Re: [PATCH v2 3/4] thermal: of: Extend of-thermal to export table of trip points

From: navneet kumar
Date: Wed Nov 26 2014 - 18:12:17 EST

Next message: Heiko Stübner: "Re: [PATCH] clk: rockchip: rk3288 export i2s0_clkout for use in DT"
Previous message: tip-bot for Jiang Liu: "[tip:x86/apic] x86, irq: Use hierarchy irqdomain to manage DMAR interrupts"
In reply to: Guenter Roeck: "Re: [PATCH v2 3/4] thermal: of: Extend of-thermal to export table of trip points"
Next in thread: Eduardo Valentin: "Re: [PATCH v2 3/4] thermal: of: Extend of-thermal to export table of trip points"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

On 11/26/2014 01:12 PM, Guenter Roeck wrote:
> On 11/26/2014 12:43 PM, navneet kumar wrote:
>>
>> Hi Eduardo, Lukasz,
>>
>> [Combining my concerns as a single text blob here]
>>
>> I. Firstly, with the current patch
>> 1. is it really needed to duplicate the struct thermal_trip? Why
>> don’t
>> we get rid of the __thermal_trip and stay with the 'thermal_trip'
>> ? it
>> is not a big change.
>>
>> 2. gtrips is not updated on "set_trip_temp" etc. actions via
>> sysfs. (am
>> I missing something?).
>>
>> II. The other concern is more of a design question
>> 1. Do we intend to keep the of-thermal as a middle layer between the
>> thermal_core and the sensor device? OR, is the role of of-thermal
>> just
>> to parse the DT and opt out ? currently of-thermal is somewhat a
>> hybrid
>> of these as, in addition to parsing the dt, it holds on to the data
>> related to trip points etc. etc.
>>
>> 2. assuming latter is true (OF is just a dt parser helper): we should
>> not be adding more intelligence and dependencies linked to the OF.
>>
>> 3. assuming former is true (OF is a well-defined middle layer):
>> All is
>> good till the point OF maintains the trip points (which is a good
>> thing
>> since, OF caches on to the data); BUT, if we expose this
>> information to
>> the sensor device too (as this patch is doing),
>>
>> 3a. we violate the layering principle :-)
>>
>> 3b. more importantly, this is all just excessive logic that we
>> put in which *could be useful* only if we intend to extend the
>> role of OF as a trip point management layer that does more than
>> just holding on to the data. This may include -
>>
>> -> The sensor devices to know nothing about the
>> trip_points, instead the sensor devices would work on
>> "temperature thresholds" and OF would map sensor
>> thresholds to the actual trip points as needed
>> (configured from DT); while the sensor devices stick to
>> using "thresholds".
>>
>> -> Queuing from above, sensors, most of the time, only
>> need to know a high and a low temp threshold; which
>> essentially is a subset of the active/passive etc. trip
>> points. Calculation of that based on the current temp,
>> as of today is replicated across all the sensor drivers
>> and can be hoisted up to the of-thermal.
>>
>
> Sorry, lost you here. What replicated calculation do you refer to ?
>
> Thanks,
> Guenter
>
Some sensors have an ability to generate interrupts based upon a configured high
and low temp thresholds/values. Once any of these limits is crossed, the sensor
hardware has to be reconfigured with a new set of such values.

I'll try to explain with an example -
consider trip points TP1, TP2, TP3, TP4 sorted as low to high; and the current
temp T1 such that -
TP2<T1<TP3

With the conditions as is, and assuming the interrupts have been configured, an
interrupt will trigger if T1 goes below TP2 or exceeds TP3.

Now, say, T1 crosses TP3, the sensor hardware generates an interrupt (avoids polling
on the zone temp). Furthermore, we require that the new limits for the interrupts
be TP3 and TP4 for 'low' and 'high' thresholds interrupts
respectively, such that an interrupt will be fired when temp goes below TP3 or
exceeds TP4.

Above case is when the temp crosses a set of High-low. The same situation may
occur when a trip point temp is changed from sysfs, in which case, the thresholds
for configuring the interrupts may have to be reconfigured.

Today, the sensors find the high-low thresholds by -
1. querying the temp from the thermal_zone
2. traversing the trip points (which may have been cached locally by the sensor),
and figuring out the high/low temperature thresholds.

These above steps aka 'replicated calculation'.

Whatever the case may be, the real question is the role and scope of of-thermal.

