Re: [PATCH V2 1/2] pinctrl: exynos: Add BUS1 pin controller for exynos7

[Alim Akhtar]

Hi Vivek,

On Mon, Nov 24, 2014 at 6:32 PM, Vivek Gautam <gautam.vivek@xxxxxxxxxxx> wrote:
> USB and Power regulator on Exynos7 require gpios available
> in BUS1 pin controller block.
> So adding the BUS1 pinctrl support.
>
> Signed-off-by: Naveen Krishna Ch <naveenkrishna.ch@xxxxxxxxx>
> Signed-off-by: Vivek Gautam <gautam.vivek@xxxxxxxxxxx>
> Cc: Linus Walleij <linus.walleij@xxxxxxxxxx>
> ---
Looks good to me.
Thanks!

Reviewed-by: Alim Akhtar <alim.akhtar@xxxxxxxxxxx>

>
> This patch was part of series:
> "[PATCH 00/11] Exynos7: Adding USB 3.0 support"
>  https://lkml.org/lkml/2014/11/21/247
>
> Changes since V1:
>  - Added support for all pin banks which are part of BUS1 pin controller.
>
>  drivers/pinctrl/samsung/pinctrl-exynos.c |   19 +++++++++++++++++++
>  1 file changed, 19 insertions(+)
>
> diff --git a/drivers/pinctrl/samsung/pinctrl-exynos.c b/drivers/pinctrl/samsung/pinctrl-exynos.c
> index d5d4cfc..44e60dc 100644
> --- a/drivers/pinctrl/samsung/pinctrl-exynos.c
> +++ b/drivers/pinctrl/samsung/pinctrl-exynos.c
> @@ -1300,6 +1300,20 @@ static const struct samsung_pin_bank_data exynos7_pin_banks7[] __initconst = {
>         EXYNOS_PIN_BANK_EINTG(8, 0x060, "gpr3", 0x0c),
>  };
>
> +/* pin banks of exynos7 pin-controller - BUS1 */
> +static const struct samsung_pin_bank_data exynos7_pin_banks8[] __initconst = {
> +       EXYNOS_PIN_BANK_EINTG(8, 0x020, "gpf0", 0x00),
> +       EXYNOS_PIN_BANK_EINTG(8, 0x040, "gpf1", 0x04),
> +       EXYNOS_PIN_BANK_EINTG(4, 0x060, "gpf2", 0x08),
> +       EXYNOS_PIN_BANK_EINTG(5, 0x080, "gpf3", 0x0c),
> +       EXYNOS_PIN_BANK_EINTG(8, 0x0a0, "gpf4", 0x10),
> +       EXYNOS_PIN_BANK_EINTG(8, 0x0c0, "gpf5", 0x14),
> +       EXYNOS_PIN_BANK_EINTG(5, 0x0e0, "gpg1", 0x18),
> +       EXYNOS_PIN_BANK_EINTG(5, 0x100, "gpg2", 0x1c),
> +       EXYNOS_PIN_BANK_EINTG(6, 0x120, "gph1", 0x20),
> +       EXYNOS_PIN_BANK_EINTG(3, 0x140, "gpv6", 0x24),
> +};
> +
>  const struct samsung_pin_ctrl exynos7_pin_ctrl[] __initconst = {
>         {
>                 /* pin-controller instance 0 Alive data */
> @@ -1342,5 +1356,10 @@ const struct samsung_pin_ctrl exynos7_pin_ctrl[] __initconst = {
>                 .pin_banks      = exynos7_pin_banks7,
>                 .nr_banks       = ARRAY_SIZE(exynos7_pin_banks7),
>                 .eint_gpio_init = exynos_eint_gpio_init,
> +       }, {
> +               /* pin-controller instance 8 BUS1 data */
> +               .pin_banks      = exynos7_pin_banks8,
> +               .nr_banks       = ARRAY_SIZE(exynos7_pin_banks8),
> +               .eint_gpio_init = exynos_eint_gpio_init,
>         },
>  };
> --
> 1.7.10.4
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at  http://vger.kernel.org/majordomo-info.html



-- 
Regards,
Alim
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/