pull request: wireless 2014-11-26

From: John W. Linville
Date: Wed Nov 26 2014 - 16:36:17 EST

Dave,

Please pull this little batch of fixes intended for the 3.18 stream...

For the iwlwifi one, Emmanuel says:

"Not all the firmware know how to handle the HOT_SPOT_CMD.
Make sure that the firmware will know this command before
sending it. This avoids a firmware crash."

Along with that, Larry sends a pair of rtlwifi fixes to address some
discrepancies from moving drivers out of staging. Larry says:

"These two patches are needed to fix a regression introduced when
driver rtl8821ae was moved from staging to the regular wireless tree."

Please let me know if there are problems!

Thanks,

John

---

The following changes since commit a1d69c60c44134f64945bbf6a6dfda22eaf4a214:

brcmfmac: don't include linux/unaligned/access_ok.h (2014-11-20 14:46:45 -0500)

are available in the git repository at:

git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless.git tags/master-2014-11-25

for you to fetch changes up to 7d63a5f9b25ba6b130da8eb2d32a72b1462d0249:

rtlwifi: Change order in device startup (2014-11-25 14:22:22 -0500)

----------------------------------------------------------------
John W. Linville (1):
Merge tag 'iwlwifi-for-john-2014-11-23' of git://git.kernel.org/.../iwlwifi/iwlwifi-fixes

Larry Finger (2):
rtlwifi: rtl8821ae: Fix 5G detection problem
rtlwifi: Change order in device startup

Luciano Coelho (1):
iwlwifi: mvm: check TLV flag before trying to use hotspot firmware commands

drivers/net/wireless/iwlwifi/iwl-fw.h | 2 ++
drivers/net/wireless/iwlwifi/mvm/mac80211.c | 12 +++++++++---
drivers/net/wireless/rtlwifi/pci.c | 20 ++++++++++----------
drivers/net/wireless/rtlwifi/rtl8821ae/hw.c | 5 +++--
4 files changed, 24 insertions(+), 15 deletions(-)

diff --git a/drivers/net/wireless/iwlwifi/iwl-fw.h b/drivers/net/wireless/iwlwifi/iwl-fw.h
index 4f6e66892acc..b894a84e8393 100644
--- a/drivers/net/wireless/iwlwifi/iwl-fw.h
+++ b/drivers/net/wireless/iwlwifi/iwl-fw.h
@@ -155,6 +155,7 @@ enum iwl_ucode_tlv_api {
* @IWL_UCODE_TLV_CAPA_QUIET_PERIOD_SUPPORT: supports Quiet Period requests
* @IWL_UCODE_TLV_CAPA_DQA_SUPPORT: supports dynamic queue allocation (DQA),
* which also implies support for the scheduler configuration command
+ * @IWL_UCODE_TLV_CAPA_HOTSPOT_SUPPORT: supports Hot Spot Command
*/
enum iwl_ucode_tlv_capa {
IWL_UCODE_TLV_CAPA_D0I3_SUPPORT = BIT(0),
@@ -163,6 +164,7 @@ enum iwl_ucode_tlv_capa {
IWL_UCODE_TLV_CAPA_WFA_TPC_REP_IE_SUPPORT = BIT(10),
IWL_UCODE_TLV_CAPA_QUIET_PERIOD_SUPPORT = BIT(11),
IWL_UCODE_TLV_CAPA_DQA_SUPPORT = BIT(12),
+ IWL_UCODE_TLV_CAPA_HOTSPOT_SUPPORT = BIT(18),
};

/* The default calibrate table size if not specified by firmware file */
diff --git a/drivers/net/wireless/iwlwifi/mvm/mac80211.c b/drivers/net/wireless/iwlwifi/mvm/mac80211.c
index b62405865b25..b6d2683da3a9 100644
--- a/drivers/net/wireless/iwlwifi/mvm/mac80211.c
+++ b/drivers/net/wireless/iwlwifi/mvm/mac80211.c
@@ -2448,9 +2448,15 @@ static int iwl_mvm_roc(struct ieee80211_hw *hw,

switch (vif->type) {
case NL80211_IFTYPE_STATION:
- /* Use aux roc framework (HS20) */
- ret = iwl_mvm_send_aux_roc_cmd(mvm, channel,
- vif, duration);
+ if (mvm->fw->ucode_capa.capa[0] &
+ IWL_UCODE_TLV_CAPA_HOTSPOT_SUPPORT) {
+ /* Use aux roc framework (HS20) */
+ ret = iwl_mvm_send_aux_roc_cmd(mvm, channel,
+ vif, duration);
+ goto out_unlock;
+ }
+ IWL_ERR(mvm, "hotspot not supported\n");
+ ret = -EINVAL;
goto out_unlock;
case NL80211_IFTYPE_P2P_DEVICE:
/* handle below */
diff --git a/drivers/net/wireless/rtlwifi/pci.c b/drivers/net/wireless/rtlwifi/pci.c
index 61f5d36eca6a..846a2e6e34d8 100644
--- a/drivers/net/wireless/rtlwifi/pci.c
+++ b/drivers/net/wireless/rtlwifi/pci.c
@@ -2249,6 +2249,16 @@ int rtl_pci_probe(struct pci_dev *pdev,
/*like read eeprom and so on */
rtlpriv->cfg->ops->read_eeprom_info(hw);

+ if (rtlpriv->cfg->ops->init_sw_vars(hw)) {
+ RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "Can't init_sw_vars\n");
+ err = -ENODEV;
+ goto fail3;
+ }
+ rtlpriv->cfg->ops->init_sw_leds(hw);
+
+ /*aspm */
+ rtl_pci_init_aspm(hw);
+
/* Init mac80211 sw */
err = rtl_init_core(hw);
if (err) {
@@ -2264,16 +2274,6 @@ int rtl_pci_probe(struct pci_dev *pdev,
goto fail3;
}

- if (rtlpriv->cfg->ops->init_sw_vars(hw)) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "Can't init_sw_vars\n");
- err = -ENODEV;
- goto fail3;
- }
- rtlpriv->cfg->ops->init_sw_leds(hw);
-
- /*aspm */
- rtl_pci_init_aspm(hw);
-
err = ieee80211_register_hw(hw);
if (err) {
RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
diff --git a/drivers/net/wireless/rtlwifi/rtl8821ae/hw.c b/drivers/net/wireless/rtlwifi/rtl8821ae/hw.c
index 310d3163dc5b..8ec8200002c7 100644
--- a/drivers/net/wireless/rtlwifi/rtl8821ae/hw.c
+++ b/drivers/net/wireless/rtlwifi/rtl8821ae/hw.c
@@ -3672,8 +3672,9 @@ static void rtl8821ae_update_hal_rate_mask(struct ieee80211_hw *hw,
mac->opmode == NL80211_IFTYPE_ADHOC)
macid = sta->aid + 1;
if (wirelessmode == WIRELESS_MODE_N_5G ||
- wirelessmode == WIRELESS_MODE_AC_5G)
- ratr_bitmap = sta->supp_rates[NL80211_BAND_5GHZ];
+ wirelessmode == WIRELESS_MODE_AC_5G ||
+ wirelessmode == WIRELESS_MODE_A)
+ ratr_bitmap = sta->supp_rates[NL80211_BAND_5GHZ] << 4;
else
ratr_bitmap = sta->supp_rates[NL80211_BAND_2GHZ];

--
John W. Linville Someday the world will need a hero, and you
linville@xxxxxxxxxxxxx might be all we have. Be ready.

Attachment: pgpJ8wVPSrewi.pgp
Description: PGP signature