>> Seems like this is the opportune time to make a call about the role of
>> of-thermal?
>>
>> On 11/26/2014 07:18 AM, Eduardo Valentin wrote:
>>> * PGP Signed by an unknown key
>>>
>>> Hello,
>>>
>>> On Wed, Nov 26, 2014 at 09:35:10AM +0100, Lukasz Majewski wrote:
>>>> Hi Eduardo,
>>>>
>>>>> Hello Lukasz,
>>>>>
>>>>> On Thu, Nov 20, 2014 at 05:21:27PM +0100, Lukasz Majewski wrote:
>>>>>> This patch extends the of-thermal.c to export copy of trip points
>>>>>> for a given thermal zone.
>>>>>>
>>>>>> Thermal drivers should use of_thermal_get_trip_points() method to
>>>>>> get pointer to table of thermal trip points.
>>>>>>
>>>>>> Signed-off-by: Lukasz Majewski <l.majewski@xxxxxxxxxxx>
>>>>>> ---
>>>>>> Changes for v2:
>>>>>> - New patch - as suggested by Eduardo Valentin
>>>>>> ---
>>>>>> drivers/thermal/of-thermal.c | 33
>>>>>> +++++++++++++++++++++++++++++++++ drivers/thermal/thermal_core.h |
>>>>>> 7 +++++++ include/linux/thermal.h | 14 ++++++++++++++
>>>>>> 3 files changed, 54 insertions(+)
>>>>>>
>>>>>> diff --git a/drivers/thermal/of-thermal.c
>>>>>> b/drivers/thermal/of-thermal.c index 336af7f..33921c5 100644
>>>>>> --- a/drivers/thermal/of-thermal.c
>>>>>> +++ b/drivers/thermal/of-thermal.c
>>>>>> @@ -89,6 +89,7 @@ struct __thermal_zone {
>>>>>> /* trip data */
>>>>>> int ntrips;
>>>>>> struct __thermal_trip *trips;
>>>>>> + struct thermal_trip *gtrips;
>> Do we really need this duplication ?
>>>>>>
>>>>>> /* cooling binding data */
>>>>>> int num_tbps;
>>>>>> @@ -152,6 +153,27 @@ bool of_thermal_is_trip_en(struct
>>>>>> thermal_zone_device *tz, int trip) return true;
>>>>>> }
>>>>>>
>>>>>> +/**
>>>>>> + * of_thermal_get_trip_points - function to get access to a
>>>>>> globally exported
>>>>>> + * trip points
>>>>>> + *
>>>>>> + * @tz: pointer to a thermal zone
>>>>>> + *
>>>>>> + * This function provides a pointer to the copy of trip points
>>>>>> table
>>>>>> + *
>>>>>> + * Return: pointer to trip points table, NULL otherwise
>>>>>> + */
>>>>>> +const struct thermal_trip * const
>>>>>> +of_thermal_get_trip_points(struct thermal_zone_device *tz)
>>>>>> +{
>>>>>> + struct __thermal_zone *data = tz->devdata;
>>>>>> +
>>>>>> + if (!data)
>>>>>> + return NULL;
>>>>>> +
>>>>>> + return data->gtrips;
>>>>>> +}
>>>>>> +
>>>>>
>>>>> EXPORT_SYMBOL_GPL(of_thermal_get_trip_points);
>>>>
>>>> Ok.
>>>>
>>>>>
>>>>>> static int of_thermal_get_trend(struct thermal_zone_device *tz,
>>>>>> int trip, enum thermal_trend *trend)
>>>>>> {
>>>>>> @@ -767,6 +789,16 @@ thermal_of_build_thermal_zone(struct
>>>>>> device_node *np) goto free_tbps;
>>>>>> }
>>>>>>
>>>>>> + tz->gtrips = kcalloc(tz->ntrips, sizeof(*tz->gtrips),
>>>>>> GFP_KERNEL);
>>>>>> + if (!tz->gtrips) {
>>>>>> + ret = -ENOMEM;
>>>>>> + goto free_tbps;
>>>>>> + }
>>>>>> +
>>>>>> + for (i = 0; i < tz->ntrips; i++)
>>>>>> + memcpy(&(tz->gtrips[i]),
>>>>>> &(tz->trips[i].temperature),
>>>>>> + sizeof(*tz->gtrips));
>>>>>> +
>>>>>> finish:
>>>>>> of_node_put(child);
>>>>>> tz->mode = THERMAL_DEVICE_DISABLED;
>>>>>> @@ -793,6 +825,7 @@ static inline void of_thermal_free_zone(struct
>>>>>> __thermal_zone *tz) {
>>>>>> int i;
>>>>>>
>>>>>> + kfree(tz->gtrips);
>>>>>> for (i = 0; i < tz->num_tbps; i++)
>>>>>> of_node_put(tz->tbps[i].cooling_device);
>>>>>> kfree(tz->tbps);
>> Couldn't find the code that updates *gtrips as a result of
