+ }
+ }
+
p_list = pd->clk_parent;
if (!p_list)
return;
@@ -168,12 +268,31 @@ static void exynos_pd_poweroff_prepare(struct exynos_pm_domain *pd)
clk_set_parent(p_list->clks[i], p_list->trans_clks[i]);
}
+static void exynos_pd_post_poweroff(struct exynos_pm_domain *pd)
+{
+ struct clk_enable_list *en_list;
+ int i;
+
+ en_list = pd->clk_pd_off;
+ if (!en_list)
+ return;
+
+ /* Disable the clocks enabled during power off preperation */
+ for (i = 0; i < en_list->count; i++) {
+ if (!(en_list->en_status & (1 << i)))
+ continue;
+ clk_disable(en_list->clks[i]);
+ en_list->en_status &= ~(1 << i);
+ }
+}
+
static int exynos_pd_power_on(struct generic_pm_domain *domain)
{
int ret = 0;
struct exynos_pm_domain *pd;
pd = container_of(domain, struct exynos_pm_domain, pd);
+ exynos_pd_poweron_prepare(pd);
ret = pd_ops->pd_on(domain->name, pd->base);
if (ret)
return ret;
@@ -189,6 +308,9 @@ static int exynos_pd_power_off(struct generic_pm_domain *domain)
pd = container_of(domain, struct exynos_pm_domain, pd);
exynos_pd_poweroff_prepare(pd);
ret = pd_ops->pd_off(domain->name, pd->base);
+ if (ret)
+ return ret;
+ exynos_pd_post_poweroff(pd);
return ret;
}
@@ -232,6 +354,14 @@ static int exynos_power_domain_probe(struct platform_device *pdev)
pd->pd.power_off = exynos_pd_power_off;
pd->pd.power_on = exynos_pd_power_on;
+ if (of_find_property(np, "pd-on-en-clocks", NULL))
+ if (pd_init_enable_clocks(pdev, np, true, pd))
+ return -EINVAL;
+
+ if (of_find_property(np, "pd-off-en-clocks", NULL))
+ if (pd_init_enable_clocks(pdev, np, false, pd))
+ return -EINVAL;
+
if (of_find_property(np, "pd-parent-clocks", NULL))
if (pd_init_parent_clocks(pdev, np, pd))
return -EINVAL;
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/