[PATCH 1/3] staging: comedi: adl_pci9118: simplify interrupt_pci9118_ai_dma() a bit

[Ian Abbott]

Eliminate the `next_dma_buf` variable in `interrupt_pci9118_ai_dma()`.
It holds the next value of `devpriv->dma_actbuf` when double buffering
is used, but we can just set that to the next value directly at the
point where the buffers are switched as the old value is not used
anywhere else.

Signed-off-by: Ian Abbott <abbotti@xxxxxxxxx>
---
 drivers/staging/comedi/drivers/adl_pci9118.c | 24 ++++++++++--------------
 1 file changed, 10 insertions(+), 14 deletions(-)

diff --git a/drivers/staging/comedi/drivers/adl_pci9118.c b/drivers/staging/comedi/drivers/adl_pci9118.c
index 5e0ff9d..aecfae8 100644
--- a/drivers/staging/comedi/drivers/adl_pci9118.c
+++ b/drivers/staging/comedi/drivers/adl_pci9118.c
@@ -608,16 +608,15 @@ static void interrupt_pci9118_ai_dma(struct comedi_device *dev,
 	struct comedi_cmd *cmd = &s->async->cmd;
 	struct pci9118_dmabuf *dmabuf = &devpriv->dmabuf[devpriv->dma_actbuf];
 	unsigned int nsamples = comedi_bytes_to_samples(s, dmabuf->use_size);
-	unsigned int next_dma_buf;
 
-	if (devpriv->dma_doublebuf) {	/*
-					 * switch DMA buffers if is used
-					 * double buffering
-					 */
-		next_dma_buf = 1 - devpriv->dma_actbuf;
-		pci9118_amcc_setup_dma(dev, next_dma_buf);
-		if (devpriv->ai_do == 4)
-			interrupt_pci9118_ai_mode4_switch(dev, next_dma_buf);
+	/* switch DMA buffers and restart DMA if double buffering */
+	if (devpriv->dma_doublebuf) {
+		devpriv->dma_actbuf = 1 - devpriv->dma_actbuf;
+		pci9118_amcc_setup_dma(dev, devpriv->dma_actbuf);
+		if (devpriv->ai_do == 4) {
+			interrupt_pci9118_ai_mode4_switch(dev,
+							  devpriv->dma_actbuf);
+		}
 	}
 
 	if (nsamples) {
@@ -631,11 +630,8 @@ static void interrupt_pci9118_ai_dma(struct comedi_device *dev,
 			s->async->events |= COMEDI_CB_EOA;
 	}
 
-	if (devpriv->dma_doublebuf) {
-		/* switch dma buffers */
-		devpriv->dma_actbuf = 1 - devpriv->dma_actbuf;
-	} else {
-		/* restart DMA if is not used double buffering */
+	/* restart DMA if not double buffering */
+	if (!devpriv->dma_doublebuf) {
 		pci9118_amcc_setup_dma(dev, 0);
 		if (devpriv->ai_do == 4)
 			interrupt_pci9118_ai_mode4_switch(dev, 0);
-- 
2.1.3

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/