>> set_trip_temp via
>> sysfs.
>>
>>>>>> diff --git a/drivers/thermal/thermal_core.h
>>>>>> b/drivers/thermal/thermal_core.h index 466208c..a9580ca 100644
>>>>>> --- a/drivers/thermal/thermal_core.h
>>>>>> +++ b/drivers/thermal/thermal_core.h
>>>>>> @@ -91,6 +91,8 @@ int of_parse_thermal_zones(void);
>>>>>> void of_thermal_destroy_zones(void);
>>>>>> int of_thermal_get_ntrips(struct thermal_zone_device *);
>>>>>> bool of_thermal_is_trip_en(struct thermal_zone_device *, int);
>>>>>> +const struct thermal_trip * const
>>>>>> +of_thermal_get_trip_points(struct thermal_zone_device *);
>>>>>> #else
>>>>>> static inline int of_parse_thermal_zones(void) { return 0; }
>>>>>> static inline void of_thermal_destroy_zones(void) { }
>>>>>> @@ -102,6 +104,11 @@ static inline bool
>>>>>> of_thermal_is_trip_en(struct thermal_zone_device *, int) {
>>>>>
>>>>> This produces compilation error when CONFIG_THERMAL_OF is not set.
>>>>> Name the parameters to fix.
>>>>
>>>> As all the other cases, I will fix that.
>>>>
>>>>>
>>>>>> return 0;
>>>>>> }
>>>>>> +static inline const struct thermal_trip * const
>>>>>> +of_thermal_get_trip_points(struct thermal_zone_device *)
>>>>>> +{
>>>>>> + return NULL;
>>>>>> +}
>>>>>> #endif
>>>>>>
>>>>>> #endif /* __THERMAL_CORE_H__ */
>>>>>> diff --git a/include/linux/thermal.h b/include/linux/thermal.h
>>>>>> index 5bc28a7..88d7249 100644
>>>>>> --- a/include/linux/thermal.h
>>>>>> +++ b/include/linux/thermal.h
>>>>>> @@ -303,6 +303,20 @@ struct thermal_zone_of_device_ops {
>>>>>> int (*get_trend)(void *, long *);
>>>>>> };
>>>>>>
>>>>>> +/**
>>>>>> + * struct thermal_trip - Structure representing themal trip points
>>>>>> exported from
>>>>>> + * of-thermal
>>>>>> + *
>>>>>
>>>>> The only problem I have with this name is that would look like it is
>>>>> in use in all thermal framework, which is not really the case. But I
>>>>> do think having a type here is a good thing. So, not sure :-)
>>>>
>>>> It can stay to be struct thermal_trip or we can rename it to
>>>> struct of_thermal_trip.
>>>>
>>>> I'm fine with both names.
>>>
>>> Leave it as 'thermal_trip'.
>>>
>>>>
>>>>>
>>>>>> + * @temperature: trip point temperature
>>>>>> + * @hysteresis: trip point hysteresis
>>>>>> + * @type: trip point type
>>>>>> + */
>>>>>> +struct thermal_trip {
>>>>>> + unsigned long int temperature;
>>>>>> + unsigned long int hysteresis;
>>>>>> + enum thermal_trip_type type;
>>>>>> +};
>>>>>> +
>>>>>> /* Function declarations */
>>>>>> #ifdef CONFIG_THERMAL_OF
>>>>>> struct thermal_zone_device *
>>>>>> --
>>>>>> 2.0.0.rc2
>>>>>>
>>>>
>>>>
>>>>
>>>> --
>>>> Best regards,
>>>>
>>>> Lukasz Majewski
>>>>
>>>> Samsung R&D Institute Poland (SRPOL) | Linux Platform Group
>>>
>>> * Unknown Key
>>> * 0x7DA4E256
>>>
>>
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

Next message: Heiko Stübner: "Re: [PATCH] clk: rockchip: rk3288 export i2s0_clkout for use in DT"
Previous message: tip-bot for Jiang Liu: "[tip:x86/apic] x86, irq: Use hierarchy irqdomain to manage DMAR interrupts"
In reply to: Guenter Roeck: "Re: [PATCH v2 3/4] thermal: of: Extend of-thermal to export table of trip points"
Next in thread: Eduardo Valentin: "Re: [PATCH v2 3/4] thermal: of: Extend of-thermal to export table of trip points"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]