NO_HZ_FULL still getting jitter ~ every 33 ms

[Konstantin Dmitriev]

I've recompiled the 3.16.7 kernel with the NO_HZ_FULL option enabled
and /proc/interrupts shows roughly 1 tick every 3 seconds on an
isolated core and a process affined to a core

I still see jitter though. Obtaining TSC values in a tight loop
reports 5-20 usecs latencies  approximately 30 times per second

Unfortunately ftrace does not show anything unusual - I can see
apic_timer_interrupt fires every 2.5 seconds followed by the
reschedule in approx 0.5 seconds but nothing in between

perf also does not show anything of interest apart from an unusually
high LLC miss rate

If it is of any help the jitter seems to be evenly spread over 1 sec interval

Please suggest what else to look for

Regards
Konstantin
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/