[PATCH 3.4 57/91] can: flexcan: put TX mailbox into TX_INACTIVE mode after tx-complete

[lizf]

From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>

3.4.105-rc1 review patch.  If anyone has any objections, please let me know.

------------------


commit de5944883ebbedbf5adc8497659772f5da7b7d72 upstream.

After sending a RTR frame the TX mailbox becomes a RX_EMPTY mailbox. To avoid
side effects when the RX-FIFO is full, this patch puts the TX mailbox into
TX_INACTIVE mode in the transmission complete interrupt handler. This, of
course, leaves a race window between the actual completion of the transmission
and the handling of tx-complete interrupt. However this is the best we can do
without busy polling the tx complete interrupt.

Signed-off-by: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
[lizf: Backported to 3.4: adjust context]
Signed-off-by: Zefan Li <lizefan@xxxxxxxxxx>
---
 drivers/net/can/flexcan.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/net/can/flexcan.c b/drivers/net/can/flexcan.c
index 681fb9c..b523e65 100644
--- a/drivers/net/can/flexcan.c
+++ b/drivers/net/can/flexcan.c
@@ -633,6 +633,9 @@ static irqreturn_t flexcan_irq(int irq, void *dev_id)
 	if (reg_iflag1 & (1 << FLEXCAN_TX_BUF_ID)) {
 		stats->tx_bytes += can_get_echo_skb(dev, 0);
 		stats->tx_packets++;
+		/* after sending a RTR frame mailbox is in RX mode */
+		flexcan_write(FLEXCAN_MB_CODE_TX_INACTIVE,
+			&regs->cantxfg[FLEXCAN_TX_BUF_ID].can_ctrl);
 		flexcan_write((1 << FLEXCAN_TX_BUF_ID), &regs->iflag1);
 		netif_wake_queue(dev);
 	}
-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/